summaryrefslogtreecommitdiff
path: root/lib/libalpm/be_local.c
AgeCommit message (Collapse)Author
2011-08-08Store a package info level flag if we fail to load dataDan McGee
If we are missing a local database file, we get repeated messages over and over telling us the same thing, rather than being sane and erroring only once. This package adds an INFRQ_ERROR level that is added to the mask if we encounter any errors on a local_db_read() operation, and short circuits future calls if found in the value. This fixes FS#25313. Note that this does not make any behavior changes other than suppressing error messages and repeated code calls to failure cases; we still have more to do in the "local database is hosed" department. Also make a small update to the wrong but unused flags set in be_package; using INFRQ_ALL there was not totally correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-02Don't trim whitespace when reading database entriesDan McGee
We don't write with extra or unknown whitespace, so there is little reason for us to trim it when reading either. This also fixes the hopefully never encountered "paths that start or end with spaces" issue, for which two pactests have been added. The tests also contain other evil characters that we have encountered before and handle just fine, but it doesn't hurt to ensure we don't break such support in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-21Convert package filelists to an array instead of linked listDan McGee
This accomplishes quite a few things with one rather invasive change. 1. Iteration is much more performant, due to a reduction in pointer chasing and linear item access. 2. Data structures are smaller- we no longer have the overhead of the linked list as the file struts are now laid out consecutively in memory. 3. Memory allocation has been massively reworked. Before, we would allocate three different pieces of memory per file item- the list struct, the file struct, and the copied filename. What this resulted in was massive fragmentation of memory when loading filelists since the memory allocator had to leave holes all over the place. The new situation here now removes the need for any list item allocation; allocates the file structs in contiguous memory (and reallocs as necessary), leaving only the strings as individually allocated. Tests using valgrind (massif) show some pretty significant memory reductions on the worst case `pacman -Ql > /dev/null` (366387 files on my machine): Before: Peak heap: 54,416,024 B Useful heap: 36,840,692 B Extra heap: 17,575,332 B After: Peak heap: 38,004,352 B Useful heap: 28,101,347 B Extra heap: 9,903,005 B Several small helper methods have been introduced, including a list to array conversion helper as well as a filelist merge sort that works directly on arrays. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03Merge remote-tracking branch 'allan/ALPM'Dan McGee
Conflicts: lib/libalpm/be_local.c lib/libalpm/be_package.c lib/libalpm/conflict.c lib/libalpm/diskspace.c lib/libalpm/dload.c lib/libalpm/remove.c
2011-07-03Move alpm filelists to a struct objectDan McGee
This allows us to capture size and mode data when building filelists from package files. Future patches will take advantage of this newly available information, and frontends can use it as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-03be_local: use macros in database loading similar to be_syncDan McGee
This removes some of the repetition in the code for reading and parsing database file lines. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-02Prefix _alpm_errno_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-07-02Prefix alpm_loglevel_t members with ALPMAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-30Add an alpm_db_get_valid() public functionDan McGee
This allows one to check if a database is valid or invalid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-30Make local_db_read() private to the local backendDan McGee
There is little need to expose the guts of this function even within the library. Make it static in be_local.c, and clean up a few other things since we know exactly where it is being called from: * Remove unnecessary origin checks in _cache_get_*() methods- if you are calling a cache method your package type will be correct. * Remove sanity checks within local_db_read() itself- packages will always have a name and version if they get this far, and the package object will never be NULL either. The one case calling this from outside the backend was in add.c, where we forced a full load of a package before we duplicated it. Move this concern elsewhere and have pkg_dup() always force a full package load via a new force_load() function on the operations callback struct. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-28Rename pmdbinfrq_t to alpm_dbinfrq_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmbackup_t to alpm_backup_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdepend_t to alpm_depend_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkg_t to alpm_pkg_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmdb_t to alpm_db_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmhandle_t to alpm_handle_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-28Rename pmpkgreason_t to alpm_pkgreason_tAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-24Make sync DB reading a bit more flexibleDan McGee
