summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-08buildsys: move autotools bloat to build-auxDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: move acinclude.m4 to m4/Dave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: cleanup libtool and autoconf initializationDave Reisner
- Use LT_INIT over AC_PROG_LIBTOOL, as the latter is a deprecated alias for the former. - Remove redundant macros which are called implicitly by LT_INIT. - Remove unneeded AC_PROG_CXX call (we don't use c++ anywhere) - Add AC_CONFIG_MACRO_DIR([m4]) -- not strictly necessary, but added for consistency with autogen.sh and Makefile.am ref: http://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: define warning CFLAGS in separate varDave Reisner
Continue the trend of not touching the environment CFLAGS, ensuring that the user always has the final say. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: use AC_DEFINE for CYGWIN macroDave Reisner
Instead of directly modifying CFLAGS, use config.h for its intended purpose. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: cleanup gpgme compile time checkDave Reisner
- handle gpgme libs and cflags separately rather than appending to CFLAGS and LDFLAGS - be consistent in AC_LINK_IFELSE check for gpgme 1.3.0 (though this is irrelephant since we don't actually run) - be consistent with usage of "have" and "with" variables (this actually ends up reducing SLOC) - when voluntary detection fails, unset GPGME_CFLAGS and GPGME_LIBS - when requested support fails the version check, complain about the min version. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: use pkg-config for libcurl detectionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: use pkg-config for libarchive detectionDave Reisner
This also introduces a versioned dependency of >=2.8.0. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: use pkg-config for openssl detectionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08buildsys: add pkg-config m4 macrosDave Reisner
We'll need these for a small revamp to library detection. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-08makepkg: treat lib{provides,depends} returns as proper arraysDave Reisner
Make these functions more whitespace space by treating newlines as the element delimiter rather than every form of whitespace. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-08makepkg: use proper array addition in libdepsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-08makepkg: add missing newline from libprovides outputDave Reisner
This was a small oversight from 1917c845 which causes makepkg to write provides entries to the .PKGINFO file improperly, e.g. provides = systemdlibsystemdudev=999 Add a newline in the printf format to ensure that these are spaced appropriately. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07repo-remove: remove deltas file if it becomes emptyFlorian Pritz
Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Prefix alpm_pkgfrom_t members with ALPM_Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Return more useful error codes on package open failuresDan McGee
Failure isn't always due to the package file location not existing; permission issues can also play a part on something like a FUSE-based filesystem inaccessible to root. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Check minimum required gpgme versionAllan McRae
We use interfaces first introduced in gpgme-1.3.0 so test we have at least that version. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Make selecting scriptlet shell workAllan McRae
The initial patch to implement this achieved nothing apart from adding a configure option. This patch makes that configure option do what it advertises. Note that specifing any shell apart from /bin/sh causes testsuite failures as /bin/sh is the only shell in the testing environment. Bug-found-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07makepkg: safely change directoriesAllan McRae
In preparation for the removal of the global error trap we need a way to ensure changing directories succeeds. Add a "cd_safe" wrapper that performs the necessary check. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07makepkg: use printf rather than echo to output variableAllan McRae
Also make sure the strings passed to %s in printf are always quoted. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07makepkg: the rhs in string comparisons should be quotedAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07makepkg: devel_check(): cleanup for hg versionMatthew Monaco
Use pushd/popd, quote args, handle some more errors
2012-04-07makepkg: devel_check(): set newpkgver (cleanup)Matthew Monaco
The case structure allows the syntax to focus on what's actually being done here.
2012-04-07makepkg: devel_check(): consolidate common codeMatthew Monaco
2012-04-07makepkg: devel_check(): determine vcsMatthew Monaco
Rather than prioritizing an arbitrary VCS, collect all development directives. If there is more than one, give a warning and abort.
2012-04-07makepkg: remove unused variableMatthew Monaco
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/signing.c lib/libalpm/sync.c
2012-04-07Revert "makepkg: calculate exact total file size"Dan McGee
This reverts commit b264fb9e9ddcc31dc8782390309421965e507383. With our "fix" of sleeping for BTRFS, we can go back to using `du` to calculate total installed size.
