summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-08-23Allow sync200 pactest to pass without libdownload.Xavier Chantry
This was a stupid and unimportant regression caused by commit 4476598e4e128f4595d5383ecb51a9576a447b5b . When libdownload is not available, a xfercommand is needed for this pactest to run properly. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Add autotools magic for pactestsHenning Garus
Added a Makefile.am for the pactest/tests dir. This is a blatant ripoff of scripts/Makefile.am, which replaces predefined expressions in NAME.py.in pactests with configure variables. This can be used to write pactests which consider compile time options. Signed-off-by: Henning Garus <henning.garus@gmail.com> [Dan: autotools are tough, make a few adjustments for correctness] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg : add --config option for an alternate config file.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Remove DB_COMPRESSION and DB_CHECKSUMS from makepkg.confXavier Chantry
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used anywhere. This also removes the dependency on makepkg.conf in repo-add, so repo-add no longer needs to source makepkg.conf And instead of DB_COMPRESSION, it seems better to just check the extension of the repository file. It does not make sense to have a tar.gz file with a tar.bz2 extension or whatever. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg: check all integrity sums found in the PKGBUILDDan McGee
Currently we use the INTEGRITY_CHECK array from makepkg.conf to limit both the integrity sums generated and checked. It doesn't make a whole lot of sense to ignore integrity sums that are present in a PKGBUILD, so this patch will enable checking any that are available, but will only print a warning about missing sums for those types found in INTEGRITY_CHECK. It also adds a slight optimization of checking for openssl- we only need to check once now because we use the same program for all checks. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Move -Sp implementation to the front-endNagy Gabor
This patch kills one of our hackish pseudo transactions: PRINTURIS. (The other one is -Sw) From now on, front-end must not call trans_commit in case of -Sp, it should print the uris of target packages "by hand" instead. PRINTURIS flag was removed, NOCONFLICTS flag can be passed to skip conflict checks. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23New public alpm_pkg_get_db functionNagy Gabor
This function returns with the origin database of a package. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23split yesno() into yesno() and noyes() functions.Xavier Chantry
The yesno function had a preset argument for specifying the default answer : yes or no. However, in all our calls to yesno, only one used the default "no" answer. Having to specify preset==1 for all the other cases was rather cumbersome. To make this easier, this commit adds a noyes function, with the following behavior : yesno() : default answer is yes noyes() : default answer is no Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Treat info pages like man pagesAllan McRae
As far a package building is concerned, info pages need to be treated in the same fashion as man pages in that they both can be compressed. This separates them from other forms of documentation and so it makes sense to make that distinction within makepkg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Pass the old package with PM_TRANS_EVT_UPGRADE_STARTNagy Gabor
This is more rational and coherent with PM_TRANS_EVT_UPGRADE_DONE. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pactest: remove need for pause when running testsDan McGee
Instead of pausing 1.5 seconds on tests that check file mtimes, change the mtimes to something in the far past so we can immediately tell if a file was modified and/or touched. This saves a decent amount of time on the upgrade tests which often check mtimes. 355 was a completely arbitrary time value, don't ask me why I picked it. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Cleanup of _alpm_pkg_compare_versions.Xavier Chantry
* Change the return values to be more informative. It was previously boolean, only indicating if a sync package was newer than a local package. Now it is a simple wrapper to vercmp, handling the force flag. * Remove the verbose output from _alpm_pkg_compare_versions. The "force" message is not so useful. The "package : local (v1) is newer than repo (v2)" message can be moved to -Su operation. For the -S operation, it is better to have something like : "downgrading package from v1 to v2" * Don't display the "up to date -- skipping" and "up to date -- reinstalling" messages, when the local version is newer than the sync one. * Fix the behavior of --needed option to not skip a target when the local version is newer, and clarify its description. * Add a new alpm_pkg_has_force function This allows us to access the pkg->force field like any other package fields. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23download : disable progressbar when total is unknown.Xavier Chantry
This is a work around for FS#8725. There are some bad combination of proxies and mirrors where the Content Length is not returned, and thus the progress bar can't be displayed correctly. Dan: Note that this patch also adds a "downloading" message when the progress bar is disabled, which was formerly not indicated at all in the output. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23fix HACKING asciidoc file.Xavier Chantry