We can reorganize things a bit to not require reading a directory-only entry first (or at all). This was noticed while working on some pactest improvements, but should be a good step forward anyway. Also make _alpm_splitname() a bit more generic in where it stores the data it parses. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24Add a 'valid' flag to the database objectDan McGee
Start by converting all of our flags to a 'status' bitmask (pkgcache status, grpcache status). Add a new 'valid' flag as well. This will let us keep track if the database itself has been marked valid in whatever fashion. For local databases at the moment we ensure there are no depends files; for sync databases we ensure the PGP signature is valid if required/requested. The loading of the pkgcache is prohibited if the database is invalid. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-24Move database 'version' check to registration timeDan McGee
This is another step toward doing both local database validation (ensuring we don't have depends files) and sync database validation (via signatures if present) when the database is registered. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22Convert backup list to new pmbackup_t typeDan McGee
This allows us to separate the name and hash elements in one place and not scatter different parsing code all over the place, including both the frontend and backend. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-20Documented purpose of be_*.cKerrick Staley
Added a line to the top of each of be_local.c, be_package.c, and be_sync.c indicating their purposes. Signed-off-by: Kerrick Staley <mail@kerrickstaley.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Switch all logging to use handle directlyDan McGee
This is the last user of our global handle object. Once again the diff is large but the functional changes are not. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-13Move pm_errno onto the handleDan McGee
This involves some serious changes and a very messy diff, unfortunately. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Require handle argument to all alpm_option_(get|set)_*() methodsDan McGee
This requires a lot of line changes, but not many functional changes as more often than not our handle variable is already available in some fashion. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-07New signatures for alpm initialize and releaseDan McGee
These new method signatures return and take handle objects to operate on so we can move away from the idea of one global handle in the API. There is also another important change and that deals with the setting of root and dbpaths. These are now done at initialization time instead of using setter methods. This allows the library to operate more safely knowing that paths won't change underneath it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove global handle from some package and db codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Push down extern handle variable to files that need itDan McGee
This will make the patching process less invasive as we start to remove this variable from all source files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Add handle attribute to pmpkg_t structDan McGee
Similar to what we just did for the database; this will make it easy to always know what handle a given package originated from. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Add handle attribute to pmdb_t structDan McGee
This is the first step in a long process to remove our dependence on the global handle variable we currently share in libalpm, with the goal to make things a bit more thread-safe and re-entrant. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-03Remove ALPM_LOG_FUNC macroDan McGee
The usefulness of this is rather limited due to it not being compiled into production builds. When you do choose to see the output, it is often overwhelming and not helpful. The best bet is to use a debugger and/or well-placed fprintf() statements. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-05Merge branch 'maint'Dan McGee
2011-05-05Ensure populate error return codes are consistentDan McGee
It must be -1 to differentiate it from a number of packages loaded count. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-05Logging changes during DB loadDan McGee
The switch from FUNCTION to DEBUG was ill-advised inside the local database load. Instead, add a DEBUG level logger to both local and sync database loads that shows the number of packages processed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-05-04Deal with unused function parameters correctlyAllan McRae
This started off removing the "(void)foo" hacks to work around unused function parameters and ended up fixing every warning generated by -Wunused-parameter. Dan: rename to UNUSED. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Header inclusion cleanupDan McGee
This does touch a lot of things, and hopefully doesn't break things on other platforms, but allows us to also clean up a bunch of crud that no longer needs to be there. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20syntax: if/while statements should have no trailing spaceDan McGee
