summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-01-29pacman/remove: switch to new alpm_remove_pkg interfaceXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/upgrade: switch to new interfaceXavier Chantry
Note that there is a behavior change here : if the same package name appeared several times in the target list, the alpm_add_target interface chooses the new package, while alpm_add_pkg returns PKG_DUP. I don't see why we cannot unify the behavior of -S and -U, and just choose one behavior that applies to both. Otherwise, it's always possible to handle these different behaviors in the frontend, it just requires more work. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29alpm: new alpm_remove_pkg interfaceXavier Chantry
For consistency with alpm_add_pkg. The new recommended interface is alpm_add_pkg / alpm_remove_pkg, all others interfaces are deprecated. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29pacman/sync: rewrite target handlingXavier Chantry
This uses the new public functions to handle targets from the frontend, like it used to be : 1) alpm_find_dbs_satisfier to find (optionally versioned) package or provision 2) alpm_find_grp_pkgs to find members for a groups 3) alpm_add_pkg to finally add the pmpkg_t from 1 or 2 Of course, this adds more code to the frontend, but it completely deprecates sync_target and sync_dbtarget interfaces. This all-in-one interfaces felt wrong and left no control to the frontend. A good frontend should just use alpm_add_pkg, with pkg coming from alpm_db_get_pkg (for normal targets), alpm_find_dbs_satisfier (for versioned provisions) or alpm_find_grp_pkgs (for groups). This also opens the way to provide a better group handling in pacman without constraint from libalpm and callbacks. In ignore006, only the retcode changes, because no package was found to satisfy the target (the only possible package is ignored). Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29alpm: add alpm_find_grp_pkgsXavier Chantry
This group function is meant to help group handling from frontend : it scans all dbs, handling ignored packages and duplicate members (the first repo where a member is found has the priority). Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29alpm: new alpm_add_pkg interfaceXavier Chantry
This new function is meant to deprecate all existing sync/add target functions : int alpm_sync_target(char *target); int alpm_sync_dbtarget(char *db, char *target); int alpm_add_target(char *target); Rather than dropping these 3 interfaces, it might be better to rewrite them using alpm_add_pkg for now. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29alpm/dep: add alpm_find_dbs_satisfierXavier Chantry
This is a public interface for resolvedep. It looks nicer to expose it this way rather than through sync_target. This function can also be helpful for external tools as it should give good results close to how pacman select a package for satisfying a given dep. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Add interactive provider selectionXavier Chantry
If there are multiple providers in one db, pacman used to just stop at the first one (both during dependency resolution or for pacman -S 'provision' which uses the same code). This adds a new conversation callback so that the user can choose which provider to install. By default (user press enter or --noconfirm), the first provider is still chosen, so for example the behavior of sync402 and 403 is preserved. But at least the user now has the possibility to make the right choice in a manual run. If one of the provider is already installed, it is picked for reinstall/upgrade, so that provision 002/003 pactest now pass. $ pacman -S community/smtp-server :: There are 3 providers available for smtp-server: 1) courier-mta 2) esmtp 3) exim Which one do you want to install? Enter a number (default=1): Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2011-01-29Merge branch 'maint'Dan McGee
2011-01-29pactest: pass entire test to rule.check()Dan McGee
We were piecemeal passing fields from the test object in and it was getting out of hand, and future work would have added yet another argument. Instead, just pass the entire test object and entrust the rule to get what it needs. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-29Remove need to explicitly register the local DBDan McGee
Perform the cheap struct and string setup of the local DB at handle initialization time to match the teardown we do when releasing the handle. If the local DB is not needed, all real initialization is done lazily after DB paths and other things have been configured anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-28Ignore known but unused package descfile fieldsDan McGee
We explicitly place 'pkgbase' (and used to place 'force') fields inside PKGINFO files, so ignore them silently instead of printing an error for them. Also make the error message for unknown keys actually contain the key. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-28libalpm: Fix a missing "nicht" (not) in German translation.Thomas Bächler
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-28Enable failure on server error for curl download commandDan McGee
This will make a 404 a silent failure that returns an error code rather than 0 as was previously done, screwing up the logic used by pacman/libalpm to allow moving onto the next server on a failed download. Fixes FS#22630. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-28Fix libtool performance regression with many argumentsDan McGee
Reported and fixed upstream, patching our version for now until a future release fixes it: * http://lists.gnu.org/archive/html/bug-libtool/2011-01/msg00007.html * http://git.savannah.gnu.org/cgit/libtool.git/commit/?id=286e87b1030c353d9cfc89dbb72d59e0391cb693 Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-24Fix memory leak and error code in DB readingDan McGee
We were returning a package error code rather than a DB one, and we would leak the archive memory if the database file didn't exist. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-24pkgsearch: handle non-matching lines gracefullyDan McGee
Before any non-matching line would trigger some perl warnings about undefined variables. If a line doesn't match, just show it to the user unprocessed; this is seen with warning and error messages pacman not so helpfully emits on stdout rather than stderr. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-24Update contrib/ MakefileDan McGee
We didn't have the proper dependencies specified for our scripts after the move to *.in extensions, so a change to a file didn't trigger a rebuild. Also remove old stuff from .gitignore. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Query fileowner performance improvementsDan McGee
