summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-19makepkg.conf: make keeping docs the defaultDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19autoclean.sh: Fix paths to po/ dirDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19Add libalpm Türkçe (Turkish) translationAlper KANAT
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15Use access() instead of stat() when possibleDan McGee
We were using the stat() system call in quite a few places when we didn't actually need anything the stat struct returned- we were simply checking for file existence. access() will be more efficient in those cases. Before (strace pacman -Ss pacman): % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 33.16 0.005987 0 19016 stat64 After: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 34.85 0.003863 0 12633 1 access 7.95 0.000881 0 6391 7 stat64 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15makepkg: add several quotes needed after nullglob.Xavier Chantry
After the "shopt -s nullglob" change, all regular expressions should be properly quoted. This commit only fixes the ones I found, there are probably others left, so this should be kept in mind for easier future fixing. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15makepkg: Add missing quotes for the source array.Xavier Chantry
Now makepkg can handle filenames with whitespaces in the source array. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-15Use openssl for checksum verification instead of *sum utilitiesSebastian Nowicki
md5sum, sha1sum, etc, do not exist on BSD systems by default. Openssl is a good portable alternative. This also brings in a dependency for openssl. Closes FS#10530. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Expand PKGBUILD documentationDan McGee
Add documentation for $startdir, $srcdir, and $pkgdir variables, as well as general information about the build() function and about custom variables in PKGBUILDs. This addresses FS#10634. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Document pacman -q/--quiet operationDan McGee
Fixes FS#10644. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Combine repo-add and repo-remove into one scriptDan McGee
They shared about 75% of their code, so there is no real reason we should maintain them separately. Merge the differences accordingly and add a check based on the basename of the command used to decide what behavior to follow. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14repo-*: allow use of readlink or realpathDan McGee
Linux coreutils provides readlink, and BSD systems tend to have realpath available. Both commands provide similar functionality but of course have different names. Add a check for either and use what is available. While doing this, also unify some of the differences that have cropped up between repo-add and repo-remove. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-14Move geninteg block in makepkg before error checkingAllan McRae
This patch moves the generating of integrity checks to before any error checking takes place in the PKGBUILD file. This allows integrity generation to complete when unrelated errors exist in a PKGBUILD file and allows the removal of multiple checks of the GENINTEG variable that would otherwise be needed. In addition a minor fix is made to a comment. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-12Merge branch 'maint'Dan McGee
2008-06-12fr.po : fix one minor alignment problem.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2008-06-12Add pacman Türkçe (Turkish) translationAlper KANAT
No libalpm translation yet. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-12Spanish translation updatesJuan Pablo González Tognarelli
Fixes to old translations and new strings for upcoming 3.2 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-12Use shell builtin to list files for package inclusionDan McGee
On BSD systems, as super user, the 'ls' command displays all dot files by default, causing these to get included when not intended. If we use the bash glob operator, we can avoid issues with ls on different platforms; however, we need to turn the nullglob shell option on first to ensure we don't have problems in empty directories. Originally-noticed-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Allow use of GIT_VERSION in documentation dirDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08makepkg: remove deprecated --usesudo codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08makepkg: add --allsource optionAllan McRae
This supplements the --source option and does nearly the same thing, except downloaded source files are included in the archive as well. The sources are now packages with a pkgname/ prefix. Original-work-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-08Various updates needed prior to a new releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-07Minor fix to German translationThomas Bächler
Signed-off-by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-06bacman - regenerate package from systemAllan McRae
Original work by Carlo "carlocci" Bersani with additions by Xavier Chantry and Allan McRae This script rebuilds an already installed package using metadata stored into the pacman database and system files. Replaces the outdated re-pacman script Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-05Reformat -Sg output to look like -QgDan McGee
We used list_display() on -Sg output, which might have been slightly nicer looking but made it much harder to parse in something like a shell script. Reformat it in the 'grpname pkgname' format that -Qg is already using. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Don't display filename on -Qip operation.Xavier Chantry
