summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-10-31makepkg: fix bash substitution to work under older versionsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28makepkg: enable passing PKGBUILD from pipeAllan McRae
Do not attemp to update pkgver/pkgrel when reading a SCM based PKGBUILD from a pipe. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28Merge branch 'maint'Dan McGee
2008-10-28testdb : extend the tool to allow checking sync dbs too.Xavier Chantry
Example usage and output : > src/util/testdb -h usage: testdb [-b <pacman db>] : check the local database testdb [-b <pacman db>] core extra ... : check the listed sync databases > src/util/testdb Checking the integrity of the local database in /var/lib/pacman/ > src/util/testdb core extra testing community Checking the integrity of the sync databases in /var/lib/pacman/ missing dependency for archboot : bcm43xx-fwcutter>=006-2 missing dependency for xvattr : xfree86 missing dependency for eclipse-ve : eclipse<3.3 missing dependency for flumotion : twisted-web missing dependency for gg2 : arts missing dependency for man-pages-cs : groff-utf8 missing dependency for qc-usb : kernel26<2.6.26 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28Give pacman-optimize a refresherDan McGee
This patch addresses quite a few lingering issues in the pacman-optimize script. FS#11767 provoked this look-over and the following issues were noticed and fixed: * If an alternate dbroot was specified, then the lockfile location was never updated to reflect it. The lockfile location is now set after all dbpath initialization. * The inclusion of a trailing slash on dbroot was problematic and led to the following command being executed: bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \ -C /var/lib/pacman/.new/ It is doubtful we meant to create a hidden directory like this below our database root, only to go and delete it a second later and then re-extract. Fix the whole thing by ensuring our dbpath has its trailing slash stripped and then appending it when necessary. * The DB extraction was performed twice for no real apparent reason. This opens the door for extraction problems the second time around, leaving you with no original database to fall back to. Change the behavior so we only extract once, and then perform a directory shuffle once we verify the checksums are correct. * Perform an explicit sync after we drop the new database on the disk. It should work better this way. * Tighten up our check for a pacman lockfile and the time we create one. There is still a possible race condition but the window is shorter. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28Update Chinese translationLyman Li
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-28makepkg: fix updating PKGBUILD when building SCM packagesAllan McRae
Fixes a bug and resets pkgrel to 1 when bumping pkgver Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-18repo-add: Use openssl instead of md5sumDan McGee
This is similar to the change we made in makepkg so it is cross-platform compatible and doesn't require coreutils. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-18Correctly close the pipe used for scriptlet executionDan McGee
We never had a call to pclose() in here before, leaving our file descriptor in some sort of limbo state. In addition, clean up some of the other logic such as directly calling exit(1) on a popen() failure rather than going to our cleanup block, and handling and respecting the exit status of the subprocess correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Minor updates to Russian translationSergey Tereschenko
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Merge branch 'maint'Dan McGee
2008-10-12makepkg: allow compression type to be autodetectedDan McGee
Inspired by commit 7e8f1469c4168875b54956d63884b8583ce99e38, use our given PKGEXT or SRCEXT to determine what method of compression to use on the package we create. If the extension is invalid, this should fall back to creating a non-compressed tar file. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Quiet up the make process a bitDan McGee
When we do our sed edits, we really don't need every command printed out to the terminal. Now with "make -s", the output is quite palatable. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Make interrupt handler async-safeDan McGee
Calling printf() in a signal handler can be dangerous, so avoid it by writing directly which is guaranteed to be safe according to signal(7). Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Remove unnecessary unistd.h header inclusionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Attempt to idiot-proof making and refreshing docsDan McGee
I mess this up more often than not, and maybe this will do the trick. Remove the --enable-asciidoc option as it has been superseded by the --disable-doc option in usefulness. If you want to skip building docs, you skip building all docs which is much easier when it comes to ensuring the make 'dist' and 'distcheck' targets will always build the manpages and always build the most up to date manpages. Developers shouldn't be affected in their normal builds, nor should end users of the source tarball. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Rework fakechroot checkingDan McGee
Do the checks in the tests that need it, and get rid of some of the cluttered output when it is not available (one line per test run). Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Reduce number of calls to getcols()Dan McGee
Every call to getcols() results in two ioctl() calls, which we really didn't need as changing the number of columns in mid-print would be pretty crazy. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12libalpm: handle syscall interruption correctlyDan McGee
It is possible to throw EINTR from a system call such as open(), close(), or waitpid() if custom signal handlers are set up and they are not initialized with the SA_RESTART flag. This was noticed by Andreas Radke when ^C (SIGINT) was given during the call to waitpid(), causing it to throw the EINTR error and we could not accommodate it. Simply wrap these calls in a simple loop that allows us to retry the call if interrupted. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Ensure we don't have double slashes when creating frontend pathsDan McGee
