summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2011-02-27pactest for removing a required empty directoryAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Add test case for util-linux/util-linux-ng name switch and depsDan McGee
This case currently fails, but highlights a failure in our install process I experienced the other day. Because we don't do replacement uninstalls inline with the rest of the upgrade uninstalls, we can have a time on our system where a critical package is not installed. I hope no one ever renames glibc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Continue resolving dependencies rather than bailing on first errorDan McGee
This allows error messages emitted by the frontend to be a bit more descriptive and not have the annoying "well why didn't you tell me that the first time" problem. If a package had multiple missing deps, we would bail on the first one before rather than finish processing all missing dependencies, and only print one error message. Instead, continue through this entire set of missing deps and append all eventual errors. The added pactest tests this case, as the to be installed package has two missing dependencies. However, pactest does not actually test or see the difference in output from before and after, so it passes in both cases, but it is clearly visible in the logs. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Various small spelling fixes and small tweaksDan McGee
Nothing that changes behavior here. Spelling fixes and pushing a variable down to the scope it is used. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Add a new removal smoke testDan McGee
Hint: this will really stress hash table removal. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31make -d less strict; add -dd optionFlorian Pritz
-d skips checking the version of a dependency. -dd skips the whole dependency check. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Florian Pritz <bluewind@server-speed.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31add pactests for -SddXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Allow both cleanmethod values to be specified at the same timeDan McGee
No reason to disallow this- it allows keeping even more packages around in the cache. Test cases included for this case and to ensure the default behavior is preserved. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Add three clean cache testsDan McGee
The first two are rather standard tests of our two available clean options, and the third is attempting to test a reported bug (and failing to make the given case fail). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31pactest: allow checking for cache file existenceDan McGee
This will allow some tests to be added for cache cleaning. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29pacman/sync: rewrite target handlingXavier Chantry
This uses the new public functions to handle targets from the frontend, like it used to be : 1) alpm_find_dbs_satisfier to find (optionally versioned) package or provision 2) alpm_find_grp_pkgs to find members for a groups 3) alpm_add_pkg to finally add the pmpkg_t from 1 or 2 Of course, this adds more code to the frontend, but it completely deprecates sync_target and sync_dbtarget interfaces. This all-in-one interfaces felt wrong and left no control to the frontend. A good frontend should just use alpm_add_pkg, with pkg coming from alpm_db_get_pkg (for normal targets), alpm_find_dbs_satisfier (for versioned provisions) or alpm_find_grp_pkgs (for groups). This also opens the way to provide a better group handling in pacman without constraint from libalpm and callbacks. In ignore006, only the retcode changes, because no package was found to satisfy the target (the only possible package is ignored). Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Add interactive provider selectionXavier Chantry
If there are multiple providers in one db, pacman used to just stop at the first one (both during dependency resolution or for pacman -S 'provision' which uses the same code). This adds a new conversation callback so that the user can choose which provider to install. By default (user press enter or --noconfirm), the first provider is still chosen, so for example the behavior of sync402 and 403 is preserved. But at least the user now has the possibility to make the right choice in a manual run. If one of the provider is already installed, it is picked for reinstall/upgrade, so that provision 002/003 pactest now pass. $ pacman -S community/smtp-server :: There are 3 providers available for smtp-server: 1) courier-mta 2) esmtp 3) exim Which one do you want to install? Enter a number (default=1): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pactest: pass entire test to rule.check()Dan McGee
We were piecemeal passing fields from the test object in and it was getting out of hand, and future work would have added yet another argument. Instead, just pass the entire test object and entrust the rule to get what it needs. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Add a few new provides testsDan McGee
These deal with already-installed packages and how they should be the preferred provider in cases where provider selection now occurs. A few involve multiple sync repos. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: sort repos by alpha order in config fileDan McGee
The order was non-deterministic before, and just happened to work for sync023.py as it was written. Ensure there is some sort of predictable ordering. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: use new-style python classesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: revamp modified logicDan McGee
Remove all logic dealing with PKG_MODIFIED as this rule no longer exists. This removes a bunch of unnecessary stat and checksum logic that most of the time we were never even using. Also update the file modified checks to mark every file created using mkfile() with an older time so any modified checks will just work without hacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Modify all pactests to not use PKG_MODIFIEDDan McGee