Some previous commits apparently broke the get_filename function for package loaded with pkg_load (on a -Qip operation) because this field was no longer filled. Now pkg_load fills it. But the -Qip operation needs to be run like this : -Qip <filename>, so the filename is already known. There is no need to display it again. Besides, on a normal -Qi operation, the filename is not displayed either because this information is not stored in the local database. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04src/pacman/sync.c : cleanup of pacman_syncXavier Chantry
By putting the search / group / info / list operations just after the -Sy op, we can simplify several checks : 1) the check for "missing targets". Since we took care of the above operations, we now have less cases to consider : * -Syu or -Su : we can proceed * -Sy : we can end now (this is actually a bugfix) * -S : this op requires targets, so exit with an error 2) the check to see if a transaction is needed. If we arrive at the end of the function, it is either because we have -Su or -S <targets> so we already know a transaction is needed there. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Get rid of double / in database paths.Xavier Chantry
Errors like the following one happen regularly (for unknown reasons...) : error: could not open file /var/lib/pacman/local//glibc-2.7-9/depends: No such file or directory Anyway, every time an user reported an error like that, it always seemed like he thought the error was caused by the double /, which is obviously wrong. Since db->path always include a trailing /, there is no need to add one when concatenating paths in be_files.c or add.c. Additionally, some static strings were switched to dynamic. And the computation of the "dbpath"/"pkgname"-"pkgversion" was refactored in db_read, db_write and db_remove with a get_pkgpath static function. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Reimplement TotalDownload functionalityDan McGee
Add a new totaldlcb callback function to libalpm and make pacman utilize it when the TotalDownload option is enabled. This callback function is pretty simple- it is meant to be called once at the beginning of a "list download" action, and once at the end (with value 0 to indicate the list has been finished). The frontend is responsible for keeping track of adding individual file download amounts to the total xfered amount in order to display some sort of overall progress. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Use correct C type for file sizesDan McGee
We have been using unsigned long as a file size type for a while, which works but isn't quite correct and could easily break. Worse was probably our use of int in the download callback functions, which could be restrictive for packages > 2GB in size. Switch all file size variables to use off_t, which is the preferred type for file sizes. Note that at least on Linux, all applications compiled against libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS is defined to be 64 or there will be some weird issues that crop up. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-03libalpm/md5: Fix license headerDan McGee
This was mistakenly referencing the LGPL even after the XySSL code bump, so fix the license clause to be correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-01Don't require --force when using the --nobuild optionAnton Fiuman
makepkg should not abort with error when a user uses the --nobuild option to extract sources if a package has already been built. Signed-off-by: Anton Fiuman <llexiw@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31makepkg: remove some dead TODO codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-31Allow GIT version to be used in pacman buildsDan McGee
Add a new configure flag, --enable-git-version, that allows the output of 'git describe' to be used in the version string associated with this package. This could aid in debugging for users that are using a development version of pacman and we should be able to figure out which cut of code they are using. Sample output: $ pacman --version Pacman v3.1.4-190-g4cfa-dirty - libalpm v2.3.1 $ makepkg --version makepkg (pacman) 3.1.4-190-g5861-dirty Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-30Fix versioncmp regression after updateDan McGee
Commit 84283672853350a84d2a71b72dc06e180cad1587 introduced the regression, and a previous commit introduced the vercmptest.sh test script to track down these issues. This commit solves the problem by removing the previous attempt at locating the pkgrel portions and replacing it with something that performs the correct logic. While tracking down everything I needed to, I also found a mistake in one of the pactests which is fixed here as well as increased the functionality and verbosity of the vercmptest script to both print out each test it is running as well as automatically run the mirror of each test case. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Add simple vercmp test scriptDan McGee
Commit 84283672853350a84d2a71b72dc06e180cad1587 updated the versioncmp code in libalpm. Unfortunately for us, it also introduced the regression that becomes apparant with the following upgrade: warning: sonata: local (1.5-2) is newer than extra (1.5.1-2) Add a vercmptest.sh test script that is run during the make check phase which now points out three regressions in the version comparison function that will need fixing. All current tests in this script pass with the old versioncmp code. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Add missing NULL set in group printingDan McGee
