summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2008-08-23download : disable progressbar when total is unknown.Xavier Chantry
This is a work around for FS#8725. There are some bad combination of proxies and mirrors where the Content Length is not returned, and thus the progress bar can't be displayed correctly. Dan: Note that this patch also adds a "downloading" message when the progress bar is disabled, which was formerly not indicated at all in the output. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman : clarify help message.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman: print optdepends on install and upgrade.Xavier Chantry
This implements FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Add new list_display_linebreak functionNagy Gabor
list_display puts several members on the same line, which is not appropriate for optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 The new list_display_linebreak function puts every member on its own line, which is much better with optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: implement this new behavior as a new function rather than as a parameter of list_display] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Move the the description parsing logic to string_display()Nagy Gabor
So dump_pkg_full will indent all strings correctly. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: add string_length function] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19pacman.c: fix typo s/NoPassiveFTP/NoPassiveFtpXavier Chantry
This fixes FS#11203. The doc has always mentioned NoPassiveFtp, but an inconsistency was introduced with commit 76f816b9f764434d02e90207ee4656ebae2b6a8c when case sensitive comparision was introduced, and was only found after commit b3e6cf652c9e989badaf5499abb1d64c1a110927 which dropped the case insensitive comparison. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13pacman/callback.c : fix detection of totaldownloadXavier Chantry
This fixes FS#11180. The usage of the total percent was detected like this : /* use disp_percent if it is not 0, else show bar_percent */ However, it is very possible that the total percent is 0 at the beginning, if the first packages downloaded are very small compared to the total download. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Remove UseColor from front-endNagy Gabor
This option wasn't used. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24Show number of packages to be installed / removed.Xavier Chantry
This fixes FS#7794. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24src/pacman : rework the display_targets function.Xavier Chantry
We had a lot of duplicated code here. The code handling the showsize option needed to be there three times : 1) for install part of -S 2) for remove part of -S (conflict removal) 3) for -R This patch introduce a new display_targets(pkglist, install) function which can handle the 3 cases above. We pass install == 1 for case 1), and install == 0 for case 2) and 3). Now we can finally get the benefit of an old patch which handled the ShowSize option consistently in the 3 cases above, without an awful lot of duplicated code : http://www.archlinux.org/pipermail/pacman-dev/2008-January/011029.html Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-22-Sqg and -QqgNagy Gabor
With --quiet, "pacman -Sg grp" and "pacman -Qg grp" don't list group names. Note that "pacman -Qgq" and "pacman -Sggq" (without targets) still list group names becuase their output would not be very useful without them. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-22Re-enable --debug with -Sw and -SpNagy Gabor
Commit 874190827676e3a974e8c5fef6c51b9e9d6b60fa disabled --debug in these cases. We just clear PM_LOG_WARNING flag now. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-15Remove pacman.static build from build filesDan McGee
This presents plenty of problems on OSes besides Linux, and even on Linux when the libtool file for libarchive isn't present. The static build isn't all that useful anyway as missing something such as glibc will still leave you unable to run the pacman.static binary. Remove it from the formal build process. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-13src/pacman/sync.c : Display only errors with -Sp and -Sw operations.Xavier Chantry
In particular, this avoids warnings cluttering the output of these operations. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-13sync_addtarget reworkNagy Gabor
Now '-S provision' handling is done in the back-end. In case of multiple providers, the first one is selected (behavior change: deleted provision002.py). The old processing order was: literal, group, provision; the new one: literal, provision, group. This is more rational, but "pacman -S group" will be slower now. "pacman -S repo/provision" also works. Provision was generalized to dependencies, so you can resolve deps by hand: "pacman -S 'bash>2.0'" or "pacman -S 'core/bash>2.0'" etc. This can be useful in makepkg dependency resolving. The changes were documented in pacman manual. alpm_find_pkg_satisfiers and _alpm_find_dep_satisfiers functions were removed, since they are no longer needed. I added some verbosity to "select provider instead of literal" and "fallback to group". Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-13remove_addtarget rework (in front-end)Nagy Gabor
Now "pacman -R foo" first searches for literal, and then for group. This is faster in most cases, see: http://www.archlinux.org/pipermail/pacman-dev/2008-July/012311.html "-R group" implementation was broken, since alpm_grp_get_pkgs returns with an pmpkg_t list, not a string list. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-07Swap parameters on PM_TRANS_CONV_INSTALL_IGNOREPKG callback functionNagy Gabor
PM_TRANS_CONV_INSTALL_IGNOREPKG callback function can get 2 params: foo, bar in this order (packages), bar can be NULL. Old API: foo, NULL: Do you want to install foo from IgnorePkg? foo, bar: foo requires bar from IgnorePkg. Do you want to install bar? New API: foo, bar: Do you want to install foo from IgnorePkg? (If bar!=NULL:) bar requires it. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15Use access() instead of stat() when possibleDan McGee