2012-04-07pacman: show groups once with -SgPierre
Only displays groups that haven't appeared yet.. Previously 'pacman -Sg' iterated over syncs, printed every group. This change does not affect '-Sgg' which still orders by sync first. To reproduce, on a current Arch Linux with [extra] and [community]: $ pacman -Sg|sort|uniq -c|sort -n [...] 1 xorg-fonts 2 vim-plugins 2 xfce4-goodies Signed-off-by: Pierre <pierre@spotify.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07makepkg.conf: enable curl's cookie engine for httpDave Reisner
Implements FS#28098. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-074.0.3 release NEWS, version bumps, etc.v4.0.3Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Revert "parseopts: normalize options into an array"Dave Reisner
This was really only half a fix for FS#28445, as it still doesn't correctly handle the case of filenames with spaces. In the short term, there is no obvious fix for this. In the long term, I believe the correct decision is to rewrite the options parser to be more in line with GNU getopt_long. This reverts commits: ca4142714137b16feabac09c4cda86b0a75036f8. 969dcddbdf9d5dbd91aa414cdd193f3fb26b644b.
2012-04-07pkgdelta: exit 1 upon errorFlorian Pritz
This has been 0 since 9fa18d9a4b4ce5217842c71d8a45676e3fb9d3f4, but it doesn't makes sense because we are raising an error. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07pacman-key: Actually verify signatures and exit with correct codesPierre Schmitz
We cannot rely on gpg's exit code. Instead we have to check the status-fd to figure out whether a signature is valid or not. In addition to this pacman-key --verify can now be used in scripts as it will return an exit code of 1 if the signature is invalid. Signed-off-by: Pierre Schmitz <pierre@archlinux.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07pkgdelta: use bsdtar -q optionDan McGee
This matches the optimization made to repo-add in commit 8bbaf045b9ce way back in 2009. We don't need to read the whole package file to ensure multiple .PKGINFO entries don't exist, as well-formed packages should have this file first in the archive. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07sync: fix crash on failed downloadsDave Reisner
Dan was right. This should have been FREE(), not free(). Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07parse_options: initialize unused_options as arrayDave Reisner
Since we treat this as an array, we need to initialize it as one. This avoids addition of an empty element to the option string when we set the option array from the calling program, e.g. +/usr/bin/makepkg[2033]: set -- -i --pkg vim -- '' Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-07Updates from TransifexDan McGee
This encompasses a few languages that have had changes since 4.0.2 available on Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-29pacman-key: change to more reliable default keyserverAllan McRae
User reports indicate that the SKS keyservers are more reliable than both the gnupg.net and mit.edu ones. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-29pacman-key: make the -e option work as advertisedAllan McRae
Using -e without arguments failed to export all keys. Using --export worked as expected. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-28Update all translation filesDan McGee
Pull updates from transifex, run update-po on all files, fix a few errors, and push them back to Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-28makepkg: avoid reporting bogus install size on btrfsDave Reisner
delayed allocation hoses us here and causes erroenous install sizes to be reported. Add a short sleep to allow the transaction to be committed to the filesystem and the stat buffers to be updated. This is apparently a "feature", as per to some of the denizens of #btrfs on freenode. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-28signing: cope with gpg2's failure at lifeDave Reisner
For key searches only, gpg2 will fail to lookup any and all keys that are not prefixed with 0x. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-27bash_completion: complete pacman-key options right awayDan McGee
pacman-key requires at least one dashed option, so complete them right away, rather than falling back to default completion. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-27Drop bash 3.2 completion supportDan McGee
This is pretty old at this point, and upstream bash completions project uses compopt heavily. Completions are by no means a make-or-break feature anyway, so this is not critical. This basically reverts commit 6f4f9c1b66ed85 made in 2010. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Change table_display() to be staticDan McGee
It is only used inside util.c. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Reduce calls to getcolsDan McGee
This dramatically improves upon a much older attempt in 2008 in commit ce3d70aa99ab86. We don't need to call it once per line we print unless there is a reasonable expectation of being able to resize the terminal mid-operation; this is really only the case during our callback progress bars. Some before and after numbers of ioctl() calls, gleaned from strace of the following operations (no targets to any of them to maximize the amount of output): pacman -Qii : 37768 -> 2616 (93.1% decrease) pacman -Qs : 2616 -> 4 (99.8%) pacman -Sii : 133036 -> 10926 (91.8%) pacman -Ss : 10926 -> 14 (99.9%) Obviously the search results are astounding; we only call getcols() once in the case of -Qs, and once per repo in the case of -Ss. For -Qii and -Sii we are still calling it once per package, but this is much better than once per line of info output. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Pass a file descriptor to getcols and flush_term_inputDan McGee
This makes these methods a bit more flexible. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-16Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/sync.c
2012-03-16makepkg: quote removed filename as it can have spacesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-28 15:59:13 +0000