summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-05makepkg: remove STRIP_DIRSAllan McRae
For binary packages, the majority of the time used in the debugs symbol stripping process is the actual stripping of the binaries/libraries and not the testing of which files to strip. This allows more complete stripping of packages that install to "non-standard" paths that would not be generally included in makepkg.conf. Any performance hit that may be apparent for (_large_) "arch=('any')" packages can readily be avoided by disabling stripping in the PKGBUILD options array. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Set pm_errno on libarchive errors while readingSebastian Nowicki
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Merge branch 'maint'Dan McGee
2010-09-27Merge branch 'build-system'Dan McGee
2010-09-27Add FORTIFY_SOURCE supportAllan McRae
Adds a check for the minimum mainline GCC version for FORTIFY_SOURCE support and enables -D_FORTIFY_SOURCE=2 by default when building with --enable-debug. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-27Add wrapper around asprintf callsAllan McRae
Not checking the return value of asprintf calls reuslts in a warning when using -D_FORTIRFY_SOURCE=2. This adds a simple wrapper around asprintf calls which checks the return value. Currently the check does nothing more than outputing a message to stderr on failure, but that is at least an improvement over silent failures. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-27repo-add: make --quiet output more quietAllan McRae
Fixes FS#20403. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-23Update build system (automake, autoconf, libtool)Dan McGee
Unfortunately this patch is hard to split up into smaller chunks. Our build system and the associated automake/autoconf/libtool macros has been left untouched for a while, and could use a refresher. * Upgrade ltmain.sh to the latest version * Move away from a huge acinclude.m4 directory to using individual files in the m4/ subdirectory, suggested by upstream automake documentation * Update all macros to their latest available version * Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update more supplementary build scriptsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update config.guess and config.subDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Clean up root .gitignoreDan McGee
We had a few files listed in here that we have checked in to our repo, which doesn't make a whole lot of sense. Also alphabetize the list while we are at it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-23Update gettext Makefiles to 0.18Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15bacman: unify package creation with makepkgAllan McRae
Currently bacman always compresses with gzip now matter what PKGEXT is set to. Rework the entire package creation process to be similar to that in makepkg. This also make the explicit assumption that PKGEXT is defined in makepkg.conf. Thanks to Nelson Chan <khcha.n.el@gmail.com> for the original patch to fix the incorrect package compression. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15Merge branch 'maint'Dan McGee
2010-09-15Update Portuguese translationGaspar Santos
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15PKGBUILD-example.txt: Remove superfluous "|| return 1".Lukas Fleischer
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-15Update Kazakh translationBaurzhan Muftakhidinov
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-07Remove quotes in remaining bash regexesDan McGee
After a8dcfeccfc, Allan noted that one more regular exprssion inside makepkg also contained quotes; these should not be there for the same reason as that commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-07Restore trimming of db and pkg extensionsDan McGee
These keep having to change because we are getting really good at changing the downloaded filename. Shorten the match sequences to just .db and .pkg and trim everything after and including these strings. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-06Fix libfetch configure checkingDan McGee
I don't know what I tested in commit 3e7b90ff6950, but it definitely wasn't working as advertised. Fix the checks in the source code itself to match the right define (HAVE_LIBFETCH), as well as make sure the configure check defaults to looking for the library but not bailing if it could not be found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Minor translation file updates after `make distcheck`Dan McGee
It touched up these a bit after it ran, so might as well check the changes in so we don't have to deal with them again later. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Retroactive additions to 3.4.1 changesDan McGee
Forgot to mention things involving the translation changes we had. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-03Merge branch 'maint'Dan McGee
2010-09-03libalpm Swedish translation updatev3.4.1Tobias Eriksson
Signed-off by: Tobias Eriksson <tobier@tobier.se> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Clean up libfetch checking in configureDan McGee
Model it after the new OpenSSL check, and have it be a bit more useful. If you do not explicitly pass a command line option, it will be linked if available but will not error out if it is missing. Also bump the version to that where connection caching was introduced as we use these new features in the codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02libalpm md5: use larger and dynamic bufferDan McGee
This gave at least a 10% improvement on a few tested platforms due to the reduced number of read calls from files when computing the md5sum. It really is just a precursor to another patch to come which is to use MD5 functions that do the job a lot better than anything we can do. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02German translation updatesMatthias Gorissen
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Small fixes to Kazakh translationBaurzhan Muftakhidinov
2010-09-01Merge branch 'maint'Dan McGee
2010-09-013.4.1 version bumpDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add new European Portuguese translationGaspar Santos
This is being checked in as 'pt' rather than 'pt_PT' as that is what Transifex seems to want, and it is also the dominant choice of packages already installed on my system when doing a count of the files located in the /usr/share/locale translation directories. Thanks for the new translation! Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Add dir missing from autoclean.shDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Use pipe to create compressed package instead of an intermediate tar fileJürgen Hötzel
A pipe between tar and compression command is used. This improves performance by running tar and the compression command simultaneously. Using a pipe also reduces IO by not writing an intermediate tar file to disk. Signed-off-by: Juergen Hoetzel <juergen@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27use execv to avoid using sh just to run ldconfigJonathan Conder
Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27redirect scriptlet stderr synchronously through alpmJonathan Conder
Fixes FS#18770, and hopefully an occasional deadlock in my frontend as well. For simplicity it redirects all scriptlet output through SCRIPTLET_INFO, and all callbacks in the child process have been replaced for thread-safety. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27Merge branch 'maint'Dan McGee
2010-08-27makepkg: remove trailing quote mark in regexDan McGee
Regular expressions in bash should not be quoted. Glad this was in the documentation and I didn't have to go to #bash to ask... Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-27pactest: add shell to fake root environmentJonathan Conder
Adds a shell to the fake root set up for pactests, which was not needed previously due to a bug (debian #582847) in fakechroot. Signed-off-by: Jonathan Conder <j@skurvy.no-ip.org>
2010-08-25Update Chinese translation甘露(Gan Lu)
Submitted through Transifex on 2010-07-02. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23Merge branch 'maint'Dan McGee
2010-08-23makepkg: error out on empty optdepends entriesAllan McRae
If optdepends was defined with empty members, then makepkg would abort late in the package building process. Detect such cases in the check_sanity() function. Fix-provided-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23makepkg: use less local variables in check_sanityAllan McRae
Instead of declaring a new local variable for each loop in the check_sanity() function, just reuse $i. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: remove unnecessary variable presence checkAllan McRae
It is unnecessary to check for a variables existence before looping over it. Extracted from patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: clarify invalid backup entry errorsAllan McRae
"Invalid backup entry" was not a particular helpful error message, especially when it was due to the file not being in the final package. Clarify these two messages. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23PKGBUILD.5: document illegal variable contentsAndres P
Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: less code duplication in create_packageAndres P
Combine changelog and install file creation in create_package(). Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23makepkg: use regex to match options for privilege escalationAllan McRae
Eases maintanence if we need to add further options in the future. Extracted from a patch supplied by Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-08-23Fix some whitespace issuesAllan McRae
The combination of tabs and spaces is annoying in any editor that does not use a tab width of 2 spaces. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-08-23fgets invocation cleanupDan McGee
From the fgets manpage: fgets() reads in at most one less than size characters from stream and stores them into the buffer pointed to by s. Reading stops after an EOF or a newline. If a newline is read, it is stored into the buffer. A '\0' is stored after the last character in the buffer. This means there is no need at all to do 'size - 1' math. Remove all of that and just use sizeof() for simplicity on the buffer we plan on reading into. Signed-off-by: Dan McGee <dan@archlinux.org>