| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Using c-format on every strings allowed me two found two broken ones.
One was harmless, but the other caused a segfault, as reported in FS#9658.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Currently xgettext apparently attempts to autodetect c format strings (eg a
string with a %s) to decide whether to use c-format flag or not.
If we use --flag=_:1:c-format instead of --flag=_:1:pass-c-format, the
c-format will be applied everywhere.
I couldn't find this documented anywhere though. But the pass prefix is
mentioned here :
http://www.gnu.org/software/gettext/manual/html_node/xgettext-Invocation.html#xgettext-Invocation
"Specifies additional flags for strings occurring as part of the argth
argument of the function word. The possible flags are the possible format
string indicators, such as ‘c-format’, and their negations, such as
‘no-c-format’, possibly prefixed with ‘pass-’."
And c-format is documented there :
http://www.gnu.org/software/gettext/manual/html_node/c_002dformat-Flag.html#c_002dformat-Flag
"This situation happens quite often. The printf function is often called
with strings which do not contain a format specifier. Of course one would
normally use fputs but it does happen. In this case xgettext does not
recognize this as a format string but what happens if the translation
introduces a valid format specifier? The printf function will try to access
one of the parameters but none exists because the original code does not
pass any parameters."
And that's exactly what happened with FS#9658.
So using c-format for every string will prevent this issue from happening
again.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Some corrections from the previous translation.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks a lot! Now we get to fix the breakage this causes in output messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Good job on the group effort guys, thanks for getting this one complete.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Cleaned up by Oleg Finkelshteyn.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Stops the "<pkg> is up to date -- reinstalling" message when using the
download only flag.
Ref: http://archlinux.org/pipermail/pacman-dev/2008-January/010952.html
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This is the first step of fixing FS#9547. This should not break any existing
code that may rely on this function behaving the way it did, and should be
good for inclusion in a maint release.
In addition, update pactest so it fills the FILENAME field in the DB entries
it creates so we can move forward with a real fix to this issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
For our Czech, Polish, and Russian translations, they do not need to be at
the more specific 'lang_COUNTRY' code, but can live at just plain 'lang'.
This follows the pattern of most other translated programs out there as
Roman pointed out on IRC.
ru_RU: 2 (pacman and libalpm)
ru: 128 for him, 131 for me (everything else)
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If the end of the pB list was reached before the end of pA, we failed to
read any remaining files from the pA list. Add an additional loop to ensure
all entries of pA are added to the return list regardless of whether we have
reached the end of pB.
This new loop also eliminates the now-unnecessary check for a null pB, as we
need to ensure we are excluding directories in the resulting output anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#9235.
We already had the following case in extract_single_file :
/* cases 1,2,3: couldn't stat an existing file, skip all backup checks */
But we actually only did a lstat here. And if lstat worked, we did a stat
without checking.
When lstat works and stat fails, it means we have a broken symlink, like in
FS#9235. We can actually treat this case like a non-existing file.
The broken symlink will then be simply overwritten.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
|
|
We are in string freeze for the 3.1.1 release. This commit updates all the
message files to the latest code, and all translation updates should be
based off of these po-files. Please attempt to keep the line number changes
to a minimum- there should be no reason to update these po files with just
new line numbers. That way we can more easily see exactly which translations
were updated.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
[Xav: removed unneeded makepath_internal function, and fixed the permission
value : 1777 -> 01777]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix for FS#9176.
A previous commit (6e8daa553bbd5) already forced all database files to 644.
Now the directories are also forced to 755.
Additionally, repo-add now sets the umask to 022, just like makepkg does, to
fix the problem at its root.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
For example, if the cachedir is a broken symlink or a non writable
directory, pacman fallbacks to /tmp/. Just before doing that, it freed the
handle->cachedirs list twice !
once in _alpm_filecache_setup, and once in alpm_option_set_cachedirs. So the
first one was removed.
Fixes FS#9186.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
In the old code 'alpm_list_diff(_alpm_db_get_pkgcache(db), dblist,
_alpm_pkg_cmp);' was slow.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: In my opinion, computing both dblist and modified in one for loop also makes
the code clearer, besides being more efficient.
Also renamed joined to targets since I also find that clearer.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Moves "checking dependencies..." notification into code block where
dependency checking is performed to stop spurious notification.
