summaryrefslogtreecommitdiff
path: root/lib/libalpm/util.h
AgeCommit message (Collapse)Author
2011-07-18add _alpm_access() wrapperFlorian Pritz
This is a wrapper function for access() which logs some debug information and eases handling in case of split directory and filename. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-18Handle removal of empty directories properlyDan McGee
This addresses FS#25141. We shouldn't remove every empty directory we come across during the removal process unless it is truly not known to any other package. This will prevent removal of essential directories such as '/var/lock/'. This is accomplished by first checking the empty/non-empty status of a directory, which was previously done implicitly by calling rmdir() and ignoring errors. We do this to avoid the next (new) check in most cases, which is to look at all local packages to see if the to-be-removed directory is present in another packages' filelist. If we do not find it anywhere, then we remove it, else we keep the file around. The pactest has been updated to test more cases, as well as finding a flaw in the original expected to fail case- we need separate DIR and FILE based EXIST rules. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-05lib/rawstr: borrow raw string functions from curlDave Reisner
We'll need these functions to do locale agnostic and case insensitive string comparisons. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-07-02Prefix alpm_loglevel_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-24Make sync DB reading a bit more flexibleDan McGee
We can reorganize things a bit to not require reading a directory-only entry first (or at all). This was noticed while working on some pactest improvements, but should be a good step forward anyway. Also make _alpm_splitname() a bit more generic in where it stores the data it parses. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-20lib/util: call _alpm_log before setting handle->pm_errnoDave Reisner
This is an unfortunate chain of events. RET_ERR and RET_ERR_VOID will eventually call CHECK_HANDLE, which resets the handle's pm_errno member. Dan probably had a reason for doing this, so we merely switch the order of operations in the RET_ERR macros to avoid stomping on our pm_errno. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-14Ensure handle is valid and pm_errno is reset when calling into APIDan McGee
We didn't do due diligence before and ensure prior pm_errno values weren't influencing what happened in further ALPM calls. I observed one case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that flag persisting the entire time we were calling library code. Add a new CHECK_HANDLE() macro that does two things: 1) ensures the handle variable passed to it is non-NULL and 2) clears any existing pm_errno flag set on the handle. This macro can replace many places we used the ASSERT(handle != NULL, ...) pattern before. Several other other places only need a simple 'set to zero' of the pm_errno field. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Switch all logging to use handle directlyDan McGee
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Move pm_errno onto the handleDan McGee
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to alpm_logaction()Dan McGee
This is the first in a series of patches to update the API to remove the implicit global handle variable. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove global handle from util.cDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04Deal with unused function parameters correctlyAllan McRae
This started off removing the "(void)foo" hacks to work around unused function parameters and ended up fixing every warning generated by -Wunused-parameter. Dan: rename to UNUSED. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-29Merge branch 'maint'Dan McGee
2011-03-29alpm/handle.c: ensure handle is not NULL before proceedingRémy Oudompheng
Many alpm_option_get/set_*() functions already check this and set pm_errno to the right value, but not all, so this improves consistency. Signed-off-by: Rémy Oudompheng <remy@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23lib/dload.c: fix compiler warnings generated by -Wfloat-equalDave Reisner
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing floating point values Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Style change: return(x) --> return xDan McGee
This was discussed and more or less agreed upon on the mailing list. A huge checkin, but if we just do it and let people adjust the pain will end soon enough. Rebasing should be relatively straighforward for anyone that sees conflicts; just be sure you use the new return style if possible. The following semantic patch was used to do the change, along with some hand-massaging in order to preserve parenthesis where appropriate: The semantic match that finds this problem is as follows, although some hand-massaging was done in order to keep parenthesis where appropriate: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a; @@ - return(a); + return a; // </smpl> A macros_file was also provided with the following content: Additional steps taken, mainly for ASSERT() macros: $ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c $ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Add missing include for size_tDan McGee
Needed for things like our strndup() substitute function. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Move locking functions to where they are neededDan McGee
We only call these from the transaction init and teardown, so move them to that file, mark them static, and push more of the logic of handle manipulation into these functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-27Fix double close of the lock fileJonathan Conder
According to FOPEN(3), using fclose on an fdopen'd file stream also closes the underlying file descriptor. This happened in _alpm_lckmk (util.c), which meant that when alpm_trans_release closed it again, the log file (which reused the original file descriptor) was closed instead. Signed-off-by: Jonathan Conder <jonno.conder@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Add strndup fallback function to libalpm utilDan McGee
The same fallback we are currently using in the pacman frontend. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Refactor old date parsing into single methodDan McGee
We've managed to duplicate this four times at this point, so make it a method in util.c instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-07Update copyright years for 2011Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-21Overhaul archive fgets functionDan McGee
