| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should simplify our output a bit when it comes to determining whether
or not we need a newline in our output. A "done" message was almost always
immediately followed by another start message anyway (or some other output),
so it really isn't necessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When a DB is "registered" in libalpm, it goes and tries to create paths and
other BS which is stupid, but a pain in the butt to fix. For now, work
around this terrible behavior by ensuring our paths are always set before we
call any alpm_db_register function.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I made pacman path handling a bit odd with my rootdir changes a while back
in order to increase flexability. However, it had a bit of a drawback in
that dbpath/logfile/etc. would not default to being under the rootdir if
that was the only parameter you specified in the config file or on the
command line. (Note: logfile handling was always broken due to the explicit
logfile line required in config files)
Pacman now works as follows:
if a rootdir is specified but not dbpath or logfile:
attempt to place the logfile and dbpath in their default locations under
root
if an explicit dbpath/logfile is specified:
interpret these as absolute paths, regardless of the rootdir setting
if nothing is specified:
fall back to configured defaults
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
dump_pkg_sync is now a trivial wrapper for dump_pkg_full
Some smaller changes:
* string_display function added to util.c [prints None in case of empty string]
* Filename field added to -Qip
* rename License to Licenses
* 'Compressed Size' used instead of 'Download Size' for -Qip
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix whitespace errors, spacing issues, const modifiers]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should reduce the chances of people thinking pacman hung during the
middle of something.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I didn't understand why realpath was called on every files of every filelist
in query_fileowner :
ppath = resolve_path(path);
It turns out this is needed for the diverted files. For example, cddb_get
installs /usr/lib/perl5/site_perl/5.8.8/CDDB_get.pm which actually ends in
/usr/lib/perl5/site_perl/current/CDDB_get.pm .
And for making pacman -Qo /usr/lib/perl5/site_perl/current/CDDB_get.pm ,
realpath has to be called on both the target, and the file in the filelist.
However, realpath is costly, and calling it on every single file resulted
in a poor -Qo performance. Worst case :
pacman -Qo /lib/libz.so.1 0.35s user 1.51s system 99% cpu 1.864 total
So I did a little optimization to avoid calling realpath as much as
possible: first compare the basename of each file.
Result:
src/pacman/pacman -Qo /lib/libz.so.1 0.24s user 0.05s system 99% cpu 0.298
total
Obviously, the difference will be even bigger at the first run (no fs
cache), though it's quite scary on my system : 1.7s vs 40s previously.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This function can be useful in other places.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
checkdeps and resolvedeps now take both a remove list and an install list as
arguments, allowing dependencies to be calculated correctly.
This broke the sync990 pactest, but this pactest used dependencies and
provides in an unusual way, so it has been changed.
Dan: the sync990 pactest was just plain wrong. It didn't satisfy the
dependencies correctly, so should never have succeeded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: some variable renaming, clarification in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently this only affects -Ss, -Sl, and -Q to output less information (only
package names).
In the future, we can reuse this flag for other things as well.
[Aaron: rewritten as a front-end flag]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
[Dan: squashed commits together]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
The alpm_get_upgrades was exactly the same as find_replacements +
_alpm_sync_sysupgrade, except that it automatically made the eventual
replacements, without asking the user : Replace %s with %s/%s? [Y/n]
The replace question, asked in find_replacements. can now be skipped by
using a NULL trans argument, so that we get the same behavior as with
alpm_get_upgrades.
So alpm_db_get_upgrades() can now be replaced by
alpm_sync_sysupgrade(db_local, syncdbs).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pmdepmissing_t was used for two totally different things :
missing dependencies, and dependency conflicts.
So this patch simply adds a type for dep conflicts,
and convert the code to use it.
This fix the TODO in conflict.c :
/* TODO WTF is a 'depmissing' doing indicating a conflict? */
Additionally, the code in conflict.c now eliminates the duplicated conflicts.
If pkg1 conflicts with pkg2, and pkg2 conflicts with pkg1, only one of them will be stored.
However the conflict handling in sync_prepare (sync.c) is still very asymetrical, and very ugly too.
This should be improved in the future (there is already a pending patch from Nagy that cleans it a lot).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
The names related to conflicts are misleading :
For dependencies conflicts, the type is pmdepmissing,
and the function names contain just "conflict".
For file conflicts, the type is pmconflict,
and some functions contained just "conflict", some others "fileconflict".
So this is the first step for improving the situation.
Original idea/patch from Nagy, but the patch already didn't apply anymore,
so I did it again.
