summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-03-24Add -T, --deptest to usage messageRay Kohler
Fixes FS #23369 Signed-off-by: Ray Kohler <ataraxia937@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-21Do not query group selection when using -SpAllan McRae
Remove unnecessary output when using -Sp. Fixes FS#23340. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-21Restore --debug/--verbose output without a primary operationDan McGee
This is by no means a guarantee of this behavior remaining the same in the future, but it is easy enough to do what we used to in this case by delaying any sort of error condition until after we are completely done parsing options. Addresses FS#23370. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Remove unnecessary NULL checkDan McGee
fp can never be NULL at this point in the code, proven by Coccinelle. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Fix handling of ignored packagesPang Yan Han
Noted in FS#23342. When the user attempts to install an ignored package and answers no when asked whether to install it, pacman bails out with: "error: target not found: packagename" This is because satisfiers are not found for the package and execution continues to process_group(), where the package is treated as a group (which does not exist). In addition, test ignore006.py is updated with PACMAN_RETCODE=0 since saying no to installing an ignored package should not be considered an error. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-16Warn but don't error for unknown pacman.conf directivesDan McGee
This makes all the pacman developers' jobs harder as we have to switch files whenever running multiple pacman versions and are using newly introduced options. Instead of erroring out, print warnings and continue on. This patch also fixes a const-correctness issue. We immediately cast a 'const char *' to a 'char *' in setrepeatingoption(), which is just plain wrong as we manipulate the underlying string. Fix the types and remove the now unnecessary variable. Finally, a few messages change here for consistency and clarity and because we continue parsing rather than bailing out on a problem. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-16Only read from stdin if '-' is provided as a targetDave Reisner
This prevents a regression for people who enjoy piping yes to pacman to avoid prompts. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-07Fix value of ngettext() count parameter in callbackDan McGee
I was awesome and ran alpm_list_count() on an empty list. Fail. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Fix some easy to find double translationsDan McGee
A lot of these were places that should have used the same message but didn't, or were very easy to convert to using the same message and letting some of the burden off of the translators. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28--print-format displays size in bytesJakob Gruber
Printing the exact size seems to make more sense for scripting contexts. Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> [Dan: adjust for master before VerbosePkgLists patches, fix type] Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Check local DB version before continuing transactionDan McGee
Ensure we have a local DB version that is up to par with what we expect before we go down any road that might modify it. This should prevent stupid mistakes with the 3.5.X upgrade and people not running pacman-db-upgrade after the transaction as they will need to. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25Add directory name to ownership error messageDan McGee
If you were doing a -Qo via xargs, it is at least nice to see what input caused the error message to occur rather than having a bunch of plain messages. This matches the style when we can't find the owner of a file. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-25alpm: alpm_db_get_pkgcache_list => alpm_db_get_pkgcacheDave Reisner
This avoids needless breakage of the public API. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-24Mark log callback format string constDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Merge remote-tracking branch 'allan/hash'Dan McGee
2011-02-04Add more error checking and loggingDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Read pkgcache into hashAllan McRae
Read the package information for sync/local databases into a pmpkghash_t structure. Provide a alpm_db_get_pkgcache_list() method that returns the list from the hash object. Most usages of alpm_db_get_pkgcache are converted to this at this stage for ease of implementation. Review whether these are better accessing the hash table directly at a later stage. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-01-31make -d less strict; add -dd optionFlorian Pritz
-d skips checking the version of a dependency. -dd skips the whole dependency check. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Florian Pritz <bluewind@server-speed.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Allow both cleanmethod values to be specified at the same timeDan McGee
No reason to disallow this- it allows keeping even more packages around in the cache. Test cases included for this case and to ensure the default behavior is preserved. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-31Style cleanups in clean cache codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29Call count() once in callbackDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29select_display: per-database outputXavier Chantry
This function is used both for provision and group selection. Now the database name will be displayed. $ pacman -S base-devel :: There are 11 members in group base-devel: :: Repository testing 1) make :: Repository core 2) autoconf 3) automake 4) bison 5) fakeroot 6) flex 7) gcc 8) libtool 9) m4 10) patch 11) pkg-config Which ones do you want to install? Enter a number (default=all): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman: improve select-questionXavier Chantry
Make use of parseindex like in multiselect, and loop until we get a valid answer like in multiselect. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/sync: implement interactive group selectionXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/remove: switch to new alpm_remove_pkg interfaceXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/upgrade: switch to new interfaceXavier Chantry
Note that there is a behavior change here : if the same package name appeared several times in the target list, the alpm_add_target interface chooses the new package, while alpm_add_pkg returns PKG_DUP. I don't see why we cannot unify the behavior of -S and -U, and just choose one behavior that applies to both. Otherwise, it's always possible to handle these different behaviors in the frontend, it just requires more work. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/sync: rewrite target handlingXavier Chantry