Clean up some of the code by doing less string copying and printing. This is accomplished by either doing it after we know we need it, or taking advantage of the fact that some strings never change such as the root directory prefix. Also, fix an issue where a file at the root level (e.g. /foobar) could not be queried. End result is a much faster user experience when combined with the mbasename() changes. These timings are for looking up 113 files in /etc/, some of which are owned and some which are not. $ find /etc -maxdepth 1 -type f | xargs time pacman -Qo >/dev/null 6.10user 0.05system 0:06.17elapsed 99%CPU (0avgtext+0avgdata 131040maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps $ find /etc -maxdepth 1 -type f | xargs time ./src/pacman/.libs/lt-pacman -Qo >/dev/null 0.86user 0.04system 0:00.92elapsed 99%CPU (0avgtext+0avgdata 131120maxresident)k 0inputs+0outputs (0major+9436minor)pagefaults 0swaps I'll take a 600% increase in speed. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Improve mbasename performanceDan McGee
Rather than roll our own, use strrchr() instead, which glibc may have a better implementation than the simple iteration method we were using. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'backup-status'Dan McGee
2011-01-22Add a few new provides testsDan McGee
These deal with already-installed packages and how they should be the preferred provider in cases where provider selection now occurs. A few involve multiple sync repos. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: sort repos by alpha order in config fileDan McGee
The order was non-deterministic before, and just happened to work for sync023.py as it was written. Ensure there is some sort of predictable ordering. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: use new-style python classesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Be smarter about failure to read backup file contentsDan McGee
Instead of always printing MISSING, we can switch on the errno value set by access() and print a more useful string. In this case, handle files we can't read by printing UNREADABLE, print MISSING on ENOENT, and print UNKNOWN for anything else. Fixes FS#22546. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Mark backup status strings as untranslatedDan McGee
And also change "Not Modified" -> "UNMODIFIED" for consistency. This makes it a lot easier to machine-parse this and not worry about locale differences. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Refactor backup file status check into separate functionDan McGee
This will make it a lot easier to use this stuff elsewhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: revamp modified logicDan McGee
Remove all logic dealing with PKG_MODIFIED as this rule no longer exists. This removes a bunch of unnecessary stat and checksum logic that most of the time we were never even using. Also update the file modified checks to mark every file created using mkfile() with an older time so any modified checks will just work without hacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Modify all pactests to not use PKG_MODIFIEDDan McGee
All conditions that this particular rule tested are better served by using a more specific rule, whether that be checking a package version or whether files inside the package have changed or still exist. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmdbDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for utilDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmtestDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmpkgDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmruleDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmenvDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pactestDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22pactest: pylint changes for pmfileDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Compute download size for sync packages onlyDan McGee
Neither packages from files nor packages from the local database will ever have a download size. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'maint'Dan McGee
2011-01-22Update 3.4.3 release datev3.4.3Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'epoch-work'Dan McGee
2011-01-22Makefile: Use git describe --dirty for GIT VERSIONXavier Chantry
dirty indicates if the repo has uncommited changes or not when building, so dont hardcode this info. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22repo-add: only attempt to create deltas when askedAllan McRae
repo-add should only attempt to create the delta file when using the -d option. Also adjust a couple of tests to use the "double bracket" syntax. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22doc: update current list of authorsDan McGee
Allan, I had no idea you were not listed here. I think you count as an active developer at the moment. Also, move Aaron to the past contributors section. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22doc: add a vercmp manpageDan McGee
This includes info on version comparison that is very similar to the stuff in the pacman manpage, but also a few vercmp examples, the return values, and other fun stuff. Also update the version comparison stuff in the pacman manpage. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22makepkg: encode epoch in version specifier if > 0Dan McGee
This makes things consistent with everywhere else we are incorporating the new optional epoch field. Add a helper function that forms the version string for you and use it in makepkg where I found 'pkgver.*-.*pkgrel'. This exposes a few shortcomings in a previous "Override pkgver" patch (2020e629) in the install package and check if built functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Remove epoch as an independent fieldDan McGee
Instead, go the same route we have always taken with version-release in libalpm and treat it all as one piece of information. Makepkg is the only script that knows about epoch as a distinct value; from there on out we will parse out the components as necessary. This makes the code a lot simpler as far as epoch handling goes. The downside here is that we are tossing some compatibility to the wind; packages using force will have to be rebuilt with an incremented epoch to keep their special status. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21Allow version comparison to contain epoch specifierDan McGee
Adapting from RPM, follow the [epoch:]version[-release] syntax. We can also borrow some of their parsing code for our purposes (thanks!). Add some new tests to our vercmp shell script tester for epoch comparisons, and then make the code work with these newfangled epoch specifiers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21pactest: add more testing for epochDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-21pactest: Rename epoch pactestsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>