Because libalpm always returns a root path with a trailing slash, when we use it to create our unspecified paths we get double slashes in the result. Use the fix suggested by Jürgen Hötzel to remedy this. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-09-03Remove unnecessary initialization in new functionsDan McGee
We don't need to zero things out, we are already using calloc for this purpose. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-09-02Another attempt at fixing totaldownload.Xavier Chantry
This fixes FS#11339, which is a regression of commit 89c2c5196: When totaldownload is enabled, the database downloading percent (-Sy) is always at 0. That is because we have no guarantee that the totaldownload callback was called by libalpm. In particular, it is not called (and it would not make sense to) when a single file is downloaded, like it is the case with databases. So the correct way to detect if totaldownload should be used is checking both config->totaldownload and list_total, like it was already done in several places in the cb_dl_progress function. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-28Separate targets on -Qi/-Si with a newline.Xavier Chantry
This fixes FS#11331 The newline was lost with commit 9451b2e4f23a3c566fcfe3420c379b3cb3eb1f90. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-26Merge branch 'maint'Dan McGee
2008-08-26New Ukrainian translationv3.2.1Roman Kyrylych
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Updates in preparation for 3.2.1 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25makepkg : allow to specify a download filenameXavier Chantry
A source entry can now have the following form, to specify a different filename : "filename::http://path/to/file" Of course, the old syntax is still supported : "http://path/to/file" And as before, in the second case, the filename used is simply "file". This fixes FS#11292, because handling multiple source files with the same name is now possible (just choose a different filename). But it will also allow to deal much more nicely with funny url like this by using a sane filename (and unfortunately, there are quite a few) : http://www.vim.org/scripts/download_script.php?src_id=6992 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Rename alpm_db_get{pkg,grp}cache to alpm_db_get_{pkg,grp}cacheXavier Chantry
This is more consistent with the private functions : _alpm_db_get_{pkg,grp}cache Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Change checkdeps and checkdbconflicts to be more flexible.Xavier Chantry
These two functions now take directly a package list rather than a database. checkdbconflicts was renamed to checkconflicts. Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-25pacman : smarter optdepends handling.Xavier Chantry
During an upgrade, only the new optdepends will be displayed, to only keep the useful information and not clutter pacman output too much. The whole optdepends list is always available with -Si / -Qi. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25makepkg.conf : some info / docs adjustementsXavier Chantry
After commit 7865fb9af487, info pages are now treated like man pages. This means even with !docs, info pages will still be included. And including info pages was the main reason the docs option was enabled by default recently. So this is now longer needed, and we can revert back to !docs by default for disabling gigantic html pages and other docs. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Final updates on all translation for 3.2.1Xavier Chantry
* Update all .po files because of the last "-q,--quiet" fix. Also for some strange reason, en_GB was missing a few c-format tags. * Finally, delete all unused translations. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Add missing comma to -S --help messageRoman Kyrylych
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25Update Portuguese (Brazil) translationHugo Doria
Xav : alignment fixes
2008-08-25Update Turkish translationSamed Beyribey
2008-08-25Update Chinese Simplified translation甘露(Lu.Gan)
2008-08-24Update Czech translationVojtěch Gondžala
2008-08-24Update German translationMatthias Gorissen
2008-08-24Update Russian translationSergey Tereschenko
[Xav: one minor fix to libalpm po file]
2008-08-23Merge branch 'maint'Dan McGee
2008-08-23Allow sync200 pactest to pass without libdownload.Xavier Chantry
This was a stupid and unimportant regression caused by commit 4476598e4e128f4595d5383ecb51a9576a447b5b . When libdownload is not available, a xfercommand is needed for this pactest to run properly. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Add autotools magic for pactestsHenning Garus
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff of scripts/Makefile.am, which replaces predefined expressions in NAME.py.in pactests with configure variables. This can be used to write pactests which consider compile time options. Signed-off-by: Henning Garus <henning.garus@gmail.com> [Dan: autotools are tough, make a few adjustments for correctness] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg : add --config option for an alternate config file.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Remove DB_COMPRESSION and DB_CHECKSUMS from makepkg.confXavier Chantry
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used anywhere. This also removes the dependency on makepkg.conf in repo-add, so repo-add no longer needs to source makepkg.conf And instead of DB_COMPRESSION, it seems better to just check the extension of the repository file. It does not make sense to have a tar.gz file with a tar.bz2 extension or whatever. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Update British English translationXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Update French translationXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-08-23Update Hungarian translationNagy Gabor
2008-08-23Update Spanish translationJuan Pablo González Tognarelli
Xav : one minor fix (a missing %s in the downgrading message).
2008-08-23Update Polish translationMateusz Herych
2008-08-23Update Italian translationGiovanni Scafora