summaryrefslogtreecommitdiff
path: root/doc
AgeCommit message (Collapse)Author
2012-01-02Merge branch 'maint'Dan McGee
Conflicts: doc/Makefile.am
2012-01-02Prevent rebuild of man pages when using release tarballsAllan McRae
Commit 43cad9c8 made the building of all docs depend on the Makefile. However, the Makefile is generated after running ./configure so is always newer than any pregenerated docs. This means that people building from released pacman tarballs are forced to rebuild the docs (and thus have asciidoc installed). That defeats the purpose of prebuilding the documentation. Have the documentatin depends on Makefile.am instead as this is probably what was intended. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-28makepkg: Use SKIP in checksum to skip integrity checkAllan McRae
Using the value of "SKIP" in the checksum array will cause that integrity check to be skipped. This makes building packages that rely on user configurable sources less painful. Based-on-patch-by: Dan McGee <dan@archlinux.org> Based-on-patch-by: David Campbell <davekong@archlinux.us> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Use automake verbose helpers in custom make rulesDan McGee
This converts our script generation to use the built-in AM_V_GEN macro, which honors the V= setting passed to make and allows one to see the full command if they truly desire. The AM_V_at macro is also used in place of an explicit @ so verbose-mode compiles show all commands being run. We can also use these two macros in doc generation to quiet it down to the level we expect. Other minor changes: * a pointless test call is removed in test/pacman/tests/ * sed is used instead of dos2unix as we depend on it anyway * consecutive chmod calls are reduced to a single call (e.g., '+x,a-x') Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Merge branch 'maint'Dan McGee
2011-11-30makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-30Miscellaneous post-4.0.1 updatesDan McGee
Some late-arriving translation updates and add the correct dates to the index.txt releases table. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-20makepkg: add support for PACKAGER environment varPhillip Smith
Add support for overriding configuration in /etc/makepkg.conf and ~/.makepkg.conf by setting the environment variable PACKAGER similar to how SRCDEST and PKGDEST behave. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-16Merge branch 'maint'Dan McGee
2011-11-15Update documentation regarding signature extensionsAllan McRae
Commit e7b56f48 allowed makepkg to handle pgp signatures with the .sign extension. Update the man page to reflect this. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13add fnmatch support for HoldPkgDave Reisner
Adds test remove031. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-11-13add support for back end fnmatch'd optionsDave Reisner
This is work originally provided by Sascha Kruse on FS#20360 with only minor adjustments to the implementation. It's been expanded to cover: NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup. Adds tests ignore008, sync139, sync502, and sync503. Also satisfies FS#18988. Original-work-by: Sascha Kruse <knopwob@googlemail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-10-14Merge branch 'maint'Dan McGee
2011-10-14Remove -f short option for --forceDan McGee
This is not something that should be used on a frequent basis, and giving it a short option encourages use without making the drawbacks obvious. For the 1% of situations that require it, the 5 extra keystrokes are a fair price to pay. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc/index.txt: Reformat past releases chartDan McGee
This makes it a three-column deal with releases all the way back to 1.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13doc: update .gitignore, add CSS override for new tables usageDan McGee
* Make all docs depend on Makefile; if we change flags here we want them rebuilt. * Add explicit filenames to .gitignore so we can add our own CSS override file, and add an asciidoc-override.css resource. * Adjust a few asciidoc options when generating HTML. * Remove asciidoc-manpage.css; apparantly this doesn't exist anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Document verifying source file signatures in makepkgAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Fix typo in PKGBUILD man pageAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: treat foo-trusted as an ownertrust export fileDan McGee
This allows it to serve double-duty. In order to allow users to base verification decisions off of both a valid signature and a trusted signature, we need to assign some level of owner trust to the keys we designate as trusted on import. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: refine and clarify import/import-trustdb behaviorDan McGee
* --import now only imports keys from pubkey.gpg and does not import owner trust; if you want to have both simply run the operations in sequence. * --import-trustdb has been simplified; it will overwrite existing values in the trust database as before, but there is no need to export it first as those values are safe if left untouched. * Fix the manpage referring to a non-existent option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Update Doxyfile and fix some documentation errors caught by DoxygenDan McGee
A few parameters were outdated or wrongly named, and a few things were explicitly linked that Doxygen wasn't able to resolve. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: add an additional plain text 'foo-trusted' fileDan McGee
This is similar to the 'foo-revoked' file we had. This will be used to inform the user what keys in the shipped keyring need to be explicitly trusted by the user. A distro such as Arch will likely have 3-4 master keys listed in this trusted file, but an additional 25 developer keys present in the keyring that the user shouldn't have to directly sign. We use this list to prompt the user to sign the keys locally. If the key is already signed locally gpg will print a bit of junk but will continue without pestering the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22pacman-key: remove holdkeys functionalityDan McGee
We're putting the cart ahead of the horse a bit here. Given that our keyring is not one where everything is implicitly trusted (ala gpgv), keeping or deleting a key has no bearing on its trusted status, only whether we can actually verify things signed by said key. If we need to address this down the road, we can find a solution that works for the problem at hand rather than trying to solve it now before signing is even widespread. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14buildsys: remove existing symlinks before installingDave Reisner