We were using the stat() system call in quite a few places when we didn't actually need anything the stat struct returned- we were simply checking for file existence. access() will be more efficient in those cases. Before (strace pacman -Ss pacman): % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 33.16 0.005987 0 19016 stat64 After: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 34.85 0.003863 0 12633 1 access 7.95 0.000881 0 6391 7 stat64 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Various updates needed prior to a new releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-05Reformat -Sg output to look like -QgDan McGee
We used list_display() on -Sg output, which might have been slightly nicer looking but made it much harder to parse in something like a shell script. Reformat it in the 'grpname pkgname' format that -Qg is already using. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Don't display filename on -Qip operation.Xavier Chantry
Some previous commits apparently broke the get_filename function for package loaded with pkg_load (on a -Qip operation) because this field was no longer filled. Now pkg_load fills it. But the -Qip operation needs to be run like this : -Qip <filename>, so the filename is already known. There is no need to display it again. Besides, on a normal -Qi operation, the filename is not displayed either because this information is not stored in the local database. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04src/pacman/sync.c : cleanup of pacman_syncXavier Chantry
By putting the search / group / info / list operations just after the -Sy op, we can simplify several checks : 1) the check for "missing targets". Since we took care of the above operations, we now have less cases to consider : * -Syu or -Su : we can proceed * -Sy : we can end now (this is actually a bugfix) * -S : this op requires targets, so exit with an error 2) the check to see if a transaction is needed. If we arrive at the end of the function, it is either because we have -Su or -S <targets> so we already know a transaction is needed there. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Reimplement TotalDownload functionalityDan McGee
Add a new totaldlcb callback function to libalpm and make pacman utilize it when the TotalDownload option is enabled. This callback function is pretty simple- it is meant to be called once at the beginning of a "list download" action, and once at the end (with value 0 to indicate the list has been finished). The frontend is responsible for keeping track of adding individual file download amounts to the total xfered amount in order to display some sort of overall progress. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Use correct C type for file sizesDan McGee
We have been using unsigned long as a file size type for a while, which works but isn't quite correct and could easily break. Worse was probably our use of int in the download callback functions, which could be restrictive for packages > 2GB in size. Switch all file size variables to use off_t, which is the preferred type for file sizes. Note that at least on Linux, all applications compiled against libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS is defined to be 64 or there will be some weird issues that crop up. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31Allow GIT version to be used in pacman buildsDan McGee
Add a new configure flag, --enable-git-version, that allows the output of 'git describe' to be used in the version string associated with this package. This could aid in debugging for users that are using a development version of pacman and we should be able to figure out which cut of code they are using. Sample output: $ pacman --version Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1 $ makepkg --version makepkg (pacman) 3.1.4-190-g5861-dirty Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Add missing NULL set in group printingDan McGee
If we don't set the pkgname var to NULL, we run into all sorts of beautiful segfault behavior when a group spans multiple repositories and we try to print out the location of the former list. Easy fix. This regression was introduced in bf8670036907b3ede18d37b7a3f0f7e14542a5ac. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Remove PM_TRANS_EVT_EXTRACT_START.Xavier Chantry
This event was unused, was missing the equivalent EXTRACT_DONE event, and was useless because we already have ADD / UPGRADE START and DONE events. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-14Disable geteuid in cygwin.Xavier Chantry
This is one of those rare cases where we actually want to code in a platform-specific #ifdef. Because you don't need to be the root user on a Windows box, and fakeroot doesn't exist so we can do easy testing, lets disable any checking of the UID. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Add SyncFirst option.Chantry Xavier
This patch offers a way to fix FS#9228. By putting "SyncFirst = pacman" in pacman.conf, the version check will happen before the transaction really starts, and before any replacements is made. Otherwise, no version check is done. The sync301 pactest was updated to use this SyncFirst option. Example session with SyncFirst = pacman, and a newer pacman version available : $ pacman -Su (or pacman -S <any targets>) :: the following packages should be upgraded first : pacman :: Do you want to cancel the current operation :: and upgrade these packages now? [Y/n] resolving dependencies... looking for inter-conflicts... Targets: pacman-x.y.z-t Total Download Size: x.xx MB Total Installed Size: x.xx MB Proceed with installation? [Y/n] n As Nagy previously noted, doing this check on any -S operations might look intrusive, but it can be required. For example, the case where you want to install a package with versioned provisions, using a pacman version which didn't support that feature yet (and there is already a newer pacman in sync db supporting it). Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Cleanup usages of alpm_list_find and alpm_list_remove.Chantry Xavier
