summaryrefslogtreecommitdiff
path: root/lib/libalpm/be_local.c
AgeCommit message (Collapse)Author
2012-06-25add line length parameter to _alpm_strip_newlineDave Reisner
If known, callers can pass the line size to this function in order to avoid an strlen call. Otherwise, they simply pass 0 and _alpm_strip_newline will do the call instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-29Convert ALLOC_FAIL macro into a functionDan McGee
This path is rarely (read: never) taken in any normal run of the code, so injecting the fprintf() call everywhere with the macro is a bit overkill. Instead, add a lightweight _alpm_alloc_fail() function that gets called instead. This does have a reasonable effect on the size of the generated code; most places using the macros provided by util.c have their code size reduced. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-29be_local: use the right length value for filename in all casesDan McGee
Increment the strlen() provided value by 1 for the NULL byte so we use the right value in all three places we later reference it. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-24be_local: write all single-valued attributes firstDan McGee
There isn't a whole lot of reason other than code clarity for this, but it makes it a bit more obvious where multivalued attributes start. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Prefix alpm_pkgfrom_t members with ALPM_Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Prefer fputs/fputc over fprintf when writing local databaseDan McGee
Using fputs should be faster as no format string parsing is required. It also prevents silly errors related to unescaped '%' signs, and removes the need to double them up in a lot of places. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Extract a write_deps function from local database writingDan McGee
This reduces a lot of code duplication in the write function, which cleans it up a bit. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Remove unnecessary path check from local databaseDan McGee
This removes a call to _alpm_local_db_pkgpath() as well as an access() call when reading the local database. This appears to be code from 2006 that has stuck around. We don't need it because: 1) We never use this path except to check it via access(); however, we are already in a readdir() loop so it exists, or at least did at the time of the call. 2) The fopen() and other calls will fail on accessing the database files anyway, and we need to check those for errors. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08Add information on how an installed package was validatedAllan McRae
When installing a package, store information on which validation method was used and output this on "pacman -Qi" operations. e.g. Validated By : SHA256 Sum Possible values are Unknown, None, MD5 Sum, SHA256 Sum, Signature. Dan: just a few very minor tweaks. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08Hook new optdepend structures upBenedikt Morbach
No new behaviour introduced, everything should work exactly as before. Dan: refactored to use the single alpm_depend_t structure. Signed-off-by: Benedikt Morbach <benedikt.morbach@googlemail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-20Update copyright yearsAllan McRae
Add 2012 to the copyright range for all libalpm and pacman source files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06ALPM API adjustments for sanity and consistencyDan McGee
This makes several small adjustments to our exposed method names, and in one case, parameters. The justification here is to make methods less odd in their naming convention. If a method takes an alpm_db_t argument, the method should be named 'alpm_db_*', but perhaps more importantly, if it doesn't take a database as the first parameter, it should not. Summary of changes: alpm_db_register_sync -> alpm_register_syncdb alpm_db_unregister_all -> alpm_unregister_all_syncdbs alpm_option_get_localdb -> aplpm_get_localdb alpm_option_get_syncdbs -> aplpm_get_syncdbs alpm_db_readgroup -> alpm_db_get_group alpm_db_set_pkgreason -> alpm_pkg_set_reason All methods keep the same argument list except for alpm_pkg_set_reason; there we drop the 'handle' argument as it can be retrieved from the passed in package object. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Remove rmrf implementation from backendDan McGee
This moves the code for removal of local database entries right into be_local.c, which was the last user of the rmrf() function we had in our utility source file. We can simplify the implementation and make it non-recursive as we know the structure of the local database entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-02pkghash improvements/modificationsDan McGee
This patch changes a variety of small things related to our pkghash implementation with an eye toward performance, especially on native 32-bit systems. * Use `unsigned int` rather than `size_t` for hash sizes. We already return ERANGE for any attempted creation of a hash greater than 1 million elements, so unsigned int is more than large enough for our purposes. Switching to this type allows 32 bit systems to do native math without helper functions from libgcc. * _alpm_pkghash_create() now internally adds extra padding for additional array elements, rather than that being the responsibility of the caller. * #define values are moved into static const values in pkghash.c; a new `stride` value is also extracted (but remains set at 1). * Division and modulus operators are removed from the normal find and add paths if possible. We store the upper limit of the number of elements in the hash so we no longer need to calculate this every element addition. When doing wraparound position calculations, we only apply the modulus operator if the value is greater than the number of buckets. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-21include config.h via MakefilesDave Reisner
Ensures that config.h is always ordered correctly (first) in the includes. Also means that new source files get this for free without having to remember to add it. We opt for -imacros over -include as its more portable, and the added constraint by -imacros doesn't bother us for config.h. This also touches the HACKING file to remove the explicit mention of config.h as part of the includes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Slight local database files reading optimizationDan McGee
