summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-02Add more pactests to increase code coverageDan McGee
These new tests test the following ops at least once: -Ss, -Si, -Sl, -Sp, -Qs, -Qi, -T Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Remove _alpm_depmiss_isinDan McGee
This is unneeded now that commit 2ed6b482d2fce916466e44e37930f0b0c0d928bb has eliminated the last user of this function. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Add 4 new pactests to get better code coverage by pactestDan McGee
I started playing around with gcov today and it showed a few places in the code that we don't test at all. This is the start of ensuring that we execute most of the code in our codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02parseconfig: refactor duplicate code out into a functionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Remove "done" messages from frontend callback functionDan McGee
This should simplify our output a bit when it comes to determining whether or not we need a newline in our output. A "done" message was almost always immediately followed by another start message anyway (or some other output), so it really isn't necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Add --ignoregroup to completion filesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Fixes for the ineptitude of libalpm DB registrationDan McGee
When a DB is "registered" in libalpm, it goes and tries to create paths and other BS which is stupid, but a pain in the butt to fix. For now, work around this terrible behavior by ensuring our paths are always set before we call any alpm_db_register function. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Make pacman path handling (hopefully) a bit more intuitiveDan McGee
I made pacman path handling a bit odd with my rootdir changes a while back in order to increase flexability. However, it had a bit of a drawback in that dbpath/logfile/etc. would not default to being under the rootdir if that was the only parameter you specified in the config file or on the command line. (Note: logfile handling was always broken due to the explicit logfile line required in config files) Pacman now works as follows: if a rootdir is specified but not dbpath or logfile: attempt to place the logfile and dbpath in their default locations under root if an explicit dbpath/logfile is specified: interpret these as absolute paths, regardless of the rootdir setting if nothing is specified: fall back to configured defaults Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-02Add new --needed option for -S.Chantry Xavier
During a pacman operation such as a group install, pacman can ask several questions such as "local version is up to date. Upgrade anyway?". They are usually all answered either by yes or by no: * yes when you want to reinstall all the targets. * no when you only want to install the missing ones (either because you are installing a group, or because you are copying a pacman -S line from wiki or whatever). So instead of asking this question for each target, it is now now configured with a flag. Yes will be the default -S behavior, No will be achieved with the --needed flag. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-01Unify dump_pkg_full in pacman [-Si, -Qip, -Qi and -Qii]Nagy Gabor
dump_pkg_sync is now a trivial wrapper for dump_pkg_full Some smaller changes: * string_display function added to util.c [prints None in case of empty string] * Filename field added to -Qip * rename License to Licenses * 'Compressed Size' used instead of 'Download Size' for -Qip Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: fix whitespace errors, spacing issues, const modifiers] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-01New sync1005 and sync1006 pactestsNagy Gabor
This pactest checks what happens if a package exists in two sync repos. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: added sync1006, same test with different versions] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-01Minor fixes in sync.c and deps.c.Chantry Xavier
* memleak found by Nagy in checkdeps * an useless line found by Nagy in resolvedeps * data wasn't set to the missing dependencies in sync_prepare * use the MALLOC macro in resolvedeps Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-01Ensure 0644 permissions for install and changelog filesAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-30Remove alpm_depcmp DEBUG outputDan McGee
alpm_depcmp is simple enough that we shouldn't need constant debug logging, and the logging we do have in there negatively impacts our speed regardless of whether we actually are seeing it or not. If it ever needs debugging, it would be trivial to reimplement it by just temporarily reverting this commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-30Remove some null checks in _alpm_checkdepsDan McGee
Hopefully these are unnecessary, as they were probably added originally to cover up a problem instead of finding the root cause. I'd rather fail hard in these cases anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-30alpm_checkdeps clean-upNagy Gabor
No bugfixes, just makes the code human-readable Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-29Move requiredby computation before any display startsDan McGee
This should reduce the chances of people thinking pacman hung during the middle of something. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25_alpm_checkconflicts splitNagy Gabor
_alpm_innerconflicts: check for target<->target conflicts _alpm_outerconflicts: check for target<->localpkg conflicts This will be useful in sync.c clean-up and in testdb.c As an application the patch also fixes a misleading message (and a memleak) in add.c Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25pacman/query.c : -Qo optimization.Chantry Xavier
