summaryrefslogtreecommitdiff
path: root/doc/PKGBUILD.5.txt
AgeCommit message (Collapse)Author
2011-07-27makepkg: allow epoch to be overriddenAllan McRae
We can override pkgver and pkgrel so it is only logical to add epoch to that list Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-14doc/PKGBUILD: clarify scriptlet version argumentsDan McGee
It was a bit unclear that both pkgver and pkgrel were included in the passed version strings; clarify this fact in the manpage. Also include epoch in the mix now that it exists. Also make two other minor consistency touchups to code-print variables in text. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22makepkg: Add UPX compression supportAllan McRae
This patch enables the automatic compression of executable binaries using UPX when the 'upx' options is specified in makepkg.conf or the PKGBUILD. Additional arguments can be passed to UPX by specifying the UPXFLAGS variable. Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14doc/PKGBUILD: misc changesFlorian Pritz
Acked-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Florian Pritz <bluewind@xinu.at>
2011-06-14Merge remote-tracking branch 'florian/sodeps'Dan McGee
2011-06-14doc/PKGBUILD: misc changesFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09doc/PKGBUILD: document libdepsFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at>
2011-01-21Remove epoch as an independent fieldDan McGee
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: add option to clear buildflagsAllan McRae
Add the "buildflags" option, which is useful in its negative form for disabling CFLAGS, CXXFLAGS and LDFLAGS when building a package. This is useful when determining of one of these flags is causing an issue with a package. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: Add check() function for running test suitesAllan McRae
A PKGBUILD can have an option check() function for running test suites between the build() and package() stages. This function is run by default but can be disabled globally in with "!check" in BUILDENV in makepkg.conf. This setting can be controlled on an individual package basis using makepkg's --check and --nocheck flags. Addition dependencies needed for running the test suite can be specified in the checkdepends array and are only checked when running the check() function. Original-work-by: Jeff C <jeff@kcaccess.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Merge branch 'maint'Dan McGee
2010-12-13doc/PKGBUILD: document that functions run in -e modev3.4.2Dan McGee
Caught this noted on the forums, but it is definitely worth a note in the manpage as well. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-13Fix manpage wrap not at 80 charactersDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Update documentation to reflect new epoch package variableDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23PKGBUILD.5: document illegal variable contentsAndres P
Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-05-13doc: fix up description of where example PKGBUILD is locatedDan McGee
As Allan pointed out, this actually ships with pacman (at least with Arch) and not necessarily with ABS or any other package. Also fix the language dealing with the prototype install files. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15makepkg: allow the use of only a package() functionCedric Staniewski
For some packages, generally the 'any' arch ones, a build step is not required and therefore can be skipped. In these cases, a package() function without a build() one is sufficient. As a side effect, this commit makes meta packages without any function at all in the PKGBUILD possible. Fixes FS#15147. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding arch in split packagesAllan McRae
This allows building a mixture of binary and arch=any packages. Fixes FS#15955. The value of CARCH is no longer overridden to "any" in when arch=any is used and the assigning of the "any" arch is delayed to during the packaging stage. Adjustments were required to fix installing and checking for pre-built packages of varing arches. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-20makepkg: allow overriding pkgver and pkgrel in split packagesAllan McRae
Fixing a single package within a split package requires the overriding or pkgrel. In very rare (but existing) cases, it is useful to override pkgver. Partial fix for FS#15955. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11Introduce new PKGBUILD variable `changelog`Cedric Staniewski
Currently, a changelog is added to a package if a specific file with a hardcoded name exists in the PKGBUILD's directory. This approach is not pretty and also inconsistent with the handling of install files, but it works. With the introduction of split PKGBUILDs, however, a drawback in this old behavior has arisen: you only have the possibility to include one specific changelog file in either every package defined in the PKGBUILD or in none. The use of an additional variable, `changelog`, works around this issue and makes it possible to include a changelog in only some of the packages, and besides, each package of the PKGBUILD can have its own changelog file. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-07Merge branch 'maint'Dan McGee
2009-09-07Update doc and vim syntax for arch=anyXavier Chantry
This fixes FS#15870 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06sanity check for optdepends syntaxXavier Chantry
only allow optdepends like: pkgname: description some (real) examples of invalid optdepends: 'tcl, python and/or ruby: to use corresponding binding' 'xorg-fonts-75dpi : X bitmap fonts needed for the interface' 'ruby-htmlentities (AUR): for one provider named Deastore' 'xpdf - for pdf' Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Allan: rebase off de39a1f6 and adjust man page] Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-21Fix typos in PKGBUILD man pageAllan McRae
Original-patch-by: Jason Ribeiro Signed-off-by: Allan McRae <allan@archlinux.org>