The main difference is that I kept the conflictype, with the following renaming :
pmconflicttype_t -> pmfileconflicttype_t
PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET
PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Suggested by stonecrest on irc :
'I think "uninstalled" would be better, as it implies that the package was once
installed and since removed. Otherwise a user might wonder why there are
non-installed pkgs in cache'
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
We discussed this with stonecrest on IRC :
20:46 stonecrest >> someone brings up a good point.. why aren't repos that aren't in the pacman.conf removed from /var/lib/pacman?
20:46 stonecrest >> i have 118mb and 24 dirs in there, but only 5 repos at present
21:26 stonecrest >> shining: i guess you could prompt the user on deleting every dir in /var/lib/pacman.. since it shouldn't happen that often except for
the first time
21:30 stonecrest >> could be part of pacman -Sc.. what else were you thinking?
I already heard about this before, but it sounded dangerous to me. I didn't even think about a simple prompt.
I also didn't know where this code would fit. And it fits well with -Sc, I borrowed most of the code from sync_cleancache.
Example session :
Cache directory: /var/cache/pacman/pkg/
Do you want to remove non-installed packages from cache? [Y/n] n
Database directory: /var/lib/pacman/
Do you want to remove unused repositories? [Y/n]
Do you want to remove /var/lib/pacman/sync/pacman-git? [Y/n]
Do you want to remove /var/lib/pacman/sync/deltatest? [Y/n]
Database directory cleaned up
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This caused more problems than it solved, especially with -Qlp output
and files that are new to the new package.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The fallback on providers when a target is not found was already made in the backend :
libalpm/sync.c , _alpm_sync_addtarget .
So I removed it from the frontend.
The sync500 pactest proves this fallback still works correctly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Both memleak was an unfreed alpm_db_whatprovides list.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Run the kernel's cleanfile script on all of our source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Because alpm_pkg_get_depends() no longer returns strings as the data, we
need to first convert the returned structures to printable strings before
we can print the list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of using the often-busted REQUIREDBY entries in the pacman database,
compute them each time they are required. This should help many things:
1. Simplify the codebase
2. Prevent future database corruption
3. Ensure when we do use requiredby, it is always correct
4. Shrink the pmpkg_t memory overhead
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes --ignore and --ignoregroup able to accept multiple
packages/groups by separating each with a comma.
For instance: pacman -Su --ignore kernel26,udev,glibc
This was requested in the comments of FS#8054.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
[Dan: split usage line into two lines for clarity]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Too many fields were being shown on -Qip output, and sizes were not always
correct (-Qi and -Qip output on the same package did not agree).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Having 'Total Installed Size' and 'Total Download Size' makes this size
unnecessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Found by Giovanni Scafora <linuxmania@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Found by Giovanni Scafora <linuxmania@gmail.com>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Setting this option will change the download progress to show the amount
downloaded, download rate, ETA, and download percent of the entire
download list rather than per each individual file.
The progress bar is still based on the completion of the current file
regardless if the TotalDownload option is set.
This closes FS#7205.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will be used in the next commit.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This option acts as if IgnorePkg was set on each package in the group.
This closes FS#1592.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will be used in the next commit.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Move them all to a single fallthrough case statement since they all print
"done".
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 47622eef4dd8fd86a0aa0e3ebdb7b33f7c9d6804 introduced localized times
in the metadata by way of storing the UNIX epoch value instead of a hard
coded date string. However, it missed a few things:
* If we weren't in the C/POSIX/en_US locale, the date parsing would fail
as it tried to use the abbreviations of the locale being used. Fix this
by switching the LC_TIME value before we parse a date.
* We used ctime to print the date value, which is always the C locale
string. Instead, use strftime to print a localized date string.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It has always been a bit odd that logfile had to be specified in the config
file, but no other paths did. Add LOGFILE as a preprocessor definition, and
make a call to alpm_option_set_logfile() to set the default location so no
logfile parameter is necessary in pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This way, _alpm_logaction behaves like _alpm_log, and gives more control.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Instead of declaring the extern variable in every *.c file, include it in
the header file that makes sense. This means handle.h for the handle, and
conf.h for the pacman side config object.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I broke scriptlet logging with ad691001e20272b794d2ed574b556f520e3555c0.
Readd more or less what was there before, although it still needs a lot of
work including hopefully rewriting it to a new event subsystem and having
it log to a seperate file.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Because building of pacman.static fails on some platforms, we should make
it optional. It is enabled by default but can be disabled with the use of
the --disable-pacman-static flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
basename() is a rather untrusty function call on a lot of platforms as it
does some weird and different things. To solve this, I added a mbasename
fuction to pacman to take its place, and simply removed its usage in the
utilities (it isn't worth dealing with there).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
To round a value, we don't need floorf- we can just cast to an int.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
%d was used, which worked for Linux and FreeBSD. Not so for Darwin. The
warning was probably spat out when compiling on x68_64 as well, but no
developers use this architecture as their primary one.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