If we don't set the pkgname var to NULL, we run into all sorts of beautiful segfault behavior when a group spans multiple repositories and we try to print out the location of the former list. Easy fix. This regression was introduced in bf8670036907b3ede18d37b7a3f0f7e14542a5ac. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Merge branch 'maint'Dan McGee
2008-05-29Add trailing / to DESTDIR for stupid Makefiles.Geoffroy Carrier
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Tidy up of the handle struct in libalpmAllan McRae
Removed unused handle->uid from pmhandle_t. The need to check permissions should be determined by the frontend (and is in pacman). Fixed comment on noextract in pmhandle_t. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Remove PM_TRANS_EVT_EXTRACT_START.Xavier Chantry
This event was unused, was missing the equivalent EXTRACT_DONE event, and was useless because we already have ADD / UPGRADE START and DONE events. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29be_files : stores REPLACES and FORCE in desc.Xavier Chantry
repo-add and db_read both assume that REPLACES and FORCE fields are in the desc file, so do that for db_write as well (instead of depends file). Note that db_write is currently only used on the local database. And the only purpose of replaces and force in local database is for information purpose (available on -Qi operations). So this is not a big problem. Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-May/011859.html Acked-by: Dan McGee <dan@archlinux.org> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Pactests for sync operations with NoUpgrade and NoExtractAllan McRae
This adds the sync equivalents of upgrade010.py and upgrade070.py. Both additional test pass. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Acked-by: Dan McGee <dan@archlinux.org> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29makepkg - add check for valid options in PKGBUILDAllan McRae
This patch removes the code block in makepkg that checked for depreciated options in a PKGBUILD and provided a workaround. Unknown and depreciated options are upgraded to error conditions. Also, removed TODO regarding including install script if exists and $install is unset. That should never happen. Signed-off-by: Allan McRae <mcrae_allan@hotmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Add some verbosity to _alpm_db_read.Nagy Gabor
Name and version are computed from "/var/lib/pacman/..." pathname. And the %NAME% and %VERSION% fields from the desc file were not even read. So now, when we read the desc file, we make sure the %NAME% and %VERSION% fields are consistent. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Fix for remove052.py by moving recursedeps before checkdeps.Nagy Gabor
In the case of -Rs operation, first pulling the dependencies with recursedeps before calling checkdeps takes care of the dependency chain of remove052 pactest. In the case of -Rcs, we can keep the old behavior because we have no problem there (any dependency returned by checkdeps will be added to the remove list because of -Rc) and we have to run recursedeps on the final remove list anyway to catch all orphans. Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Pactest for removing multiple items in a dependency chain.Allan McRae
This adds a test for when removing multilpe packages recursively from a chain of dependent packages. This situation can occur when removing installed dependencies with makepkg if a "makedepend" recursively depends on a "depend" or if redundant dependancies are included. Signed-off-by: Allan McRae <mcrae_allan at hotmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29No error in makepkg when removing deps failsAllan McRae
Catches error from when pacman is unable to remove dependencies after successfully building package and prints warning. Fixes FS#10039. Signed-off-by: Allan McRae <mcrae_allan at hotmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Use chown 0:0 instead of root.rootSebastian Nowicki
On BSD systems using a dot as a separator is not allowed. On Mac OSX it is deprecated. A colon should be used instead. BSD systems also use the "wheel" group instead of "root" to indicate the "super user" group. Both groups use the id of 0. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Acked-by: Aaron Griffin <aaronmgriffin@gmail.com> Acked-by: Dan McGee <dan@archlinux.org> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Use "legacy mode" on Mac OSX (for file command)Sebastian Nowicki
For some reason `file` on Mac OSX has different arguments than BSD and Linux; -i no longer prints out the mime strings. With the environment variable COMMAND_MODE set to "legacy", `file` behaves more like it does on Linux and BSD, i.e., `file -i` prints the mime type. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Acked-by: Dan McGee <dan@archlinux.org> Acked-by: Aaron Griffin <aaronmgriffin@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-29Allow an unprivileged user to create packages without fakerootSebastian Nowicki
When fakeroot was not in BUILDENV and the user was not root, makepkg still tried to use fakeroot for building packages. BUILDENV is now checked to see if fakeroot is enabled. If it is not enabled the package can still be built, but root will not have ownership of files. This is useful when users want to make packages for personal use and don't care about ownership. Closes FS#10450. Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>