| Age | Commit message (Collapse) | Author |
|---|
|
Commit e7b56f48 allowed makepkg to handle pgp signatures with the
.sign extension. Update the man page to reflect this.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allan's original message: Occasionally when the download rate showed
100.0 the output got messed up. This was caused by the rounding of a
number between 99.95 and 100. Adjust the threshold to avoid this
rounding issue.
Dan: make this fix, but also show values between 0 and 9.995 with two
decimal places since we have the room.
Original-fix-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The point of this early compare to NULL byte check was so we could bail
early and skip the strcmp() call. Given we weren't doing the check
right, this never exited early. Fix it to work as intended.
Noticed-by: Pepe Juárez <trulustapa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This seems to fix FS#26652.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Replacing the strdup when after the first NULL check assures that we get
continue with payload->remote_name defined.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Dan: fix mask calculation, add it to the success/fail block instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This takes the place of three previously used constants:
ARCHIVE_DEFAULT_BYTES_PER_BLOCK, BUFFER_SIZE, and CPBUFSIZE.
In libarchive 3.0, the first constant will be no more, so we can ensure
we are forward-compatible by removing our usage of it now. The rest are
unified for consistency.
By default, we will use the value of BUFSIZ provided by <stdio.h>, which
is 8192 on Linux. If that is undefined, a default value is provided.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Doesn't do a whole lot of good to compare against values that are never
set. Fixes bug where -vvv output wasn't grouping packages together
properly.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
There aretwo seperate issues in the same block of file conflict
checking code here:
1) If realpath errored, such as when a symlink was broken, we would call
'continue' rather than simply exit this particular method of
resolution. This was likely just a copy-paste mistake as the previous
resolving steps all use loops where continue makes sense. Refactor
the check so we only proceed if realpath is successful, and continue
with the rest of the checks either way.
2) The real problem this code was trying to solve was canonicalizing
path component (e.g., directory) symlinks. The final component, if
not a directory, should not be handled at all in this loop. Add a
!S_ISLNK() condition to the loop so we only call this for real files.
There are few other small cleanups to the debug messages that I made
while debugging this problem- we don't need to keep printing the file
name, and ensure every block that sets resolved_conflict to true prints
a debug message so we know how it was resolved.
This fixes the expected failures from symlink010.py and symlink011.py,
while still ensuring the fix for fileconflict007.py works.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These should all prevent installation, and yet two of the three tests
currently fail. Not good.
The best way to see what is going on here is to diff the three new tests
side by side- there is only a small difference between the three tests,
and that is in the destination of the symlink in question that should
never be overwritten.
symlink010.py: myprogsuffix -> myprog
symlink011.py: myprogsuffix -> broken
symlink012.py: myprogsuffix -> otherprog
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is some pecular behavior going on here when a package is loaded
that has no files, as is very common in our test suite. When we enter
the realloc/sort code, a package without files will call the following:
files = realloc(NULL, 0);
One would assume this is a no-op, returning a NULL pointer, but that is
not the case and valgrind later reports we are leaking memory. Fix the
whole thing by skipping the reallocation and sort steps if the pointer
is NULL, as we have nothing to do.
Note that the package still gets marked as 'files loaded', becuase
although there were none, we tried and were successful.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Extend the return values of compute_download_size to allow callers to
know that a .part file exists for the package.
This extra value isn't currently used, but it'll be needed later on.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The fix for -Wl,--as-needed in commit b0f9477f assumes that
--as-needed/--no-as-needed is the only option given in a -Wl line.
However, it is perfectly valid to specify multiple flags comma
separated after a single -Wl (e.g. the default LDFLAGS in Arch
Linux makepkg.conf).
Adjust the fix so it detect --as-needed in a more general context
> readelf -d lib/libalpm/.libs/libalpm.so.?.?.? | grep NEEDED | wc -l
Before: 13
After: 5
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Update for libtool-2.4.2 while keeping the fix for --as-needed from
commit b0f9477f.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds a logger to the CURLE_OK case so we can always know the return
code if it was >= 400, and debug log it regardless. Also adjust another
logger to use the cURL error message directly, as well as use fstat()
when we have an open file handle rather than stat().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pkgrel, as with pkgver, simply mustn't contain hyphens.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These can either be replaced with pm_printf() if they are error related,
or in the fprintf(stdout, ...) case a bare printf() will do.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that pm_printf() always prints to stderr, we don't need this second
function that was always used with stderr as the first argument. Thus,
this patch removes the function and makes the following sed replacement:
sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This matches what we now do in our backend callback function- all
debug/info/warning/error/etc. messages should be on stderr. These are
all the messages with a "warning:" or other type prefix, so does not
affect general pacman output.
This should fix the output confusion noted in FS#26555.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The default is supposidely 30 seconds from the gpg manpage, but that
sure wasn't what I was seeing- it was somewhere closer to two minutes of
silence. Add a more reasonable 10 second timeout value which should be
good enough for any keyserver that doesn't totally stink at it's job.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The absolutely terrible part about this is the failure on GPGME's part
to distinguish between "key not found" and "keyserver timeout". Instead,
it returns the same silly GPG_ERR_EOF in both cases (why isn't
GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart.
Spit out a generic enough error message that covers both cases;
unfortunately we can't provide much guidance to the user because we
aren't sure what actually happened.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use the normal error functions here rather than a bare fprintf().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Nothing we do in our traps is necessary this early in the script. This
fixes FS#26196.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to Eduardo Tongson on the mailing list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is in the realm of "probably not going to happen", but if someone
were to translate "disk" to a string longer than 256 characters, we
would have a smashed/corrupted stack due to our unchecked strcpy() call.
Rework the function to always length-check the value we copy into the
hostname buffer, and do it with memcpy rather than the more cumbersome
and unnecessary snprintf.
Finally, move the magic 256 value into a constant and pass it into the
function which is going to get inlined anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes it a three-column deal with releases all the way back to 1.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Make all docs depend on Makefile; if we change flags here we want them
rebuilt.
* Add explicit filenames to .gitignore so we can add our own CSS
override file, and add an asciidoc-override.css resource.
* Adjust a few asciidoc options when generating HTML.
* Remove asciidoc-manpage.css; apparantly this doesn't exist anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should help point users in the right direction if they have not
initialized via pacman-key just yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the default configuration, we can enter the signing code but still
have nothing to do with GPGME- for example, if database signatures are
optional but none are present. Delay initialization of GPGME until we
know there is a signature file present or we were passed base64-encoded
data.
This also makes debugging with valgrind a lot easier as you don't have
to deal with all the GPGME error noise because their code leaks like a
sieve.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This had the unfortunate implementation detail that depended on the
strings having 1 byte == 1 column hold true. As we know, this is not at
all the case once you move past the base ASCII character set.
Reimplement this whole thing so it doesn't depend on format strings at
all. Instead, simply calculate the max column widths, and then when
displaying each row add the correct amount of padding using UTF-8 safe
string length functions.
Before:
名字 旧版本新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
After:
名字 旧版本 新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This screws up gettext and causes the message to display always
untranslated.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In prep for the 4.0.0 release.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Similar to what we did in edd9ed6a, disconnect the relationship with our
stack allocated error buffer from the curl handle. Just as an FTP
connection might have some network chatter on teardown causing the
progress callback to be triggered, we might also hit an error condition
that causes curl to write to our (now out of scope) error buffer.
I'm unable to reproduce FS#26327, but I have a suspicion that this
should fix it.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
