| Age | Commit message (Collapse) | Author |
|---|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver()
will change the value of pkgver anyway, and there's no point in linting the
old value. update_pkgver() will call check_pkgver() itself to validate the
new value.
However, that "optimization" only holds if we're definitely going to call
update_pkgver() later; and that's way more complicated than
if (( PKGVERFUNC )); then
it's more like:
if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then
Which is to say: If I have a PKGBUILD with pkgver():
* if I run `makepkg -g` I expect it to lint pkgver, but it won't
* if I run `makepkg -R` I expect it to lint pkgver, but it won't
* ...
So let's fix that.
Rather than try to keep a huge list of conditions in sync with the flow of
makepkg.sh.in, let's just drop it. As far as I can tell, the only thing
that skipping lint_pkgver() really enables is letting the PKGBUILD author
write `pkgver=` in the initial version, and letting pkgver() fill it in.
They can just start writing `pkgver=0` for that workflow.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We accept package_foo() in non-split packages, because it's easier to
switch to/from a split package just by removing a pkgname element. But
it makes no sense to have both in one PKGBUILD.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This change was introduced to prevent entries like depends=('foo>').
However, it had the unintended side effect of causing a number of
working PKGBUILDs to fail to build. This happened when a PKGBUILD
defined one variable through calling a "complex" statement within the
PKGBUILD's package function (e.g. a function or evaluating in a
subshell), then used it to define the package metadata variable.
extract_function_variable() cannot execute the package function in order
to retrieve this information, so it performs a simple grep + eval instead
and in the process misses the contextual awareness of running within the
package function.
While not catching these "issues" can result in incorrect SRCINFO, the
resulting packages are fine. Stop aborting on the common case where the
pkgver of a dependency is dynamically set during the package function
until the large number of broken PKGBUILDs are fixed, and the
restrictions of the PKGBUILD format are documented.
"Fixes" FS#58776
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A blank file slipped into libmakepkg in commit 2c94118d.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We fail with an error, but then we also fail with:
==> ERROR: depends is not allowed to be empty.
/usr/share/makepkg/lint_pkgbuild/pkgname.sh: line 39: continue: only meaningful in a `for', `while', or `until' loop
During the refactor to provide enhanced pkgname=pkgver linting, this was
moved out of the ${pkgname[@]} loop to a distinct function, at which
time it should have been modified to return rather than continue.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman accepts these, and there is no good reason to be more restrictive
ourselves; we should follow the example of "depends" here.
Update the documentation to actually state that this is supported.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
micro-optimization: We only care about temporarily enforcing extglob, so
that is the only one we need to explicitly restore.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
depends=(foo=$epoch:$pkgver-$pkgrel)
In commit 91b72cc386ca03241791748da5da2b150c724ace support was added for
linting depends/etc. to ensure they contain only valid dependency
specifiers. However it did not properly take into account the
possibility of dependencies linked to a specific pkgrel or epoch, which
promptly failed to build because "-" and ":" is not allowed in a pkgver.
pkgrel is something supported by pacman and useful for e.g. split packages
which cannot be mismatched even if the pkgver is the same. Fix by
removing an optional suffixed "-$decimal" when checking for a valid
pkgver.
epoch is kind of difficult to do without :D so likewise fix by removing
an optional prefixed "$integer:"
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
depends, provides, conflicts, replaces, and other variables that are
meant to contain package names, are now checked to ensure
1) the name component contains only characters that would equate to
a valid pkgname.
2) the version component contains only characters that would equate
to a valid pkgver.
3) comparison operator is a valid comparison operator (e.g. provides
only allows exact = while optdepends doesn't allow anything)
This also refactors pkgname into a shared utility function, wires up
pkgbase optdepends and provides to use it, and gives pkgver a touchup
to allow referencing where it was called from.
Fixes FS#57833 and a bit of extra.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to detect if pkgver contains whitespace, we need to quote it.
Previously, only the characters up to the first whitespace was checked.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
scripts/libmakepkg/lint_pkgbuild/pkgver.sh.in now raises an error when
pkgver contains forward slashes.
pkgver containing a forward slash results in a package filename
containing a forward slash, which isn't a valid filename.
Signed-off-by: Steef Hegeman <steefhegeman@hotmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We checked for empty array elements, but did not catch empty array. Add
a check for that case as well.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Extract array detection into its own utility function that ensures
extglob is enabled.
Suggested-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Approach the detection of variables of the wrong type using an approach
similar to that used for construction of .SRCINFO files. While doing silly
things in bash could still result in false negatives, this approach should
be very robust to generatinf false positives results.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Set the return value to be local and always explictly returns it.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Negative subscripts to indexed arrays are not supported before 4.2. However,
since substring expansion works on arrays, we can specify an offset of -1 to
be taken relative to one greater than the maximum index of the specified
array (see Parameter Expansion section of the bash man page). This works with
both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman.
Signed-off-by: Aaron Campbell <aaron@monkey.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The return value was being assigned when an error was found in a PKGBUILD's
arch array but it never was returned.
Also remove error message explaining about adding the arch array to a PKGBUILD.
That was added a long time ago when the arch array first became compulsory.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When extracting variables from PKGBUILD (e.g. for .SRCINFO creation) we make
assumptions about whether variables are arrays or not. This adds a check to
the PKGBUILD linter to ensure variables are arrays or not as appropriate.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pkgbase should be subject to the same restrictions as pkgname
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The check that pkgver is non-empty done in check_pkgver should also be
performed after running the pkgver() function. Merge validate_pkgver
into check_pkgver and run check_pkgver after updating pkgver.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