This is the standard, and we have had a few of these introduced lately that should not be here. Done with: find -name '*.c' | xargs sed -i -e 's#if (#if(#g' find -name '*.c' | xargs sed -i -e 's#while (#while(#g' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20lib: remove dead code in be_local and be_packageDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-04-15Remove indirection on get_name and get_version operationsDan McGee
For a package to be loaded from any of our backends, these two fields are always required upfront. Due to this fact, we don't need them to be backend-specific operations and can just refer to the field directly. Additionally, our static (and thus private) cache package accessors had a NULL check on pkg before returning the relevant field. Eliminate this since they only way they are ever called is via the packages attached callback struct, which would have caused the NULL pointer dereference in the first place. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-05Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/be_sync.c lib/libalpm/db.c src/pacman/util.c
2011-04-04libalpm/be_local.c: unused variable entXavier Chantry
spotted by clang analyzer Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-03-21Merge branch 'maint'Dan McGee
Conflicts due to change in return calling style. Conflicts: src/pacman/pacman.c src/pacman/sync.c
2011-03-20Fix assignment before NULL checkDan McGee
Easy fix, found using null_ref.cocci example Coccinelle script. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-20Style change: return(x) --> return xDan McGee
This was discussed and more or less agreed upon on the mailing list. A huge checkin, but if we just do it and let people adjust the pain will end soon enough. Rebasing should be relatively straighforward for anyone that sees conflicts; just be sure you use the new return style if possible. The following semantic patch was used to do the change, along with some hand-massaging in order to preserve parenthesis where appropriate: The semantic match that finds this problem is as follows, although some hand-massaging was done in order to keep parenthesis where appropriate: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a; @@ - return(a); + return a; // </smpl> A macros_file was also provided with the following content: Additional steps taken, mainly for ASSERT() macros: $ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c $ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-01Ensure d_type is not DT_UNKNOWN before relying on itDan McGee
Fixes FS#23090, a rather serious problem where the user was completely unable to read the local database. Even if entry->d_type is available, the given filesystem providing it may not fill the contents, in which case we should fall back to a stat() as we did before. In this case, the filesystem was XFS but there may be others. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-28Check local DB version before continuing transactionDan McGee
Ensure we have a local DB version that is up to par with what we expect before we go down any road that might modify it. This should prevent stupid mistakes with the 3.5.X upgrade and people not running pacman-db-upgrade after the transaction as they will need to. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-15Fix some database size estimation problemsDan McGee
* Use stat() and not lstat(); we don't care for the size of the symlink if it is one, we want the size of the reference file. * FS#22896, fix local database estimation on platforms that don't abide by the nlink assumption for number of children. * Fix a missing newline on an error message. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-07Handle null pkgcache for local/sync db_populate()Pang Yan Han
In sync_db_populate() and local_db_populate(), a NULL db->pkgcache is not caught, allowing the functions to continue instead of exiting. A later alpm_list_msort() call which uses alpm_list_nth() will thus traverse invalid pointers in a non-existent db->pkgcache->list. pm_errno is set to PM_ERR_MEMORY as _alpm_pkghash_create() will only return NULL when we run out of memory / exceed max hash table size. The local/sync db_populate() functions are also exited. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-06Remove redundant _alpm_strtrim() in be_local.cPang Yan Han
When reading the "desc" file in _alpm_local_db_read(), some strings are trimmed and checked for length > 0 before their use/duplication subsequently. They are then trimmed again when there is no need to. The following code snippet should illustrate it clearly: while(fgets(line, sizeof(line), fp) && strlen(_alpm_strtrim(line))) { char *linedup; STRDUP(linedup, _alpm_strtrim(line), goto error); info->groups = alpm_list_add(info->groups, linedup); } This patch removes the redundant _alpm_strtrim() calls in _alpm_local_db_read() such as the one inside the STRDUP shown above. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-04Read pkgcache into hashAllan McRae
Read the package information for sync/local databases into a pmpkghash_t structure. Provide a alpm_db_get_pkgcache_list() method that returns the list from the hash object. Most usages of alpm_db_get_pkgcache are converted to this at this stage for ease of implementation. Review whether these are better accessing the hash table directly at a later stage. Signed-off-by: Allan McRae <allan@archlinux.org>