I didn't understand why realpath was called on every files of every filelist in query_fileowner : ppath = resolve_path(path); It turns out this is needed for the diverted files. For example, cddb_get installs /usr/lib/perl5/site_perl/5.8.8/CDDB_get.pm which actually ends in /usr/lib/perl5/site_perl/current/CDDB_get.pm . And for making pacman -Qo /usr/lib/perl5/site_perl/current/CDDB_get.pm , realpath has to be called on both the target, and the file in the filelist. However, realpath is costly, and calling it on every single file resulted in a poor -Qo performance. Worst case : pacman -Qo /lib/libz.so.1 0.35s user 1.51s system 99% cpu 1.864 total So I did a little optimization to avoid calling realpath as much as possible: first compare the basename of each file. Result: src/pacman/pacman -Qo /lib/libz.so.1 0.24s user 0.05s system 99% cpu 0.298 total Obviously, the difference will be even bigger at the first run (no fs cache), though it's quite scary on my system : 1.7s vs 40s previously. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Move mbasename from pacman.c to util.cChantry Xavier
This function can be useful in other places. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Fix for sync1003 and sync1004 pactestsNagy Gabor
checkdeps and resolvedeps now take both a remove list and an install list as arguments, allowing dependencies to be calculated correctly. This broke the sync990 pactest, but this pactest used dependencies and provides in an unusual way, so it has been changed. Dan: the sync990 pactest was just plain wrong. It didn't satisfy the dependencies correctly, so should never have succeeded. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: some variable renaming, clarification in commit message] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Add -q/--quiet option for controlling output.Artyom
Currently this only affects -Ss, -Sl, and -Q to output less information (only package names). In the future, we can reuse this flag for other things as well. [Aaron: rewritten as a front-end flag] Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com> [Dan: squashed commits together] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Fix memleak when querying package file(s)Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Force mode of all database files to 644Aaron Griffin
In the case of a packaging error where install or changelog had bad permissions, pacman respected the original permissions without trying to fix it - this means that some operations (changelog) artificially required root permissions to run In addition, minor function housekeeping on _alpm_unpack Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-25Additionally search for non-regex strings on a db search operationAaron Griffin
This closes out FS#6500 and covers cases where the package names contain regex characters (i.e. the case of dvd+rw-tools) Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-25Make the download failure message more clearAaron Griffin
Use the word "disk" in place of the host name for local files Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-25Fix several memleaks, mostly related to errors handling.Chantry Xavier
* The frontend calls alpm_trans_prepare(&data), and in case of errors, receive the missing dependencies / conflicts / etc in the data pointer. It apparently needs to free this structure totally with : alpm_list_free_inner(data, free) alpm_list_free(data) So I added alpm_list_free_inner(data, free) in pacman/{sync.c,remove.c,add,c} * in _alpm_sync_prepare, the deps and asked lists were not freed in case of errors (unresolvable conflicts). Besides the code for handling this case was duplicated. * in _alpm_remove_commit, free was used instead of alpm_list_free for newfiles. * newline fix in pacman/sync.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-25Fix a memleak in _alpm_sync_free.Chantry Xavier
An alpm_list_free call was missing. Also make use of alpm_list_free_inner in both _alpm_sync_free and _alpm_trans_free. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-21Remove -F/--freshen operationDan McGee
This operation made sense in the days before sync DBs existed, but it no longer has the same usefulness it once did. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-21Add some additional files to .gitignoreDan McGee
*.lineno - these show up when you use a shell less-featured than bash cscope.*.out - These show up when you build reverse databases using -q Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-21Improved 'dependency cycle' warningNagy Gabor
From now on libalpm informs user about packages which will be installed/removed in wrong order. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-21Remove duplicated get_upgrades function, use sysupgrade instead.Chantry Xavier
The alpm_get_upgrades was exactly the same as find_replacements + _alpm_sync_sysupgrade, except that it automatically made the eventual replacements, without asking the user : Replace %s with %s/%s? [Y/n] The replace question, asked in find_replacements. can now be skipped by using a NULL trans argument, so that we get the same behavior as with alpm_get_upgrades. So alpm_db_get_upgrades() can now be replaced by alpm_sync_sysupgrade(db_local, syncdbs). Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20doc: use source highlighter on PKGBUILD guide, update wrong example textDan McGee
Note that if you are building manpages with asciidoc now, you must also have source-highlight installed for it to correctly generate everything. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20Turn HACKING into an asciidoc documentDan McGee
Add some hints so we can use asciidoc on the HACKING document. It is still readable as text, but a simple 'asciidoc HACKING' command will give you a nice pretty guide now. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20New alpm_list_join functionNagy Gabor
This O(1) function joins 2 lists. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20Update PKGBUILD manpage with versioned conflicts.Chantry Xavier
