summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-10-12Introduce alpm_time_t typeDan McGee
This will always be a 64-bit signed integer rather than the variable length time_t type. Dates beyond 2038 should be fully supported in the library; the frontend still lags behind because 32-bit platforms provide no localtime64() or equivalent function to convert from an epoch value to a broken down time structure. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Make error message smarter in register_syncs()Lukas Fleischer
Our error message used to be very unclear when the configuration file could not be found: $ ./pactree -lsr gtk error: failed to register sync DBs Instead, display an accurate message and include the file name: $ ./pactree -lsr gtk error: config file /usr/local/etc/pacman.conf could not be read Also, move the error message inside register_syncs() to allow for differentiating between different errors that might require a handler in the future. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Add "--config" optionLukas Fleischer
This allows for specifying an alternate configuration file path, similar to pacman's "--config" option. Given that there is currently no other way to tell pactree to read from another configuration file (except for patching or symlinking), this seems totally sensible - even if there are plans to refactor and/or replace the standalone configuration file parser. We do not define a short option for the sake of consistency with pacman's set of command line options. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translation message catalogs in prep for 4.0 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Remove redundant transaction size outputAllan McRae
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is redundant as the difference of the first two is the last. Instead, only print "Installed Size" and "Net Upgrade Size" when both the installed and removed are non-zero. This results in the following output in the following cases: - package installation only: Installed Size - package removal only: Removed Size - package installation involving replacement: Installed + Net Upgrade Size - package upgrade: Installed + Net Upgrade Size - combination upgrade and installation: Installed + Net Upgrade Size Download Size remains outputted whenever something is downloaded. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-29Remove redundant "removal" output in pure remove operationAllan McRae
Printing "[removal]" beside all package names is redundant when all packages are being removed (i.e. when using -R). Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-28Refactor display_targets to not be recursiveDan McGee
This also fixes a memory leak and makes the dual-purpose "rows" variable go away in favor of storing the rows and non-verbose names separately. This also fixes some potential memory leaks and/or wrong behavior due to the config->verbosepkglists flag being flipped, which we should never be doing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28verbose package lists: remove errant debuggerDan McGee
Left this in as part of the last set of commits, whoops. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Always show download size if -w/--downloadonly was providedDan McGee
The prompt can be rather confusing otherwise when all files have already been downloaded, but there is not a single total size listed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Table format creation code cleanupDan McGee
Better scoping of variables for the most part, and ensure we are using string_length() and not strlen() as appropriate. Also refactor the longest cell code to call string_length() a lot less; by simply using an array of max sizes we don't have to recompute values nearly as much. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Use unsigned types for indent width and column countDan McGee
For getcols(), the functions we call return a value of type 'unsigned short', so it makes sense for us to do the same. string_length() is meant to behave like strlen(), so it should return type size_t. This exposes other functions such as indentprint() which should also be using signed return types. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Show download sizes when using -S/--syncDan McGee
We now label the old 'Size' column as 'Net Change' to reflect the reality of what we are looking at. Sync operations now get an additional 'Download Size' column. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Keep track of explicitly added and removed packagesDan McGee
This allows us to sort the output list by showing all pulled dependencies first, followed by the explicitly specified targets. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Combine add and removal package list displayDan McGee
There was no real reason for these to be done separately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26Avoid comparison between signed and unsigned typesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-26Revamp pacman signal handlerDan McGee
* All errors now go to stderr, so do the same here and simplify the writing of the error message. * Add SIGHUP to the handled signal list, and don't repeat code. * Attempt to release the transaction (e.g. remove the lock file) for all of HUP, INT, and TERM. Signals HUP and INT respects transaction state, TERM will immediately terminate the process. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add status and check for key being disabledDan McGee
Because we aren't using gpgv and a dedicated keyring that is known to be all safe, we should honor this flag being set on a given key in the keyring to know to not honor it. This prevents a key from being reimported that a user does not want to be used- instead of deleting, one should mark it as disabled. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add new import key question enum value and stub frontend functionDan McGee
This is for eventual use by the PGP key import code. Breaking this into a separate commit now makes the following patches a bit easier to understand. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Fix signature printing in package infoDan McGee
pm_asprintf() does not return a length as asprintf() does. Fail. Make sure it is not -1 as that is the only failure condition. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: add note if libcurl disabled and no XferCommandDan McGee
Just a helpful warning for those users in this unenviable position. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: include file and line number in more errorsDan McGee