The old function was written in a time before we relied on it for nearly every operation. Since then, we have switched to the archive backend and now fast parsing is a big deal. The former function made a per-character call to the libarchive archive_read_data() function, which resulted in some 21 million calls in a typical "load all sync dbs" operation. If we instead do some buffering of our own and read the blocks directly, and then find our newlines from there, we can cut out the multiple layers of overhead and go from archive to parsed data much quicker. Both users of the former function are switched over to the new signature, made easier by the macros now in place in the sync backend parsing code. Performance: for a `pacman -Su` (no upgrades available), _alpm_archive_fgets() goes from being 29% of the total time to 12% The time spent on the libarchive function being called dropped from 24% to 6%. This pushes _alpm_pkg_find back to the title of slowest low-level function. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-20Always specify arguement type in function delcarationsAllan McRae
Always declare a function with (void) rather than () when we expect no arguements. Fixes all warnings with -Wstrict-prototypes. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-14Add hash_sdbm functionDan McGee
This is prepping for the addition of a hash field to each package to greatly speed up the string comparisons we frequently do on package name in _alpm_pkg_find. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Move MAX_DELTA_RATIO definitionAllan McRae
This is a delta specific definition so it makes more sense to put it in the delta specific header file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14Move and rename splitnameAllan McRae
The splitname function is a general utility function and so is better suited to util.h. Rename it to _alpm_splitname to indicate it is an internal libalpm function as was the case prior to splitting local and sync db handling. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14Bump copyright dates to 2010Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Rework the alpm_unpack functionsXavier Chantry
Add support to extract a list of entries Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11int typing: s/unsigned short/int/ in libalpmDan McGee
After our recent screwup with size_t and ssize_t in the download code, I found the `-Wsign-conversion` flag to GCC to see if we were doing anything else boneheaded. I didn't find anything quite as bad, but we did have some goofups- most of our public unsigned methods would return -1 on error, which is a bit odd in an unsigned context. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06libalpm/util.c : remove _alpm_strreplaceXavier Chantry
This function is unused since commit 358cc5804a2df873180e6d9ef2420ab3247f8437. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: also kill from util.h] Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-16Run ldconfig inside chroot.Xavier Chantry
This fixes FS#15294. The code to run a command inside a chroot was refactored from the _alpm_runscriptlet function to _alpm_run_chroot. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-07-01Update copyright headers and messagesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24Remove unused strverscmp substituteDan McGee
Our internal vercmp function was the only user of this, and it no longer relies on it. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-19Remove unnecessary NULL check in FREE() macroDan McGee
free() is designed to do nothing if it is passed a NULL pointer, so there is no need to check for it on our end. Change/fix the macro. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06Remove unnecessary header file, move one macro to util.cDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-27Add an archive_fgets() functionDan McGee
This crude function allows reading from an archive on a line-by-line basis similar to the familiar fgets() call on a FILE stream. This is the first step in being able to read DB entries straight from an archive. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-27libalpm: clean up of md5sum functions.Chantry Xavier
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum, and only used once, so not very useful. I removed them. Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated, so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-14Merge branch 'maint'Dan McGee
2008-01-13FS#9183 : force correct permissions on tmp/.Jaroslaw Swierczynski
[Xav: removed unneeded makepath_internal function, and fixed the permission value : 1777 -> 01777] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-11Use dynamic string allocation in package structuresDan McGee
This also affects all structures with static strings, such as depmiss, conflict, etc. This should help a lot with memory usage, and hopefully make things a bit more "idiot proof". Currently our pactest pass/fail rate is identical before and after this patch. This is not to say it is a perfect patch- I have yet to pull valgrind out. However, this should be quite safe to use in all situations from here on out, and we can start plugging the memleaks. Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-10Update GNU GPL boilerplate and copyright datesDan McGee
Update the GPL boilerplate to direct people to the GNU website for a copy of the license, as well as bump all of Judd's copyrights to 2007. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-16War on whitespaceDan McGee
Run the kernel's cleanfile script on all of our source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-16libalpm: simplify sync db lastupdateDan McGee
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string time storage abstraction in favor of just writing the time_t value to the disk. The only drawback is that everyone's sync DBs will have to be updated at least once so that the lastupdate values are stored right. :) Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-06Add STRDUP macro to mirror MALLOC/CALLOCAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-04libalpm: use an lstat wrapper so we never dereference dir symlinksDan McGee
Linux lstat follows POSIX standards and dereferences a symlink pointing to a directory if there is a trailing slash. For purposes of libalpm, we don't want this so make a lstat wrapper that suppresses this behavior. Signed-off-by: Dan McGee <dan@archlinux.org>