Since we know the length of the line, we can use this all the way through and do a cheaper operation than strdup() by just invoking malloc and memcpy directly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Introduce alpm_time_t typeDan McGee
This will always be a 64-bit signed integer rather than the variable length time_t type. Dates beyond 2038 should be fully supported in the library; the frontend still lags behind because 32-bit platforms provide no localtime64() or equivalent function to convert from an epoch value to a broken down time structure. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Use _alpm_local_db_pkgpath in _cache_changelog_openDan McGee
Another place where we were doing the dirty work by hand. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Revamp scriptlet path formation for scriptlets in local databaseDan McGee
Expose the current static get_pkgpath() function internally to the rest of the library as _alpm_local_db_pkgpath(). This allows use of this convenience function in add.c and remove.c when forming the path to the scriptlet location. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-19Reduce path allocation on the stack in local databaseDan McGee
We did a lot of both malloc-ing and stack printing to form some paths in this code. Attempt to unify it all into the one get_pkgpath() method by adding an optional third "filename" parameter, and form the necessary path string all in one go. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18be_local: cope with a desc file without trailing newlineDan McGee
We checked the (fgets == NULL and !feof) case, but never actually bailed out of the loop if we were at the end of the file, causing infinite looping. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18Remove const specifier from changelog_read() void parameterDan McGee
This shouldn't really be declared with const, and causes a compile error when -Wcast-qual is used. Remove the const specifier from the function specification and all implementations. Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp(). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02More package operations cleanupDan McGee
Neither deltas nor filename attributes are ever present in the local database, so we can remove all of the indirection for accessing these attributes. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Clean up handling of size fieldsDan McGee
We currently have csize, isize, and size concepts, and sometimes the difference isn't clear. Ensure the following holds: * size (aka csize): always the compressed size of the package; available for everything except local packages (where it will return 0) * isize: always the installed size of the package; available for all three package types Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Parse > 2GiB file sizes correctlyDan McGee
We were using atol(), which on 32 bit, cannot handle values greater than 2GiB, which is fail. Switch to a strtoull() wrapper function tailored toward parsing off_t values. This allows parsing of very large positive integer values. off_t is a signed type, but in our usages, we never parse or have a need for negative values, so the function will return -1 on error. Before: $ pacman -Si flightgear-data | grep Size Download Size : 2097152.00 K Installed Size : 2097152.00 K After: $ ./src/pacman/pacman -Si flightgear-data | grep Size Download Size : 2312592.52 KiB Installed Size : 5402896.00 KiB Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Database read optimizationsDan McGee
Hard to believe there was still more room to improve on this, but I found an easily correctable oversight tonight. Our databases (both sync and local) contain many blank lines, and we were not moving onto the next line right away in these cases; instead we would proceed through our strcmp() conditional checks as normal. Some local numbers follow to show the effects of this patch: Sync `-Ss foobarbaz`: 71,709 blank lines skipped early ~1,505,889 strcmp() calls avoided (21 per line) ~15% speed improvement (.210 --> .179 sec) Local `-Qs foobarbaz`: 6,823 blank lines skipped early 115,991 strcmp() calls avoided (17 per line) ~6% speed improvement (.080 -> .071 sec) Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Check local database status flag in db_write sanity check blockDan McGee
Do all the checks at once; this also avoids the 'return' call after we have allocated memory for "pkgpath" as well as tweaked the umask. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-19Remove alpm_option_get_* usage from backendDan McGee
These are all available directly on the handle without indirection. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18Remove use of no-op accessor functions in libraryDan McGee
The functions alpm_db_get_name(), alpm_pkg_get_name(), and alpm_pkg_get_version() are not necessary at all, so remove the calling and indirection when used in the backend, which makes things slightly more efficient and reduces code size. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18Enhance and utilize database status flagsDan McGee
* Move is_local standalone field to status enum * Create VALID/INVALID flag pair * Create EXISTS/MISSING flag pair With these additional fields, we can be more intelligent with database loading and messages to the user. We now only warn once if a sync database does not exist and do not continue to try to load it once we have marked it as missing. The reason for the flags existing in pairs is so the unknown case can be represented. There should never be a time when both flags in the same group are true, but if they are both false, it represents the unknown case. Care is taken to always manipulate both flags at the same time. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Parse conflicts/provides/replaces at database load timeDan McGee