2009-05-14makepkg: Document package splittingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2009-04-11Fix asciidoc formatting warnings and issuesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-18Merge branch 'maint'Dan McGee
2009-02-17Rework optdepends documentation for clarityDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-16makepkg: add optional package functionAllan McRae
This patch allows us to split the building and packaging stages of a PKGBUILD and minimize fakeroot usage. This can be done with less code duplication (run_build and run_package look quite similiar) but the run_package function will be where the package splitting logic is implemented in the future. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-01-02Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/dload.c po/it.po scripts/makepkg.sh.in
2009-01-02Fix asciidoc manpage creation.Xavier Chantry
As reported here, man pages could no longer be built : http://archlinux.org/pipermail/pacman-dev/2008-December/007726.html I found the explanation here : http://www.methods.co.nz/asciidoc/source-highlight-filter.html "If you use a2x(1) to generate PDF you need to include the --no-xmllint option to suppress xmllint(1) checking — the programlisting language attribute (required by the dblatex source highlighter) is not part of the DocBook 4 specification (but it is in the newer DocBook 5 specification)." Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-02makepkg: detect incorrect usage of provides arrayAllan McRae
Using > or < in the provides array is wrong so make it cause an error. Fixes FS#12540. Also, use bash substitution rather than spawning new processes where possible in the error checking. Move split package detection to a better position. Signed-off-by: Allan McRae <allan@archlinux.org> [Dan: backport to maint] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-12-07Merge branch 'maint'Dan McGee
2008-12-07Small documentation updates for clarityDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Merge branch 'maint'Dan McGee
2008-08-25makepkg : allow to specify a download filenameXavier Chantry
A source entry can now have the following form, to specify a different filename : "filename::http://path/to/file" Of course, the old syntax is still supported : "http://path/to/file" And as before, in the second case, the filename used is simply "file". This fixes FS#11292, because handling multiple source files with the same name is now possible (just choose a different filename). But it will also allow to deal much more nicely with funny url like this by using a sane filename (and unfortunately, there are quite a few) : http://www.vim.org/scripts/download_script.php?src_id=6992 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Treat info pages like man pagesAllan McRae
As far a package building is concerned, info pages need to be treated in the same fashion as man pages in that they both can be compressed. This separates them from other forms of documentation and so it makes sense to make that distinction within makepkg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19Add information on version comparison to manpagesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19Merge branch 'maint'Dan McGee
2008-06-14Expand PKGBUILD documentationDan McGee
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as general information about the build() function and about custom variables in PKGBUILDs. This addresses FS#10634. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Various updates needed prior to a new releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-16Add zipman makepkg option.Chantry Xavier
All other steps in tidy_install function were already controlled by an option in makepkg.conf, so this patch adds an option for the man page compression step too. This will allow to keep man pages uncompressed, which is required for some special meta man page, like the zshall one (see FS#4580). Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-14Change the versioned provision format.Chantry Xavier
Change the 'provname provver' format to 'provname=provver'. In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So the provision version was actually handled as a different provision... See FS#9171. Dan: Unfortunately we have to change our original specification for versioned provisions with this patch, but it ends up being the simpler and cleaner solution in the long run, and if there is any time to change it the time is now before many packages have been built. Keeping the ' ' based format would have required us to do special parsing in repo-add, as well as being susceptible to users not using quotes in their provides array. Hopefully this will resolve the issues we had with our initial plan. Sorry for the confusion. Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-13Fix cvsmod typo in PKGBUILD man page.Chantry Xavier
Fixes FS#9175. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-10doc: add info about optdependsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-29doc: rename manlink macro to linkmanDan McGee
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case manlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-19Update PKGBUILD manpage to give info on scriptlet argumentsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-19Add PM_DEP_MOD_GT and PM_DEP_MOD_LT to documentationNagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-10Updates to PKGBUILD manpageDan McGee
Make the manpage a little more distro agnostic by referring to ABS in the context of Arch Linux, and saying that prototype files are also available with the pacman source. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20doc: use source highlighter on PKGBUILD guide, update wrong example textDan McGee
Note that if you are building manpages with asciidoc now, you must also have source-highlight installed for it to correctly generate everything. Signed-off-by: Dan McGee <dan@archlinux.org>