diff options
Diffstat (limited to '.Attic/README.old_stage2')
| -rw-r--r-- | .Attic/README.old_stage2 | 259 |
1 files changed, 1 insertions, 258 deletions
diff --git a/.Attic/README.old_stage2 b/.Attic/README.old_stage2 index d5899f5..eb2a232 100644 --- a/.Attic/README.old_stage2 +++ b/.Attic/README.old_stage2 @@ -1,107 +1,12 @@ # old stage 2 based on a broken stage 1, so carefull what to pick # into the next version.. -####################################### -##### TODO FROM HERE -####################################### - -# TODO: m4. autoconf, automake, libtool are not really bootstrappable in x-tools -# basic packages, non-virtual one from above: kernel, shell, pacman, editor, coreutils, development -# tools (some of them can be bootstrapped inside like the autotools, perl; and they also should!) - -# linux-headers is important so we can build kmod inside the chroot -# linux itself is tricky. For now we will boot with direct kernel parameters and binary in libvirt/qemu - -PACKAGES= \ - \ - \ -libffi" - -### -TODO FROM HERE - - # TODO: - # autoreconf needs autotools/m4 and dependencies (crosstool-ng autotools are broken for me)\ - # libunistring for gettext - # libffi for glib2 - pushd $HOME/x-tools/i486-unknown-linux-gnu/i486-unknown-linux-gnu/sysroot - bsdtar xf $STAGE1_CHROOT/packages/i486/autoconf-2.69-4-any.pkg.tar.gz - bsdtar xf $STAGE1_CHROOT/packages/i486/automake-1.15.1-1-any.pkg.tar.gz - bsdtar xf $STAGE1_CHROOT/packages/i486/libffi-3.2.1-2-i486.pkg.tar.gz - popd - - cd .. -done - - -# special patches for some packages -################################### - -# autoconf needs help2man, checks need fortan (wow. that package is old!) -# depends contains base-devel stuff?! diffutils -sed -i 's@makedepends\(.*\)@#makedepends\1@g' autoconf/PKGBUILD -sed -i 's@checkdepends\(.*\)@#checkdepends\1@g' autoconf/PKGBUILD -sed -i 's@depends\(.*\)@#depends=\1@g' autoconf/PKGBUILD - -# automake needs dejagnu for testing, not now, disabling checks -sed -i 's@checkdepends\(.*\)@#checkdepends\1@g' automake/PKGBUILD - -# libool: trusting the toolchain here, no silly checks :-) -sed -i 's@makedepends\(.*\)@#makedepends\1@g' libtool/PKGBUILD - -# afterpatching; autreconf has a hard-coded #! /bin/perl -w bang, -# seriously! -chmod u+w /home/cross/x-tools/i486-unknown-linux-gnu/i486-unknown-linux-gnu/sysroot/usr/bin/autoreconf -sed -i 's@^#/bin/perl@/home/cross/x-tools/i486-unknown-linux-gnu/i486-unknown-linux-gnu/sysroot/usr/bin/perl@g' \ - /home/cross/x-tools/i486-unknown-linux-gnu/i486-unknown-linux-gnu/sysroot/usr/bin/autoreconf - - -# glib2 -####### -# take gettext from host -sed -i 's@makedepends\(.*\)@#makedepends\1@g' glib2/PKGBUILD -# get arch-meson wrapper, doens't build without it! -# ok, forget meson, completly broken, resorting to autotools. -# autoreconf: running: /home/cross/x-tools/i486-unknown-linux-gnu/bin/autoconf --force -# configure.ac:88: error: possibly undefined macro: AC_DEFINE -# huh? -# retooling seems to be near impossible! ok, autoconf broken, meson unusable.. sweet -Found pkg-config: /bin/pkg-config (0.27.1) -Dependency libpcre found: NO -Library m found: YES -Not looking for a fallback subproject for the dependency libffi because: -Automatic wrap-based fallback dependency downloading is disabled. - -Meson encountered an error in file meson.build, line 1439, column 0: -Native dependency 