All conditions that this particular rule tested are better served by using a more specific rule, whether that be checking a package version or whether files inside the package have changed or still exist. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmdbDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for utilDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmtestDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmpkgDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmruleDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmenvDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pactestDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmfileDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Remove epoch as an independent fieldDan McGee
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Allow version comparison to contain epoch specifierDan McGee
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also borrow some of their parsing code for our purposes (thanks!). Add some new tests to our vercmp shell script tester for epoch comparisons, and then make the code work with these newfangled epoch specifiers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21pactest: add more testing for epochDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21pactest: Rename epoch pactestsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Add a pactest for the situation in FS#7524Dan McGee
Confirming the current behavior. And yes, the error message is still no better than it was when this was reported 3.5 years ago. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Add two pactests with non-trivial file countsDan McGee
These are probably useful anyway, but also exposed the double file list bug that will be fixed in a later commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11pactest: build the filelist using a set()Dan McGee
This will prevent duplicates, which we had plenty of once I made a few tests that had a list of files greater than the normal two. The previous logic was not working quite right. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10pactest: correctly write epoch and force as necessaryDan McGee
We were missing this in a few places; also add the ability to check the outcome via a new rule type. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05pactest: Use booleans where it makes senseDan McGee
No need to use 0/1 when we can use False/True for the force option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05pactest: remove dead functionDan McGee
Stopped being used after commit fa933df65b9. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/sync.c test/pacman/tests/ignore007.py
2010-12-30Respect Ignore{Pkg,Group} for group membersJakob Gruber
Fixes FS#19854. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Tests: Sync group which includes ignored pkgsJakob Gruber
* FS#19854 (--ignore is ignored with groups) * http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html (operation aborts when a package from a group is ignored/and user chooses not to install it) If a group member is ignored, we expect a) a question whether to install b) after saying 'no' to a), the ignored member not to be installed c) all other group members to be installed d) pacman to execute successfully Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 9d0b33fd3327ae6d2b15f50870c0885a2068d492)
2010-12-21Add pactest to test long archive readsDan McGee
This creates two packages with extremely long description lines (500KB and 600 KB), causing our archive read code to perform reallocation to store the whole contents. One of the packages will successfully read while the other will fail for the time being. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21pactest: allow testing of package descriptionDan McGee
And modify the code to not print the full rule string if it is more than 40 characters long; truncate it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Update pactest suite for change in db structureAllan McRae
Merging desc and depends files in sync and local db. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12alpm/remove.c : respect --dbonly during remove-upgradeXavier Chantry
When a -Sk or -Uk operation induced a removal of an existing local package, --dbonly was not in effect and the files were all removed. Fixing this behavior was already marked as TODO in database012 pactest ------------ TODO: I honestly think the above should NOT delete the original les, it hould upgrade the DB entry without touching anything on the file stem. E.g. this test should be the same as: pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz ------------ Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchup] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18pactest: use valgrind.supp fileXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18Tests: '-S repo/group' syntaxJakob Gruber
when calling '-S repo/group', only group members in <repo> should should be installed (group members in other repos are ignored) Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18Tests: Sync group which includes ignored pkgsJakob Gruber
* FS#19854 (--ignore is ignored with groups) * http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html (operation aborts when a package from a group is ignored/and user chooses not to install it) If a group member is ignored, we expect a) a question whether to install b) after saying 'no' to a), the ignored member not to be installed c) all other group members to be installed d) pacman to execute successfully Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Add several pactests for epoch codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Add epoch support to pactestDan McGee
This adds epoch support to pactest, while still producing packages and database entries the same way makepkg and repo-add currently do in a backward compatible fashion (still including the 'force' option). Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11CLI args: reorganize parsingJakob Gruber
Split parsing of CLI arguments into separate functions: parsearg_op (operations) parsearg_global (global options) parsearg_{database,query,remove,sync,deptest,upgrade} Organization strictly follows the manpage (even where the manpage is incorrect) - these cases will be fixed in the following commits. Switch cases are copy/pasted and statements unrelated to chosen operation are deleted. Parsing logic adjusted as follows: 1) Parse operation 2) If we can bail out early (duplicate op, help/version requested) do so 3) Parse arguments again: foreach arg: if arg is operation: continue tryparse_args_specific_to_op if unsuccessful tryparse_args_global if unsuccessful print error message and exit Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11pactest: fix typo in ignore001Xavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>