| Age | Commit message (Collapse) | Author |
|---|
|
SIZECMD was replaced in 1af766987f with a POSIX solution, and this token
is no longer used/needed.
|
|
When --needed is used, up to date packages are now filtered out
before showing the group select.
Fixes FS#22870.
Signed-off-by: morganamilo <morganamilo@gmail.com>
|
|
Currently when attempting to sync a group where all packages are
ignored, either by ignorepkg, ignoregroup or --needed, pacman
will error with "target not found".
Instead, if a group has no packages check if the group exists
before throwing an error.
Signed-off-by: morganamilo <morganamilo@gmail.com>
|
|
Use BytesIO instead of StringIO, and ensure that we unicode-encode data
where needed.
|
|
Upon receiving SIGINT a flag is set to abort the (curl) download.
However, since it was never reset/initialized, if a front-end doesn't
actually exit on SIGINT, and later tries any operation that needs to
perform a new download, said download would always get aborted right
away due to the flag not having been reset.
|
|
Variable dload_interrupted is used both to abort a download because
SIGINT was caught, and when a file limit is reached. But raising SIGINT
is only meant to happen in the first case.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver()
will change the value of pkgver anyway, and there's no point in linting the
old value. update_pkgver() will call check_pkgver() itself to validate the
new value.
However, that "optimization" only holds if we're definitely going to call
update_pkgver() later; and that's way more complicated than
if (( PKGVERFUNC )); then
it's more like:
if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then
Which is to say: If I have a PKGBUILD with pkgver():
* if I run `makepkg -g` I expect it to lint pkgver, but it won't
* if I run `makepkg -R` I expect it to lint pkgver, but it won't
* ...
So let's fix that.
Rather than try to keep a huge list of conditions in sync with the flow of
makepkg.sh.in, let's just drop it. As far as I can tell, the only thing
that skipping lint_pkgver() really enables is letting the PKGBUILD author
write `pkgver=` in the initial version, and letting pkgver() fill it in.
They can just start writing `pkgver=0` for that workflow.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Currently, if checking the validity of packages fails due to an access
error on one or more packages, the user must sift through debug output
in order to find the culprit package(s). This patch adds a call to
_alpm_log in such a case to make the culprits more easily visible.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We accept package_foo() in non-split packages, because it's easier to
switch to/from a split package just by removing a pkgname element. But
it makes no sense to have both in one PKGBUILD.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When doing "pacman -Fs", show the "(groupname)"
message just like "pacman -Ss".
And refactor group printing to its own function.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Due to a copy-paste error when initially implementing this, it actually
uses a duplicate function name, usually resulting in lint_pkgbuild
overwriting the function definition.
Then the PKGBUILD lint gets run twice, one time before the PKGBUILD is
even sourced -- to potentially surprising results, like erroring out on
a pre-existing shell definition that doesn't match our expectations.
Seen in the wild with lint_config triggering an error for
'declare -x arch="foo"'
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#60106
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We don't need to translate the "Copyright YEAR AUTHOR" part, no part of
it should probably be translated and it definitely shouldn't turn every
single license terms notice into a separate translation just because the
author/year is different.
Fixes FS#58452
Also consistently add a blank line after the copyright and before the
license terms.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reverts commit 9cdfd18739cc4b0e2b2efeb9a92a3ea612c8505f.
We've never documented whirlpoolsums support in the manpage and no one
really seems to have realized we support it, let alone use it -- except
for a few parabola packages, being the contributor's motivation for
adding support.
The problem is that for two years the code has been broken. In commit
577701250d645d1fc1a505cde34aedbeb3208ea5 we moved to coreutils to
provide checksum commands, rather than openssl, but there is no
whirlpoolsums binary.
Properly fixing this would require re-adding a dependency on openssl,
independent of the libalpm crypto backend -- which defeats the purpose
of moving to coreutils in the general case. nettle-hash does not provide
a whirlpool algorithm any more than it does base64 (the original reason
for moving to coreutils).
Therefore, we should just drop support for this again.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It's most likely a case where output is being captured, so we shouldn't
be interleaving status messages with function output regardless. Setting
the pkgver() status message (the one time we use it in a subshell)
separately also makes it safe to change whether message.sh functions write
to stdout or stderr.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
`run_function_safe pkgver` is evaluated in a subshell and therefore does
not abort when it should. Explicitly check the return outside of the
subshell and abort if necessary.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Both run_function and run_function_safe will save and restore `shopt -p`
but the former is only called from the latter. It makes sense to save
this as part of a "safe" runner, so let's just do it in one place, there
where we save and restore everything else too.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When doing "pacman -Fs", show the "[installed: version]"
message just like "pacman -Ss".
