| Age | Commit message (Collapse) | Author |
|---|
|
The current VCS packaging support is really, really, really bad.
It is best to strip it out completely before rewriting it.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reduces code duplication and also makes --populate a non-interactive function.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
|
|
prepare is run after the source extraction, and is not run with
--noextract option.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This extra newline leaves a gap that looks strange in of itself,
but is highlighted when piping -g output to a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This function is the reverse of human_to_size, and converts integer byte
sizes to human readable SI prefixed values.
A logical extension of this might be to mimic the formatter that pacman
uses and allow a second argument to be passed in which can coerce the
size, rather than reducing until the unit count is below 1024.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Update the documentation accordingly to mention that users can expect
huamn readable sizes to be acceptable.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is a bash wrapper around an awk function that parses human readable
sizes and returns their representative values in bytes, as a string. A
small test harness is added to validate the functionality.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
I have noticed that quite a number of packages fail with "makepkg -R"
when their (make)dependencies are not installed. Adjust makepkg to
check for dependencies when used with -R. This can still be avoided
by using --nodeps/-d.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
directories.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
|
|
This is already being used (despite not working...) in packages
in the Arch Linux repos.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allow makepkg to work correctly when used with find from busybox.
Fix handling of cross directory symlinks.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was missed in the switch to parseopts, and was caught by distcheck.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix the creation of the repo-remove symlink in the scripts/ dir
on building.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rewrite the handling of libdepends. The primary advantage are:
- Moves functionality from write_pkginfo() to find_libdepends().
- The order of the depends array in the PKGBUILD is kept in the package.
- An unneeded libdepends is only a warning and not an error. This allows
putting a libdepend on a library that is dlopened.
- It is now modular so can be extended to library types other than
ELF *.so.
- Finding the list of libraries a package depends only occurs when a
libdepend is specified in the depends array.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is useful for tools that automatically rebuild packages and
thus require to generate a build order. These entries are skipped
by pacman.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently there is no way to access the makedepends for a package
apart from parsing its PKGBUILD. Put these into the .PKGINFO file
with the idea of making them available in the repo dbs so that
automated build tools can readily determine build order.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add CPPFLAGS support in addition to the current CFLAGS and CXXFLAGS.
This keeps compiler flags split up in the same logical way done
everywhere else.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
scripts/pacman-key.sh.in
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
With bash4 as a requirement, we can use mapfile when reading command
output into an array. mapfile has the advantage of using block buffered
I/O rather than line buffered I/O, making it slightly faster for most
jobs.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Test for file content (-s) rather than just existance (-f). This fixes a
bug that manifests itself in the case of an empty -revoked file. A zero
element 'keys' array would be passed to gpg, forcing it to list and,
subsequently, revoke all known keys.
Bug introduced in d1240f67eab6.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
get_pkg_arch checked for the arch variable being overridden in the
package_$1() function when used with a package as a parameter.
However, when there was no override, it did not fall back to the
global value.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Finish the job on master; most of these were applied to maint already.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
|
|
Instead of creating a subshell for each of these checks (of which there
are many), pass in an expected value and make the check_* function do
the comparison for us, returning 0 (match), 1, (mismatch), or 127 (not
found).
For a measureable benefit, I tested this on a fairly simple package,
perl-term-readkey, and counted the number of clone(2) syscalls to try
and isolate those generated by makepkg itself, rather than the user
defined functions. Results as shown below:
336 before
180 after
So, roughly a 50% reduction, which makes sense given that a single
check_option() call could be up to 3 subprocesses in total.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This script is of questionable value, as it ranks mirrors by an
uninteresting attribute: ping. While the script itself is interesting,
people should be encouraged to rank mirrors by more useful measures,
such as actual speed, locality, or up to date-ness.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Also prevent "sudo" and "su" from being translated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This fixes a lot of checks done by makepkg (e.g. to see if a package
is already built and choosing which package to install). Previously,
if a package had both "i686" and "any" versions, the "i686" one
always took precidence regardless of the value of "arch" in the
PKGBUILD for that package. Fixes FS#27204.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use the no-exec mode of $(BASH_SHELL) to check for syntax errors in
shell scripts. Since we use the extglob feature in various places, this
requires that we pass -O extglob to the shell as well, to ensure that
the parser is armed to handle this syntax.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Perform a search for keys that clearly aren't key IDs. This allows
receiving keys by name or email address, but only if the key resolves
unambiguously.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Conflicts:
scripts/repo-add.sh.in
|
|
Loop through arguments passed to verify_sig and treat each as a
signature to be verified against a source file. Output each file as its
checked to avoid ambiguity.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is retired, as the two consumers of this function are now using the
new parseopts instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Avoid letting the error message from parseopts get lost in the usage
output from pacman-key and makepkg (which is already verbose).
|
|
This requires an ugly amount of reworking of how pacman-key handles
options. The change simply to avoid passing keys, files, and directories
as arguments to options, but to leave them as arguments to the overall
program. This is reasonable since pacman-key limits the user to
essentially one operation per invocation (like pacman).
Since we now pass around the positional parameters to the various
operations, we can add some better sanity checking. Each operation is
responsible for testing input and making sure it can operate properly,
otherwise it throws an error and exits.
The doc is updated to reflect this, and uses similar verbiage as pacman,
describing the non-option arguments now passed to pacman-key as targets.
Similar to the doc, --help is reorganized to separate operations and
options and remove argument tokens from operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Make this option additive, so that the following two operations are
equivalent:
makepkg --pkg foo --pkg bar
makepkg --pkg foo,bar
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This will replace our current options parser used in pacman-key,
makepkg, and ideally elsewhere. It follows heuristics closer to that of
GNU getopt long (and thus pacman itself), with the exception that it
does not allow for options with optional arguments. Due to the way this
parser will be used, this sort of functionality will not be needed.
Instead of relying on eval+set, options are normalized into an array,
OPTRET, which callers should expect to be populated after returning from
parseopts. This avoids problems with quotes and spaces in arguments,
assuming that the user quotes properly when passing into the
application.
A new test harness for parseopts is added in test/scripts.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This removes some unnecessary quotes and adds quotes in a few places to
hopefully work correctly if the tempdir has spaces.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