Reference: http://archlinux.org/pipermail/pacman-dev/2008-January/010714.html
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Two functions defined in alpm.h were not marked with SYMEXPORT, causing
linking errors if they were used.
In addition, remove the incorrect use of the 'alpm_' prefix from an internal
function and replace it with '_alpm_'.
Fixes FS#9155.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit e28973169d2e5eda8b64ebdda11ece0dc761d978.
This code might fit better in the frontend than in the backend finally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-November/010150.html
I also changed it for fixing FS#8763 :
if there is exactly one provider, pacman will pull it and print a warning.
if there are several providers, pacman will list them and fail. It's up to
the user to pick one. Add sync501 pactest to reflect that.
|
|
It wasn't even implemented correctly, and it really doesn't have a use if
packagers just do their job correctly anyway for a distro. Let's not try to
solve a problem with the wrong solution now.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had an unused date element in the pmpkg_t struct (not builddate or
installdate). Kill it off and fix the one function that was using it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The previous fileconflict check (package vs filesystem) skipped the conflict
when the file on the filesystem was a directory or a symlink to a directory,
no matter what the file in the package was.
Now, the conflict will only be skipped if the file in the package is a
directory (so compatible with a dir or a dir symlink on the filesystem).
So in the case of 8156 (new fileconflict003 pactest for this case), instead
of silently ignoring the extraction of the test symlink, pacman will now
fail because of a file conflict between the test symlink in the pkg2 package
and the test directory on the filesystem.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
By attempting to stat the cachedir when we load the pacman config, pacman
bails out if it is a non-existant directory, even if it will never be
needed. This is unfortunate as it is only used for sync transactions anyway.
Instead, wait until we need it in _alpm_filecache_setup to actually do
anything.
Reported as FS#9096.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Originally noticed in FS#9024, but was fixed in previous changes anyway.
However, it doesn't hurt to still check it.
Also add a pactest from Chantry Xavier for the original problem to ensure
we can't reproduce it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to the proactive backup handling, we don't need to add the moving
file to the skip_add list.
The backup handling will make sure nothing gets overwritten.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010610.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was the case of the bash packaging error where a file was removed from
the package but not the backup array.
I just added a sanity check so that only the files from the backup array
that are also in the filelist are used.
I had to edit upgrade026 pactest slightly : it required the file to be
copied to .pacsave instead of moved. But just moving it should be enough, as
we agreed on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010440.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These used FUNCTION output level and not DEBUG, so I didn't catch them way
back when I removed those gettext calls. Remove them now (which exposed a
nice little memory access error elsewhere in the code). This should have a
slight speedup effect on the code too as we no longer have to make the
gettext call even when these messages aren't printed.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use _alpm_pkg_dup instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Ugh, it was a pain to figure out why the Total Removed Size was showing up
wrong in the output of removed packages, but this was why- we used a stupid
_alpm_pkg_new call instead of just duping the package. Fix this. In the long
run, we really need to figure out better ways to not duplicate all this
package information.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a pactest for the relocation of a config file between two packages
(case of etc/profile moving from bash to filesystem).
While running this pactest, I found out that chk_filedifference didn't work
correctly with an empty list as second argument. So that's fixed now.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010610.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is something pacman can do on its own straight from the archive, and we
will reduce the chance of problems occurring becuase of inproper FILELIST
generation as we have had in the past with special characters in filenames.
Once we remove it from makepkg. we can remove any usage of it from all of
our other tools, including pacman, pactest, and contrib/ utilities.
Note that removing it from pacman uncovered a few other bugs anyway, so this
was probably a good move.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is the bash case when the /etc/profile file was removed by error from
the package, but stayed in the backup array.
Ref:
http://www.archlinux.org/pipermail/arch-dev-public/2007-December/003556.html
Also fixed a little typo in add.c, but it's disabled code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
As I mentioned earlier on the ML :
http://www.archlinux.org/pipermail/pacman-dev/2007-December/010416.html
the first part of commit 843d368ef6 had no effect because of a bug.
So I fixed the bug, but since this would change backup handling behavior,
and possibly require other bigger changes to work right, I decided to just
disable that part temporarily, and left a TODO in the code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