'libffi' not found -==> ERROR: A failure occurred in build(). - Aborting... -=> this is all very wrong! - -# libarchive calls autoreconf, this is quite annoying as perl in crosstool-nt or -### -# stil in phase two, no proper autotools, let's apply the out-of-chroot trick once more.. -# do the autoreconf -fi outside, create a package libarchive-3.3.2-retooled.tgz -# libarchive has trouble with wchar_t (and has quite some other trouble around autoconf it seems) -# remove the wchar_t and wchar_t sizeof test in configure.ac manutally before retooling -# and of course tests fail! -# no checks again -sed -i "s@^source=.*@source=('libarchive-3.3.2-retooled.tgz')@g" libarchive/PKGBUILD -sed -i "s@^sha256sums=.*@sha256sums=('1f856e6f5cc0e1479f381e381a031ba19d09f80b51ac88e74b2c140fc78606e8')@g" libarchive/PKGBUILD -sed -i 's@autoreconf@#autoreconf@g' libarchive/PKGBUILD # generic build ############### for p in $PACKAGES - # for some packages we cannot execute tests (because the dependencies to install in - # the toolchain environment would be too much) - # autoconf: --nocheck - # automake: --nockeck - # pacman: --nocheck - # mpfr: --nocheck - # for ncurses, readline for bash # autoreconf needs autotools/m4 and dependencies (crosstool-ng autotools are broken for me) # libunistring for gettext @@ -163,11 +68,6 @@ arch-chroot /home/cross/i486-root/ # package specific things - -# xz -# with gcc 7.2 we get new errors -sed -i 's@--enable-werror@--disable-werror@g' xz/PKGBUILD - # bc # requires texinfo, is this part of base-devel? # bootstrap --force @@ -225,17 +125,6 @@ zlib for now. # gtk-doc draws in Gnome bullshit again sed -i 's@^makedepends\(.*\)@#makedepends\1@g' kmod/PKGBUILD -# libtirpc: break the cyrcle with systemd (via krb5) -sed -i 's@^makedepends\(.*\)@#makedepends\1@g' libtirpc/PKGBUILD -sed -i 's@^depends\(.*\)@#depends\1@g' libtirpc/PKGBUILD -# configure: error: gssapi.h not found. Use --disable-gssapi, or install GSS-API. -# --disable-gssapi - -# pam: -# dependency w3m is for documentation, let's remove it -rm: cannot remove '/build/pam/pkg/pam/usr/share/doc/Linux-PAM/sag-pam_userdb.html': No such file or directory -also remove section in PKGBUILD - # inetutils: # disable checks @@ -292,18 +181,6 @@ sed -i 's@^checkdepends\(.*\)@#checkdepends\1@g' perl-error/PKGBUILD # no docu # --disable-man -# git -sed -i 's@^makedepends\(.*\)@#makedepends\1@g' git/PKGBUILD -# no make doc -# disable most things in build -# disable doc in install-doc -# NO_GETTEXT=1 -# --nocheck -=> no luck - -# lz4: -# git tweaking again, use 1.8.0 tarball - # tar: # checking whether mknod can create fifo without root privileges... configure: error: in `/build/tar/src/tar-1.29': # configure: error: you should not run configure as root (set FORCE_UNSAFE_CONFIGURE=1 in environment to bypass this check) @@ -312,14 +189,9 @@ sed -i 's@^makedepends\(.*\)@#makedepends\1@g' git/PKGBUILD sed -i 's@./configure@FORCE_UNSAFE_CONFIGURE=1 ./configure@g' tar/PKGBUILD #TODO: -# lz4 -# git package again -sed -i 's@^makedepends\(.