We did this with depends way back in commit c244cfecf654d3 in 2007. We can do it with these fields as well. Of note is the inclusion of provides even though only '=' is supported- we'll parse other things, but no guarantees are given as to behavior, which is more or less similar to before since we only looked for the equals sign. Also of note is the non-inclusion of optdepends; this will likely be resolved down the road. The biggest benefactors of this change will be the resolving code that formerly had to parse and reparse several of these fields; it only happens once now at load time. This does lead to the disadvantage that we will now always be parsing this information up front even if we never need it in the split form, but as these are uncommon fields and our parser is quite efficient it shouldn't be a big concern. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Remove checksum access indirectionDan McGee
These items are never present in anything but sync databases, nor do we even try to load them from the local database. Remvoe the indirection meant to allow the caching layer to work since it will never do anything anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15Load and allow access to sha256sumDan McGee
This adds a field in the package struct for this checksum type as well as allowing access via the API to it. The frontend is now able to display any read value. Note that this does not implement any use or verification of the value internally. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08Store a package info level flag if we fail to load dataDan McGee
If we are missing a local database file, we get repeated messages over and over telling us the same thing, rather than being sane and erroring only once. This package adds an INFRQ_ERROR level that is added to the mask if we encounter any errors on a local_db_read() operation, and short circuits future calls if found in the value. This fixes FS#25313. Note that this does not make any behavior changes other than suppressing error messages and repeated code calls to failure cases; we still have more to do in the "local database is hosed" department. Also make a small update to the wrong but unused flags set in be_package; using INFRQ_ALL there was not totally correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-02Don't trim whitespace when reading database entriesDan McGee
We don't write with extra or unknown whitespace, so there is little reason for us to trim it when reading either. This also fixes the hopefully never encountered "paths that start or end with spaces" issue, for which two pactests have been added. The tests also contain other evil characters that we have encountered before and handle just fine, but it doesn't hurt to ensure we don't break such support in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-21Convert package filelists to an array instead of linked listDan McGee
This accomplishes quite a few things with one rather invasive change. 1. Iteration is much more performant, due to a reduction in pointer chasing and linear item access. 2. Data structures are smaller- we no longer have the overhead of the linked list as the file struts are now laid out consecutively in memory. 3. Memory allocation has been massively reworked. Before, we would allocate three different pieces of memory per file item- the list struct, the file struct, and the copied filename. What this resulted in was massive fragmentation of memory when loading filelists since the memory allocator had to leave holes all over the place. The new situation here now removes the need for any list item allocation; allocates the file structs in contiguous memory (and reallocs as necessary), leaving only the strings as individually allocated. Tests using valgrind (massif) show some pretty significant memory reductions on the worst case `pacman -Ql > /dev/null` (366387 files on my machine): Before: Peak heap: 54,416,024 B Useful heap: 36,840,692 B Extra heap: 17,575,332 B After: Peak heap: 38,004,352 B Useful heap: 28,101,347 B Extra heap: 9,903,005 B Several small helper methods have been introduced, including a list to array conversion helper as well as a filelist merge sort that works directly on arrays. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03Move alpm filelists to a struct objectDan McGee
This allows us to capture size and mode data when building filelists from package files. Future patches will take advantage of this newly available information, and frontends can use it as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03be_local: use macros in database loading similar to be_syncDan McGee
This removes some of the repetition in the code for reading and parsing database file lines. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-02Prefix _alpm_errno_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-02Prefix alpm_loglevel_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-30Add an alpm_db_get_valid() public functionDan McGee
This allows one to check if a database is valid or invalid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-30Make local_db_read() private to the local backendDan McGee
There is little need to expose the guts of this function even within the library. Make it static in be_local.c, and clean up a few other things since we know exactly where it is being called from: * Remove unnecessary origin checks in _cache_get_*() methods- if you are calling a cache method your package type will be correct. * Remove sanity checks within local_db_read() itself- packages will always have a name and version if they get this far, and the package object will never be NULL either. The one case calling this from outside the backend was in add.c, where we forced a full load of a package before we duplicated it. Move this concern elsewhere and have pkg_dup() always force a full package load via a new force_load() function on the operations callback struct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmdbinfrq_t to alpm_dbinfrq_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmbackup_t to alpm_backup_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdepend_t to alpm_depend_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdb_t to alpm_db_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkgreason_t to alpm_pkgreason_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>