The HACKING file seemed to be broken : http://archlinux.org/pacman/HACKING.html And indeed, running asciidoc HACKING issued a number of warnings : WARNING: HACKING: line 27: missing [paradef-default] C-style entry type: numbered : expected 1 got 3 WARNING: HACKING: line 44: list item 3 out of sequence WARNING: HACKING: line 49: missing [paradef-default] C-style entry type: numbered : expected 2 got 4 WARNING: HACKING: line 62: list item 4 out of sequence type: numbered : expected 3 got 5 WARNING: HACKING: line 69: list item 5 out of sequence type: numbered : expected 4 got 6 WARNING: HACKING: line 75: list item 6 out of sequence type: numbered : expected 5 got 7 WARNING: HACKING: line 83: list item 7 out of sequence WARNING: HACKING: line 104: missing [paradef-default] C-style entry WARNING: HACKING: line 116: missing [paradef-default] C-style entry WARNING: HACKING: line 126: missing [paradef-default] C-style entry I just followed the syntax example there : http://www.methods.co.nz/asciidoc/userguide.html#X56 And all is fine now :) Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman : clarify help message.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg : localize the Y/n part of the question.Xavier Chantry
pacman already localizes the yesno stuff, so doing the same in makepkg is more consistent. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23pacman: print optdepends on install and upgrade.Xavier Chantry
This implements FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Add new list_display_linebreak functionNagy Gabor
list_display puts several members on the same line, which is not appropriate for optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 The new list_display_linebreak function puts every member on its own line, which is much better with optdepends: Optdepends: foo: feature1 bar: feature2 baz: feature3 Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: implement this new behavior as a new function rather than as a parameter of list_display] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Move the the description parsing logic to string_display()Nagy Gabor
So dump_pkg_full will indent all strings correctly. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: add string_length function] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23makepkg: do insensitive comparisons of checksums.Xavier Chantry
This fixes FS#11283 , which was originally reported on the forums : http://bbs.archlinux.org/viewtopic.php?id=53794 Insensitive comparisons were implicitly made before since md5sum --status was used for checking. Now that we use openssl and compare checksums manually in bash, we lost that feature. This can be easily reintroduced using tr '[A-F]' '[a-f]' What convinced me to fix it is that the md5 command line tool generates md5sums in upper case by default : http://www.fourmilab.ch/md5/ And finally, A-F and a-f are the same in hex and both are used. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19Factor shell script size command into configure scriptDan McGee
Commit 149839c5391e9a93 introduced a small behavior regression as a drawback for a better portability. repo-add now includes the approximate size (to the nearest KB) rather than an exact size due to the switching of the du command to a more portable form. Instead of sacrificing the exact size, use configure to help us determine a valid command to acquire our filesize and place it in the sync database. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19repo-add: add optdepends to the sync database.Xavier Chantry
See FS#10630. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19repo-add: Fix whitespaces handling in variables.Nagy Gabor
repo-add didn't handle whitespaces nicely in fields value, and this has hurt us several times, first with provision version (FS#9171) and then with optdepends (FS#10630), so it is time to fix it. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19Remove an usused variable from alpm/util.c/_alpm_lckmk()Nagy Gabor
Probably a tweakable "lockdb-retry" option was planned which is not implemented. (Now it should be implemented in front-end.) So now this variable was unused and caused a small memleak. (FREE(dir) was not reached in case of error.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19libalpm/add.c : ensure the old pkg was fully loaded.Xavier Chantry
This fixes FS#11218. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-19pacman.c: fix typo s/NoPassiveFTP/NoPassiveFtpXavier Chantry
This fixes FS#11203. The doc has always mentioned NoPassiveFtp, but an inconsistency was introduced with commit 76f816b9f764434d02e90207ee4656ebae2b6a8c when case sensitive comparision was introduced, and was only found after commit b3e6cf652c9e989badaf5499abb1d64c1a110927 which dropped the case insensitive comparison. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13pacman.conf : add curl example for XferCommand.Xavier Chantry
curl is likely to be available on the majority of systems and supports the file:// protocol. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13pacman/callback.c : fix detection of totaldownloadXavier Chantry
This fixes FS#11180. The usage of the total percent was detected like this : /* use disp_percent if it is not 0, else show bar_percent */ However, it is very possible that the total percent is 0 at the beginning, if the first packages downloaded are very small compared to the total download. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-13Fix error when sourcing profile scriptAllan McRae
With the "set -e" property set, a failure when sourcing /etc/profile can cause makepkg to exit without error message. The bash-completion package activates this bug. Fixes FS#11179. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-09Fix creation of source package with local source filesAllan McRae