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and _alpm_grp_cmp * new alpm_list_remove_str function, used 6 times in handle.c * remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by a more general alpm_find_pkg_satisfiers with a cleaner implementation. before: alpm_db_whatprovides(db, targ) after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ) * remove satisfycmp and replace alpm_list_find + satisfycmp usage by _alpm_find_dep_satisfiers. before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp) after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep) * remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead. This commit actually get rids of all complicated and asymmetric _cmp functions. I first thought these functions were worth it, be caused it allowed us to reuse list_find and list_remove. But this was at the detriment of the clarity and also the ease of use of these functions, dangerous because of their asymmetricity. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-11Make all error messages use pm_fprintfAllan McRae
Tested using many easily generated error conditions. Also added "malloc failure" (conf.c) and "segmentation fault" (pacman.c) error messages for translation. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> [Dan: fix trailing whitespace errors, other compilation issues] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-10Update makepath to remove PATH_MAX usageDan McGee
The start of a few commits to remove some PATH_MAX usage from our code. Use a dynamically allocated string instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-08pacman-side code cleanupsDan McGee
When taking a look at PATH_MAX usage, I found a few small things we can clean up or fix. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26Completely rework delta algorithmChantry Xavier
Using the graph structures that Nagy set up for dependency sorting, we now do a similar process for deltas. Load up all of the deltas into a graph object on which we can then apply Dijkstra's algorithm, using the new weight field of graph struct. We initialize the nodes weight using the base files that we can use in our filecache (both filename and md5sum must match). The algorithm then picks the best path among those that can be resolved. Note that this algorithm has a few advantages over the old one: 1. It is completely file agnostic. These delta chains do not have to consist of package files- this could be adopted to do delta-fied DBs. 2. It does not use the local_db anymore, or even care if a package or file is currently installed. Instead, it only looks in the filecache for files and packages that match delta chain entries. Original-work-by: Dan McGee <dan@archlinux.org> Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-04-26Refactor the trans init and release code.Chantry Xavier
The calls to alpm_trans_init and alpm_trans_release (+ error checking) were duplicated between remove.c, sync.c and upgrade.c This patch introduces trans_init and trans_release functions in util.c to have this code just once. So instead of having to do the same change 3 times for fixing FS#10273, I just had to do it once (so I did it too :)) Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-15Merge branch 'maint'Dan McGee
2008-04-15More non-Linux build updates, mostly DarwinDan McGee
Darwin's binary format does support symbols with differing visibilities, but it does not support the protected or internal visibilities- only hidden. For Darwin only, we should fall back to this visibility to prevent warnings from the compiler and because it is close enough for our library purposes. See http://gcc.gnu.org/viewcvs/*checkout*/trunk/gcc/config/darwin.c, search for the "darwin_assemble_visibility" function for more details. Also add pacman.static.exe to gitignore. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-14Fix gettext on non-Linux platformsDan McGee
Linux includes all the gettext stuff in glibc, so there is no need for the libintl links which we failed to include in our linker variables. Update the makefiles which should enable NLS support on all platforms, including OS X and Cygwin. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Update configure.ac to current codeDan McGee
Remove a few functions and things that were unnecessary, update the help line calls to the current function name, and make the small change to pacman.c for the signal handler return type that is defined in config.h. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Merge branch 'maint'Dan McGee
2008-04-07Add check for swprintf() and a workaround when it is missingDan McGee
We use this function once in our codebase, but fortunately the workaround is relatively easy. swprintf() is not available on Cygwin so the compile failed there, but we can do a series of mbstowcs() calls that produce the same end result as the swprintf() call. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-07Add *.exe ignores for certain other platformsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06libalpm error cleanup, step 1Dan McGee
Remove unused error codes, begin refactoring some of the others. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06Remove libdownload reference from pacman frontendDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06Add quiet printout to --owns functionalityDan McGee
If we specify -q/--quiet on an --owns operation, only print a matching package name rather than the verbose human-readable message. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-30Enable display of multiple groups in -Ss and -Qs outputDan McGee
Not too complicated of a fix, but just adds some code to loop over the entire group list and space it out. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-30Fix segfault on -Qs usageDan McGee
This segfault creeped in as a result of commit bf867003. We were incorrectly assuming the group member of our package was a pmgrp_t list when in fact it is just a string list, which caused a segfault on any -Qs operation. Also slightly cleanup the -Ss code (which was originally correct unlike the -Qs code). Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-23Merge branch 'maint'Dan McGee
2008-03-23strsplit(): memleak fixDan McGee
We dup-ed the string but then duped it again. Fix it. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-23Switch pmgrp_t to dynamic allocation, general group cleanupDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>