*\)@#makedepends\1@g' lz4/PKGBUILD -#TODO: cracklib util-linux e2fsprogs libldap keyutils krb5 they end in circlejerk with systemd! +#TODO: libldap keyutils krb5 they end in circlejerk with systemd! # we will solve that later by building a non-systemd version and then bootstrapping first systemd -# git: out of reach for now, far too many dependencies -perl-error git # for now we don't rebuild ca-certificates, we had to copy them funilly anyway, and it's # just a bunch of certs. So, in phase 3 or 4 then.. @@ -363,57 +235,6 @@ sed -i 's/mycarch="i686"/mycarch="i486")/g' pacman/PKGBUILD sed -i 's/mychost="i686-pc-linux-gnu"/mychost="i486-pc-linux-gnu"/g' pacman/PKGBUILD sed -i 's/myflags="-march=i686"/myflags=-march=i486/g' pacman/PKGBUILD -# coreutils -########### -sed -i 's@./configure@FORCE_UNSAFE_CONFIGURE=1 ./configure@g' coreutils/PKGBUILD - -# TODO: needed in stage 2? -# apply man generation patch (one has to wonder, is it maintained at all?) -# help2man errors: help2man: can't get `--help' info from man/chmod.td/chmod -# http://ftp.lfs-matrix.net/pub/clfs/conglomeration/coreutils/coreutils-8.28-noman.patch -# based on a patch by William Harrington (kb0iic at cross-lfs dot org) 2014-10-30 for coreutils 8.23 -#sed -i 's@source=(@source=(coreutils-8.28-noman.patch @' PKGBUILD -#sed -i "s@md5sums=(@md5sums=('SKIP' @" PKGBUILD -#sed -i '/build()/ i \ prepare() { \n\ cd ${pkgname}-${pkgver}\n\ patch -Np1 < ${srcdir}/coreutils-8.28-noman.patch \n }' PKGBUILD - -# zlib -###### -strip: /lib/libz.so.1: no version information available (required by /lib/libbfd-2.29.1.so) -=> this is because some tools are built with other versions (toolchain vs. chroot) -=> so we must not install zlib before we rebuild binutils - -# util-linux -############ -# disable some dependencies on systemd, python, PAM (chfn_chsh) -# and other stuff we don't need -# libtool seems broken -sed -i 's@makedepends\(.*\)@#makedepends\1@g' PKGBUILD -sed -i 's@ \+depends\(.*\)@#depends\1@g' PKGBUILD -sed -i 's@--with-python=3@--without-python \\@g' PKGBUILD -sed -i '/--without-python/ a \ --without-systemd --without-systemdsystemunitdir' PKGBUILD -sed -i 's@./configure@./configure --host=i486-unknown-linux-gnu@g' PKGBUILD -sed -i '/--without-python \\/ a \ --disable-chfn-chsh \\' PKGBUILD -sed -i '/--without-python \\/ a \ --disable-shared --enable-static \\' PKGBUILD -sed -i 's@\(chmod 4755 "$pkgdir"/usr/bin/{newgrp,ch{sh,fn}}\)@#\1@g' PKGBUILD -sed -i "s@\(sed -i '/ListenStream.*\)@#\1@g" PKGBUILD -sed -i 's@\(rm "$pkgdir.*\)@#\1@g' PKGBUILD -# chgrp: chgrp: invalid group: 'tty'invalid group: 'tty' -# /etc/group belongs to filesystem, but has only a root entry when installed -=> filesystem package: post.install hook has not been executed (filesystem.install) -=> for now do it manually -groupadd -g 5 tty -# IMPORTANT DNAGER: the test suite is crazzy and destroys the host!! use --nocheck -# packaging generates tons of errors, lets hope, they are not critical. -# cp: omitting directory ‘/’ -# => at least util-linux needs !strip OPTIONS (makepkg-i486.conf) -#rm "$pkgdir"/usr/lib/lib*.{a,so}* - -# pcre -###### -# no C++ -sed -i 's@./configure@./configure --disable-cpp@g' pcre/PKGBUILD -# --nocheck as we have trouble to find shared libraries - # gmp ##### # no C++ @@ -440,54 +261,14 @@ sed -i 's@\(ln -sf ssh.1.gz.