Fixes FS#11149. Signed-off-by: Allan McRae <allan@archlinux.org>
2008-08-08Fix segfault on x86_64 when using UseSyslogDan McGee
Due to differences in handling va_list between i686 and x86_64, this bug can only be seen on x86_64. va_list usage is not allowed but we had been getting away with it. See http://lists.opensuse.org/opensuse-programming/2008-02/msg00005.html for details and explanation. This fixes FS#11096. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-08Fix variable naming issues in _alpm_db_cmpDan McGee
When this function got a rewrite in commit f43805d875, argument and variable names got a bit mixed up when separating the casts from the strcmp operation. Fix the mixup which also fixes a possible segfault when this function is called. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-07doc: allow asciidoc to format the noteDan McGee
By doing the bolding manually, it doesn't look as cool in the HTML generated manpages. Let asciidoc do the work. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-05Avoid double slashes in URLs given to libdownload.Xavier Chantry
If a Server specified in pacman.conf had a trailing slash, libalpm ended up building URLs with double slashes, and this broke libdownload with errors like the following one : error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz' from 192.168.0.90 : Command okay So the public function alpm_db_set_server will make sure to remove the trailing slash of servers. For the private function _alpm_download_single_file, I only added a comment. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-05dload.c : drop the specific handling of file: url.Xavier Chantry
Before commit fc48dc31, file:/// urls forced the use of the internal downloader (libdownload), because the default XferCommand, wget, does not handle them. We tried to move away from forcing usage of libdownload, so this commit implemented the handling of file:/// urls manually. However, this implementation is way too basic. It does not handle the progress bar, thus nothing at all appears in pacman's output when a file: repo is synchronized, or when a file is downloaded from a sync repo. Also, it is not able to detect when the repo is already up-to-date. When libdownload was used, both were handled. It seems better to just drop this implementation for now. All users who use libdownload will get the much better file:// handling back. For the users of XferCommand, it will be more problematic, but they have several options: 1) Switch to a downloader handling file:// (wget doesn't, but curl does for example). 2) Drop the file:// repo, and set up light http or ftp servers instead. Consider that going that way would make this repo available for the whole local network, which can be useful. 3) Switch back to libdownload, which works perfectly for many users. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-04makepkg: fix download functions with weird urls.Xavier Chantry
This fixes FS#11076. 1) quote the url in get_downloadclient 2) only enable nullglob where it is needed You can see in 7fc306cd41 that nullglob was only enabled for one part, and that it already caused other problems, which were fixed in 7ff5a917fd0. Thanks to Henning Garus for pointing out that nullglob was problematic with urls containing expansion char like '?'. 3) change get_downloadcmd which displayed the download command line to download_file which actually executes the download. It seems nicer that way. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-04makepkg: Clarify usage instructions for --allsource/--sourceDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-30Version bumps to configure for 3.2.0 releasev3.2.0Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-30NEWS: updates from MLXavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-30Final update of all translations.Xavier Chantry
Two recent commits slightly broke the translations, so this fixes all of them. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Update README file.Xavier Chantry
Several pieces of information were outdated for the 3.2 release. Add a section for the API changes between 3.1 and 3.2. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> [Dan: small updates/grammar corrections] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Further updates to submitting-patchesDan McGee
Xavier started the job, this should clean it up and get it up to date that final bit. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Update submitting-patches file.Xavier Chantry
The submitting patches page needed a bit of updating. It was currently a mash-up between the pre and post git eras. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29makepkg: Fix STRIP_DIRS test.Xavier Chantry
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29makepkg : use /etc/profileXavier Chantry
This fixes FS#9486. source /etc/profile instead of all individual files in /etc/profile.d/* (which is done by /etc/profile anyway). Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Put CleanMethod to pacman.conf (commented out)Nagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Remove UseColor from front-endNagy Gabor
This option wasn't used. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29New fileconflict005.py pactestNagy Gabor
This makes the fileconflict004.py test complete. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-29Small fix to pt_BR translation.Robson Roberto Souza Peixoto
Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-25Small fix to Italian translationGiovanni Scafora
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>