This uses the new public functions to handle targets from the frontend, like it used to be : 1) alpm_find_dbs_satisfier to find (optionally versioned) package or provision 2) alpm_find_grp_pkgs to find members for a groups 3) alpm_add_pkg to finally add the pmpkg_t from 1 or 2 Of course, this adds more code to the frontend, but it completely deprecates sync_target and sync_dbtarget interfaces. This all-in-one interfaces felt wrong and left no control to the frontend. A good frontend should just use alpm_add_pkg, with pkg coming from alpm_db_get_pkg (for normal targets), alpm_find_dbs_satisfier (for versioned provisions) or alpm_find_grp_pkgs (for groups). This also opens the way to provide a better group handling in pacman without constraint from libalpm and callbacks. In ignore006, only the retcode changes, because no package was found to satisfy the target (the only possible package is ignored). Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Add interactive provider selectionXavier Chantry
If there are multiple providers in one db, pacman used to just stop at the first one (both during dependency resolution or for pacman -S 'provision' which uses the same code). This adds a new conversation callback so that the user can choose which provider to install. By default (user press enter or --noconfirm), the first provider is still chosen, so for example the behavior of sync402 and 403 is preserved. But at least the user now has the possibility to make the right choice in a manual run. If one of the provider is already installed, it is picked for reinstall/upgrade, so that provision 002/003 pactest now pass. $ pacman -S community/smtp-server :: There are 3 providers available for smtp-server: 1) courier-mta 2) esmtp 3) exim Which one do you want to install? Enter a number (default=1): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Remove need to explicitly register the local DBDan McGee
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Query fileowner performance improvementsDan McGee
Clean up some of the code by doing less string copying and printing. This is accomplished by either doing it after we know we need it, or taking advantage of the fact that some strings never change such as the root directory prefix. Also, fix an issue where a file at the root level (e.g. /foobar) could not be queried. End result is a much faster user experience when combined with the mbasename() changes. These timings are for looking up 113 files in /etc/, some of which are owned and some which are not. $ find /etc -maxdepth 1 -type f | xargs time pacman -Qo >/dev/null 6.10user 0.05system 0:06.17elapsed 99%CPU (0avgtext+0avgdata 131040maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps $ find /etc -maxdepth 1 -type f | xargs time ./src/pacman/.libs/lt-pacman -Qo >/dev/null 0.86user 0.04system 0:00.92elapsed 99%CPU (0avgtext+0avgdata 131120maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps I'll take a 600% increase in speed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Improve mbasename performanceDan McGee
Rather than roll our own, use strrchr() instead, which glibc may have a better implementation than the simple iteration method we were using. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Be smarter about failure to read backup file contentsDan McGee
Instead of always printing MISSING, we can switch on the errno value set by access() and print a more useful string. In this case, handle files we can't read by printing UNREADABLE, print MISSING on ENOENT, and print UNKNOWN for anything else. Fixes FS#22546. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Mark backup status strings as untranslatedDan McGee
And also change "Not Modified" -> "UNMODIFIED" for consistency. This makes it a lot easier to machine-parse this and not worry about locale differences. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Refactor backup file status check into separate functionDan McGee
This will make it a lot easier to use this stuff elsewhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'epoch-work'Dan McGee
2011-01-22Makefile: Use git describe --dirty for GIT VERSIONXavier Chantry
dirty indicates if the repo has uncommited changes or not when building, so dont hardcode this info. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Allow version comparison to contain epoch specifierDan McGee
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also borrow some of their parsing code for our purposes (thanks!). Add some new tests to our vercmp shell script tester for epoch comparisons, and then make the code work with these newfangled epoch specifiers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-12Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/be_files.c
2011-01-11Make debug config messages consistent in capitalizationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Add a progressbar for package integrity checkingDan McGee
This can take a while too, and it is really easy to add the necessary callback stuff for adding a progressbar. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-11Small fix to download size lookup and a loggerDan McGee
These were just two small things I came across today and found could be fixed or helpful, so I've added them and I'm not sure what else to bundle them with. commit_count++ Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Use double rather than float everywhereDan McGee
No real need to use the smaller floating point types here. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Progress callback cleanups and fixesDan McGee
* Remove a stale comment * Fix a logic error- the conditional disagreed with the comments * Remove some unnecessary floating point casts Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Fix some more simple conversion "errors"Dan McGee
None of these warn at the normal "-Wall -Werror" level, but casts do occur that we are fine with. Make them explicit to silence some warnings when using "-Wconversion". Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Use size_t for alpm_list sizesAllan McRae
There is a lot of swtiching between size_t and int for alpm_list sizes in the codebase. Start converting these to all be size_t by adjusting the return type of alpm_list_count and fixing all additional warnings given by -Wconversion that are generated by this change. Dan: a few more small changes to ensure things compile, adjusting some printf format string characters to accommodate the larger size on x86_64. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Update copyright years for 2011Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-05vercmp: always return 0 if we perform a compareDan McGee
And change the wording slightly to indicate we *print* a value, not *return* it. You can't return negative values (they get coerced to 255), so it isn't worth it to try and cram the result into the return code. Acked-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-30Declare all local functions staticAllan McRae
All functions that are limited to the local translation unit are declared static. This exposed that the _pkg_get_deltas declaration in be_local.c was being satified by the function in packages.c which when declared static caused linker failures. Fixes all warnings with -Wmissing-{declarations,prototypes}. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Detect undefined PATH_MAXAllan McRae
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-20testdb: update for new database formatDan McGee
Sync DB's no longer have an extracted directory, so remove the files check for those. Local databases no longer have a 'depends' file, so kill that check as well. Finally, do a little other cleanup and remove the need for PATH_MAX. Signed-off-by: Dan McGee <dan@archlinux.org>