This fixes build errors when performing a manual install straight to a filesystem where the files already exist. Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: add --refresh-keys operationDan McGee
This allows new signatures to be pulled, revocations to be found, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: split keyserver to a separate optionDan McGee
This also renames '--receive' to '-recv-keys' to match the wrapped gpg option name, rather than invent a new one, now that the calling convention is the same. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key help and documentation cleanupDan McGee
We were using the mystical [<foobar>] options which is some sort of cross between a <required> argument and an [optional] one. Remove this madness and do some other general cleanup/consistency work in the manpage. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02doc: consistency when referencing other optionsDan McGee
Use '\--option' rather than `--option` everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02pacman-key: document --lsign-keyDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: rework and document holding keys in keyringAllan McRae
The HoldKey option was undocumented and was not suited for pacman.conf. Instead use the file "/etc/pacman.d/gnupg/heldkeys" to contain a list of keys not to be removed from the pacman keyring with the --populate option. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: Improve documentation for --populateAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-29pacman-key: rework importing distro/repo provided keyringsAllan McRae
The current --reload option, apart from being non-clear in its naming, is very limited in that only one keyring can be provided. A distribution may want to provide multiple keyrings for various subsets of its organisation or custom repo providers may also want to provide a keyring. This patch adds a --populate option that reads keyrings from (by default) /usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional foo-revoked file providing a list of revoked key ids. These files are required to be signed (detached) by a key trusted by pacman-key, in practice probably by the key that signed the package providing these files. The --populate flag either updates the pacman keyring using all keyrings in the directory or individual keyrings can be specified. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-23vercmp: ensure 2.0a and 2.0.a do not compare equalDan McGee
We had this interesting set of facts conundrum, according to vercmp return values: 2.0a < 2.0 2.0 < 2.0.a 2.0a == 2.0.a This introduces a code change that ensures '2.0a < 2.0.a' as would be expected by the first two comparisons. Unfortunately this stays us a bit further from upstream RPM code, but those are the breaks (in RPM, the versions involving 'a' do in fact compare the same, but they are both greater than the bare '2.0'). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Fix formatting in pacman-key manpageJakob Gruber
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18doc/PKGBUILD: update regarding versioned package fieldsDan McGee
Add the info that versioned replaces are now supported, as well as beefing up some of the other places touching on versioned fields. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-18Add makepkg -S which is an alias to makepkg --sourceSebastien Luttringer
makepkg --source is a often used go make source package like for AUR. Have a -S shortcut will save the world. Signed-off-by: Sebastien Luttringer <seblu@seblu.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-17Update PKGBUILD manpage about startdir deprecationSebastien Luttringer
Signed-off-by: Sebastien Luttringer <seblu@seblu.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16doc/PKGBUILD: fix Asciidoc formatting issuesDan McGee
We had this gem: ⇐ (less than or equal to) Due to not ensuring we did literal printing of things like this. Fix it and a few other problems noticed scanning through both the HTML and manpage generated files. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16Update authors and contributorsDan McGee
* .mailmap: add mapping for Dave's two email addresses. * AUTHORS: clear out file, tell people to use `git shortlog -s` instead. * doc/footer.txt: "promote" Dave, put Xavier and Nagy in past contributors. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15build-sys: always use $(RM) instead of rm -fDave Reisner
These are equivalent. Use the autoconf macro for consistency. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15dist: preserve symlinks on installationDave Reisner
This applies to the repo-remove man page as well as the script itself. Yes Dan, I ran distcheck afterwards. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Merge branch 'maint'Dan McGee
Conflicts: scripts/repo-add.sh.in
2011-08-11pacman: remove --dbonly shortoptDave Reisner
This is somewhat of a dangerous option with limited use cases. Don't advertise it as an easily accessibly option. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Allow --needed and --recursive on -U operationsDan McGee
Trivial to implement as the same backend machinery is used anyway. Document it and add it to the accepted options. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Add -S --recursive operationDan McGee
This closely matches what we had before for -R --recursive. Basically, when specifying a target (e.g., pacman), we can now recursively pull all dependencies, regardless of version specifiers and whether they are already satisfied in the local database. This could be used to update pacman on a system with an old glibc, for example, as both pacman and glibc would get pulled into the transaction. This is most useful with --needed to prevent needless reinstalls as described in the man page changes. The end goal of this change is to wire it into SyncFirst and have it be the default mode of operation there, but that belongs in a separate changeset. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-093.5.4 release preparationv3.5.4Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-09Document group and providers selectionAllan McRae
The format required for selection of packages within the group selection dialog is not entirely obvious, so provide some documentation. Fixes FS#24134. Signed-off-by: Allan McRae <allan@archlinux.org> (cherry picked from commit 94d22f93096e210cd00d2e9c97c65f77d49ae387)
2011-08-09doc/pacman.conf: make SigLevel overview an unordered listDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-08Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/dload.c lib/libalpm/po/fi.po lib/libalpm/po/libalpm.pot po/de.po po/fi.po src/pacman/po/pacman.pot src/pacman/util.c
2011-08-08doc/PKGBUILD: fix pkgver for -git packagesFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>