| Age | Commit message (Collapse) | Author |
|---|
|
Populate $cur and $prev with the new bash-completion 1.2 function,
_get_comp_words_by_ref.
_get_cword and _get_pword have been deprecated.
Signed-off-by: Carlos Diaz <839273@gmail.com>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If defined, it must be an integer.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This adds epoch support to pactest, while still producing packages and
database entries the same way makepkg and repo-add currently do in a
backward compatible fashion (still including the 'force' option).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allow it to be a variable in the PKGBUILD as well as propagating it through
to the built package and the package database. We leave some backward
compatibility in place by placing the '%FORCE%' option in the database if
the package contains an epoch; this will be used by older versions of pacman
and more or less ignored by versions that use epoch.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow for better control of what was previously the 'force' option
in a PKGBUILD and transferred into the built package.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Just a few small things I noticed looking through the code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
We do not write to sync repos so kill the code for that.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Remove unnecessary parsing of fields not found in sync desc file.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Remove unnecessary parsing of fields not found in local desc files.
Leave %FORCE% parsing as this likely will make an appearance in desc
files in the future.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Local packages do not have deltas so remove lazy loading of delta
information.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These functions are only needed by be_local and were only promoted
to db.{h,c} as part of the splitting of handling the local and sync
dbs. Move them into be_local.c and make them static again.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Clean-up the previous download location of the sync database and
any old extracted sync database directories which are unneeded
with the tar-db backend.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
As the sync databases are read directly from the tarball, we no
longer need to extract them.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Read in package information for a tar based sync database. Do not
use lazy loading for sync db.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Read in list of packages for sync db from tar archive.
Breaks reading in _alpm_sync_db_read and a lot of pactests (which
is expected as they do not handle sync db in archives...).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These will be needed for the handling of both local and sync database
caches, so put them in a common location.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Move splitname, checkdbdir, get_pkgpath into db.{h,c} as these will be
needed to parse both the local and sync databases during the initial
splitting. They will be moved out of db.{h,c} at to more appropriate
locations at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It doesn't do a whole lot yet, but these type of operations will
potentially be different for the DBs we load.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Hopefully we've finally arrived at package handling nirvana, or at least
this commit will get us a heck of a lot closer. The former method of getting
the depends list for a package was the following:
1. call alpm_pkg_get_depends()
2. this method would check if the package came from the cache
3. if so, ensure our cache level is correct, otherwise call db_load
4. finally return the depends list
Why did this suck? Because getting the depends list from the package
shouldn't care about whether the package was loaded from a file, from the
'package cache', or some other system which we can't even use because the
damn thing is so complicated. It should just return the depends list.
So what does this commit change? It adds a pointer to a struct of function
pointers to every package for all of these 'package operations' as I've
decided to call them (I know, sounds completely straightforward, right?). So
now when we call an alpm_pkg_get-* function, we don't do any of the cache
logic or anything else there- we let the actual backend handle it by
delegating all work to the method at pkg->ops->get_depends.
Now that be_package has achieved equal status with be_files, we can treat
packages from these completely different load points differently. We know a
package loaded from a zip file will have all of its fields populated, so
we can set up all its accessor functions to be direct accessors. On the
other hand, the packages loaded from the local and sync DBs are not always
fully-loaded, so their accessor functions are routed through the same logic
as before.
Net result? More code. However, this code now make it roughly 52 times
easier to open the door to something like a read-only tar.gz database
backend.
Are you still reading? I'm impressed. Looking at the patch will probably be
clearer than this long-winded explanation.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: rebase and adjust]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Implement this seemingly simple change in package.h:
typedef enum _pmpkgfrom_t {
- PKG_FROM_CACHE = 1,
- PKG_FROM_FILE
+ PKG_FROM_FILE = 1,
+ PKG_FROM_LOCALDB,
+ PKG_FROM_SYNCDB
} pmpkgfrom_t;
which requires flushing out several assumptions from around the codebase
with regards to usage of the PKG_FROM_CACHE value. Make some changes where
required to allow the switch, and now the correct value should be set (via a
crude hack) depending on whether a package was loaded as an entry in a local
db or a sync db.