As the b96922679e4ed14aa687bf194b766d82a1d10577 commit showed with two pactests (which were renamed to depconflict110/111), versioned conflicts are now possible. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-20Add missing header includes for setlocaleDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-19Spruce up HACKING a bitDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18Versioned provisions.Nagy Gabor
This patch introduces versioned provisions in "provision 1.0-1" format. _alpm_db_whatprovides was modified accordingly (added sync500.py), alpm_depcmp was modified accordingly (add043.py passes now; added add044.py and add045.py). Notes: alpm_db_search now uses the whole versioned %PROVIDES% string in its search. debug logging was simplified in alpm_depcmp. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xavier: fixed a few typos, duplicate const strings with strdup before modifying them, put some debugging back in alpm_depcmp, minor code cleanups (var/function renaming), added a note in PKGBUILD man page.] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: made strcmp checks clearer, added a comment] Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18Fix sh and scriptlet interactionDan McGee
dash doesn't pass positional parameters to sourced scripts, causing install scripts to fail. Instead of sourcing the script, make it executable and call it directly which allows positional parameters to be passed correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18Add the pmconflict_t type.Nagy Gabor
pmdepmissing_t was used for two totally different things : missing dependencies, and dependency conflicts. So this patch simply adds a type for dep conflicts, and convert the code to use it. This fix the TODO in conflict.c : /* TODO WTF is a 'depmissing' doing indicating a conflict? */ Additionally, the code in conflict.c now eliminates the duplicated conflicts. If pkg1 conflicts with pkg2, and pkg2 conflicts with pkg1, only one of them will be stored. However the conflict handling in sync_prepare (sync.c) is still very asymetrical, and very ugly too. This should be improved in the future (there is already a pending patch from Nagy that cleans it a lot). Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-18Simple s/conflict/fileconflict/ renaming.Chantry Xavier
The names related to conflicts are misleading : For dependencies conflicts, the type is pmdepmissing, and the function names contain just "conflict". For file conflicts, the type is pmconflict, and some functions contained just "conflict", some others "fileconflict". So this is the first step for improving the situation. Original idea/patch from Nagy, but the patch already didn't apply anymore, so I did it again. The main difference is that I kept the conflictype, with the following renaming : pmconflicttype_t -> pmfileconflicttype_t PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-18Minor rephrasing of the question asked by -Sc.Chantry Xavier
Suggested by stonecrest on irc : 'I think "uninstalled" would be better, as it implies that the package was once installed and since removed. Otherwise a user might wonder why there are non-installed pkgs in cache' Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-18POSIX shell does not specify meaning of source operationDan McGee
Just use '.' operator instead. Oops. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18Extend the -Sc operation to also clean up unused sync databases.Chantry Xavier
We discussed this with stonecrest on IRC : 20:46 stonecrest >> someone brings up a good point.. why aren't repos that aren't in the pacman.conf removed from /var/lib/pacman? 20:46 stonecrest >> i have 118mb and 24 dirs in there, but only 5 repos at present 21:26 stonecrest >> shining: i guess you could prompt the user on deleting every dir in /var/lib/pacman.. since it shouldn't happen that often except for the first time 21:30 stonecrest >> could be part of pacman -Sc.. what else were you thinking? I already heard about this before, but it sounded dangerous to me. I didn't even think about a simple prompt. I also didn't know where this code would fit. And it fits well with -Sc, I borrowed most of the code from sync_cleancache. Example session : Cache directory: /var/cache/pacman/pkg/ Do you want to remove non-installed packages from cache? [Y/n] n Database directory: /var/lib/pacman/ Do you want to remove unused repositories? [Y/n] Do you want to remove /var/lib/pacman/sync/pacman-git? [Y/n] Do you want to remove /var/lib/pacman/sync/deltatest? [Y/n] Database directory cleaned up Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-18libalpm/deps.c : improves IgnorePkg handling in resolvedeps.Nagy Gabor
resolvedeps will now search for other satisfiers when we don't let it add a package from IgnorePkg. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-18Remove the IgnorePkg handling from alpm_pkg_compare_version.Chantry Xavier
And check the IgnorePkg handling is done correctly in the other places. For example, -Qu and -Su will automatically skip the ignored packages (-Su will print a warning), but -S will install ignored packages anyway, because it was asked explicitly. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-11-18Don't filter package files output based on dir/file statusDan McGee
This caused more problems than it solved, especially with -Qlp output and files that are new to the new package. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17pacman/sync.c : remove duplicated fallback on providers.Chantry Xavier
The fallback on providers when a target is not found was already made in the backend : libalpm/sync.c , _alpm_sync_addtarget . So I removed it from the frontend. The sync500 pactest proves this fallback still works correctly. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-17Remove provide.c and provide.h .Chantry Xavier
This file only contained one private function : _alpm_db_whatprovides . And the public alpm_db_whatprovides was in db.c , so I moved everything there. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: updated POTFILES.in as well] Signed-off-by: Dan McGee <dan@archlinux.org>