*\)@#\1@g' PKGBUILD # git ##### # manual PKGBUILD fix -# install: cannot stat 'contrib/credential/libsecret/git-credential-libsecret': No such file or directory -# => PKGBUILD is a mess, sorry! -# no asciidoc, as this needs python2 -#asciidoc -b docbook -d manpage -f ../../Documentation/asciidoc.conf \ -# -agit_version=2.15.0 git-subtree.txt -# disable make install-doc #make: pkg-config: Command not found #make: pkg-config: Command not found #make: Leaving directory '/build/git/src/git-2.15.0/contrib/subtree' -#mv: cannot stat '/build/git/pkg/git/usr/share/perl5/site_perl/Git/*': No such file or directory -=> hack away python, perl, systemd, contrib, docu and other things we don't need right now - -git clone... -Cloning into 'strusBase'... -fatal: cannot run ssh: No such file or directory -fatal: unable to fork -fatal: Unable to find remote helper for 'https' -fatal: Unable to find remote helper for 'http' -=> we need ssh # tcl ##### # disable tests: cynical, disable unit tests of a software needed for testing -# autoconf -########## -# checks need fortan (wow. that package is old!) -# depends contains base-devel stuff?! diffutils -sed -i 's@makedepends\(.*\)@#makedepends\1@g' autoconf/PKGBUILD -sed -i 's@checkdepends\(.*\)@#checkdepends\1@g' autoconf/PKGBUILD -# not bad, but lets disable testing for now: -# ERROR: 455 tests were run, -# 5 failed (4 expected failures). -# 48 tests were skipped. - -# automake -########## -# automake needs dejagnu for testing, not now, disabling checks -sed -i 's@checkdepends\(.*\)@#checkdepends\1@g' automake/PKGBUILD -# TOTAL: 2901 -# PASS: 2673 -# SKIP: 164 -# XFAIL: 41 -# FAIL: 21 -# XPASS: 0 -# ERROR: 2 -=> ok, but let's disable testing - # dejagnu ######### # has hard-wired AC_PROG_CXX in configure, remove internal C++ tests @@ -676,10 +457,6 @@ test.c:1:10: fatal error: stdio.h: No such file or directory # END TODO: gcc -# libtool -######### -# patched heavily again, git version cannot be bootstrapped use official tarball - # glibc ####### # use 2.25 version, not 2.26. Keep the ABI intact! @@ -743,10 +520,8 @@ for p in $PACKAGES # libxslt: --nocheck # inetutils: --nocheck # bison: --nocheck - # libarchive: --nocheck # pacman: --nocheck # util-linux: --nocheck - # pcre: --nocheck # gawk: --nocheck # tcl: --nocheck @@ -783,9 +558,6 @@ done ln -s /usr/bin/ld /usr/lib/gcc/i486-unknown-linux-gnu/7.2.0/ld etc. -# libz.so missing? -ln -s libz.so.1 /usr/lib/libz.so - # aftermatch for glibc # bacause pacman cannot set file permissions @@ -830,32 +602,3 @@ git: https helpers chmod 0777 /usr/lib/git-core/git-remote-* later: for inside the chroot - -# uname module hack -################### - -# as root -# we need i486, so setarch doesn't work for us, because it emulates only, -# a i686, use the hacked uname kernel module: -wget http://clfs.org/files/extras/uname_hack-20080713.tar.bz2 -tar xf uname_hack-20080713.tar.bz2 -cd uname_hack -# swap memset arguments: -# /root/uname_hack/uname_hack.c:50:2: warning: 'memset' used with constant zero length parameter; this could be due to transposed parameters [-Wmemset-transposed-args] -# memset(uname_hack_uts_machine, uname_hack_uts_machine_len, '\0'); -# ^~~~~~ -# Building modules, stage 2. -make uname_hack_fake_machine=i486 -insmod uname_hack.ko -#lib/config.guess in automake returns i486-pc-linux-gnu -# uname -m returns i486 -cd .. - -# patch our hosts pacman.conf, so it doesn't get fooled by the architecture hack -sed -i 's@^Architecture.*@Architecture = x86_64@g' /etc/pacman.conf - -# optional packages for stage 1 -# TODO: do we need this for old machines? -# linux-firmware -# use git from the host for now -#sed -i 's@makedepends\(.*\)@#makedepends\1@g' linux-firmware/PKGBUILD |