This patch underwent some big rebasing from Allan and Dan.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Move almost all of the caching related stuff into a single #define
(which should maybe even just be a static function) so we don't
duplicate logic all over the place. This also makes the code a heck of a
lot shorter and means further changes to this stuff don't have to touch
each and every getter function.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add a .gitignore file
* Use the same 'GEN' output we have in the scripts/ Makefile when doing our
edits on the .in files
* Remove PKGBUILD.vim and vimprojects from our edit list, they have no need
to be in the list
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the following, the letters SRUDQ refer to the corresponding pacman
operations.
Most of the work in this commit is about removing as many options as
possible from the global section and moving them to where they actually
belong.
Additionally, --ignore{,group} are added to U and --dbonly is added
to S.
--dbonly added to S
--asdeps moved to S/U/D
--asexplicit moved to S/U/D
--print-format moved to S/U/R
--noprogressbar moved to S/U/R
--noscriptlet moved to S/U/R
--ignorepkg added to U
--ignoregrp added to U
-d moved to S/U/R (--nodeps) and Q (--deps)
-p moved to S/U/R (--print) and Q (--file)
-f moved to S/U
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Split parsing of CLI arguments into separate functions:
parsearg_op (operations)
parsearg_global (global options)
parsearg_{database,query,remove,sync,deptest,upgrade}
Organization strictly follows the manpage (even where the manpage is
incorrect) - these cases will be fixed in the following commits.
Switch cases are copy/pasted and statements unrelated to chosen
operation are deleted.
Parsing logic adjusted as follows:
1) Parse operation
2) If we can bail out early (duplicate op, help/version requested) do so
3) Parse arguments again:
foreach arg:
if arg is operation:
continue
tryparse_args_specific_to_op
if unsuccessful tryparse_args_global
if unsuccessful print error message and exit
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add a bunch of static declarations where possible
* Fix void functions to be proper syntax, e.g. void func(void)
* Consistency fixes (such as argv references)
* Remove dead str_cmp() function from testdb
* Remove unneeded config.h header includes
* vercmp: remove completely unnecessary string copying
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is needed If we want to use sysconfdir,localstatedir and other variables.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- Print an error if database entry was not found and delta entry cannot
be added
- More informative line when delta entry is added (oldfile -> newfile)
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows deltas to be generated at repo-add invocation time as opposed to
just added to the database. It will generate the delta from the package
version currently in the database.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We weren't reading this in from our packages, thus causing us not to write
it out to our local database. Adding this now will help ease the upgrade
path for epoch later and not require reinstallation of all force packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
'mknod <file> p' is apparently GNU-only. Looking at coreutils' source
code, It just calls mkfifo.
This one line patch should fix makepkg logging in non-GNU systems.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pacman should catch cases in which the passed arguments don't apply to the
current operation (sync/query/...).
Also see FS#20950.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
gensync generated a sync.db file with PKGINFO syntax, this is not quite what
pacman expects.
Also the file was only added to the Server path:
root/var/pub/sync/sync.db
but it was not available in the normal sync db path:
root/var/lib/pacman/sync/sync.db
Change gensync() to generate var/lib/pacman/sync/sync.db and then copy it to
var/pub/sync/sync.db (this is used by sync200 -Sy test).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Just like in 24fc623e1a8bf905cf0367f9bd40bc5bd6034378, apply to pmdb
gensync as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We did this check unconditionally, rather than only doing it if we were
actually going to build and run with libfetch. This is safe because we would
have already bailed if libfetch was explicitly requested but not found.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is not a bash builtin, so can potentially cause portability issues.
Additionally, the use of it is completely unnecessary as it can all be done
within bash (and done faster).
$ time pactree xfwm4 >/dev/null (old version)
real 0m3.245s
$ time ./contrib/pactree xfwm4 >/dev/null (new version)
real 0m3.042s
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
On Linux and OS X, we can determine if an entry obtained through a readdir()
call is a directory without also having to stat it. This can save a
significant number of syscalls. The performance increase isn't dramatic, but
it could be on some platforms (e.g. Cygwin) so it shouldn't hurt to use this
unconditionally where supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