Before: $ pacman -Si pacman error: invalid value for 'SigLevel' : 'FooValue' After: $ ./src/pacman/pacman -Si pacman error: config file /etc/pacman.conf, line 88: invalid value for 'SigLevel' : 'FooValue' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Pull option names out of messages in config parsingDan McGee
This allows some message reuse, as well as making it clear to translators what *not* to translate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Check capabilities in SigLevel option parsingDan McGee
Only allow turning it on if the backend library has support for it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Move default siglevel value from backend to frontendDan McGee
This takes the libraries hidden default out of the equation: hidden in the sense that we can't even find out what it is until we create a handle. This is a chicken-and-egg problem where we have probably already parsed the config, so it is hard to get the bitmask value right. Move it to the frontend so the caller can do whatever the heck they want. This also exposes a shortcoming where the frontend doesn't know if the library even supports signatures, so we should probably add a alpm_capabilities() method which exposes things like HAS_DOWNLOADER, HAS_SIGNATURES, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Fix int/size_t type in alpm_list_count() callDan McGee
alpm_list_count() returns size_t, which we should use to store the result since it is easy enough to format for printing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Split package validation and load loopsDan McGee
This adds a some new callback event and progress codes for package loading, which was formerly bundled in with package validation before. The main sync.c loop where loading occurred is now two loops running sequentially. The behavior should not change with this patch outside of progress and event display; more changes will come in following patches. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman/upgrade: print 'loading packages...' only onceDave Reisner
Do this outside the loop to prevent the message from being displayed (and pluralized!) for each individual package. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman: use dynamic string allocation where it makes senseDan McGee
None of these are hot-code paths, and at least the target reading has little need for an arbitrary length limitation (however crazy it might be to have longer arguments). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20utils/cleanupdelta: remove unneeded syncdbpathDan McGee
This variable was totally unused. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Flip getcwd()/chdir() for open()/fchdir() in the frontendDan McGee
Just like we did in libalpm in commit 288a81d8470b1. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18src/util: provide strndup definitions where neededDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18pactree: include missing ctype.h headerDave Reisner
needed for isspace() -- avoids warnings on OSX. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14pacman: add short opt '-p' for --print to -{S,R}hDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14Don't duplicate header stringsDan McGee
There is no need to print them into buffers; we can use the values returned by gettext() directly without issue. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11download callback: show decimal places in rate if we have roomDan McGee
Display now looks like this, whereas before we would have just showed '2M/s' for the extra repository download. The cutoff is placed at 100.0 to ensure we only use 4 character slots of width (e.g. '99.9', '100'). :: Synchronizing package databases... testing 39.9 KiB 470K/s 00:00 [######################] 100% core 51.4 KiB 469K/s 00:00 [######################] 100% extra 768.8 KiB 2.1M/s 00:00 [######################] 100% community-testing 1941.0 B 54.4M/s 00:00 [######################] 100% multilib 26.6 KiB 458K/s 00:00 [######################] 100% community 449.8 KiB 1649K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11Move download callback static vars into functionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08Print 'loading packages' message on -U operationsDan McGee
This will be the first thing printed when doing an upgrade. Currently there is no output at all until we start resolving dependencies, which can be a while in if specifying very large targets on the command line, in which case it is nice to let the user know we are doing something. Addresses FS#25822 in the most KISS way possible. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07query check: use provided filelist count instead of keeping trackDan McGee
We don't need to keep track of how many files are in a package now that said value is provided to us. It also makes more sense to use size_t here for types rather than the (hopefully never too short) int. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07Remove unnecessary castDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-06sync: add missing newline in warning messageDave Reisner
Dan: fix the other missing one too. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Add -p/--print tip for -Q operations on filepathDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Former transaction callback rename refactorDan McGee
Put all the callback stuff in alpm.h in one spot, and make the following renames for clarity with the new structure: ALPM_TRANS_EVT_* --> ALPM_EVENT_* ALPM_TRANS_CONV_* --> ALPM_QUESTION_* ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_* alpm_option_get_convcb() --> alpm_option_get_questioncb() alpm_option_set_convcb() --> alpm_option_set_questioncb() Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Move all callbacks up to the handle levelDan McGee
This was just disgusting before, unnecessary to limit these to only usage in a transaction. Still a lot of more room for cleanup but we'll start by attaching them to the handle rather than the transaction we may or may not even want to use these callbacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Be fully silent on any -Sp operationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01pacman/callback: reuse strlen calculationDave Reisner
Call strlen earlier in the dl progress callback, and reuse this length to replace some heavier str*() calls with more optimized mem*() replacements. This also gets rid of a false assumption that the ending string will ever be longer than the original string. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>