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use implicit dependency rules to translate asciidoc inputs to HTML and
manpage outputs. We should only have to declare explicit dependencies
for odd cases, e.g. the PKGBUILD documentation has an additional include
file and isn't a 1:1 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We don't use these.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When re-running makepkg for fakeroot, if `bash -x makepkg` was used this
is lost. Fix by encoding the current set of options explicitly in the
invocation, both for makepkg and for the wrapper used to test scripts
inside the source tree.
Also change to use ${BASH_SOURCE[0]} instead of $0 as the latter can be
anything the parent process wants, while the former is explicitly set by
bash itself to the filepath of the script.
See http://mywiki.wooledge.org/BashFAQ/028
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pull out the expected=y/n check into a separate function and make use of
the fact we can just prepend the fallback arrays to get the same result.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that we require bash 4.4 this is "more correct" than analyzing the
output of declare -p to see if it compares favorably with -a.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is required in order to use declare -g and ${var@a}
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function
was moved out of fakeroot, and thus out of the create_package loop. This
meant that if package signing failed, it was no longer possible to tell
which package it failed on by checking which package creation is
currently running. Successful signing attempts do not have this problem
as we already printed the name of the signature file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add a case for curl error 'Could not resolve host'.
An attempt to fix FS#48285.
Signed-off-by: Michael Straube <straubem@gmx.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It is desirable to have 'a-post.hook' ordered after 'a.hook'. For this,
it is needed to ignore the suffix when sorting.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This causes package_$pkgname() to be preferred over package() in the
non-split case, but the behavior if both functions exist was
undocumented anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds opt-in lz4 compression of *pkg.tar files with makepkg.
This is nice to have as an option for very fast compression
and is already installed with libarchive.
Signed-off-by: Alex Butler<alexheretic@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Default to the standard completionsdir, which is lazy-loaded, rather
than hardcoding the compatdir which is not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The biggest issue is directly supplying the data within the format
string which can result in misinterpreting formatter sequences if a
printed variable contains an "%" in it. This character is currently
permitted in the pkgver field, though not in the pkgname. Also
pacman/libalpm itself has much looser limitations and this can appear
anywhere at all if a package was created by some other program.
For the package "iambroke-1%s-1-any.pkg.tar.xz", installed in the build
environment, the result is:
-> Generating .BUILDINFO file...
awk: cmd. line:3: (FILENAME=- FNR=1085) fatal: not enough arguments to satisfy format string
`-1%s-1'
^ ran out for this one
Followed by a .BUILDINFO which contains an LC_ALL=C sorted list of
$pkgname-${epoch:+$epoch:}$pkgver-$pkgrel-$arch ending in:
installed = iambroke
Which is cut short, then fails to list the succeeding packages. The
package itself successfully builds.
It's also unnecessary to save the output of pacman -Qq in order to get the
information for pacman -Qi, since the latter will, just like the former,
return information for all installed packages if not given a package
name(s).
While I am at it, pipe this directly to awk rather than keeping a copy
in an unnecessary local variable. This is slightly more efficient in
addition to preventing the <<< herestring from re-interpreting the
content of "$pkginfos" in ways that don't really matter for our usage.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The pacman --overwrite operation currently expects a path without
the root prefix specified. This is unexpected, particularly
given our conflict error message reports the path with the root
prefix included.
This patch allows libalpm to overwrite files with the root prefix
specified.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This change was introduced to prevent entries like depends=('foo>').
However, it had the unintended side effect of causing a number of
working PKGBUILDs to fail to build. This happened when a PKGBUILD
defined one variable through calling a "complex" statement within the
PKGBUILD's package function (e.g. a function or evaluating in a
subshell), then used it to define the package metadata variable.
extract_function_variable() cannot execute the package function in order
to retrieve this information, so it performs a simple grep + eval instead
and in the process misses the contextual awareness of running within the
package function.
While not catching these "issues" can result in incorrect SRCINFO, the
resulting packages are fine. Stop aborting on the common case where the
pkgver of a dependency is dynamically set during the package function
until the large number of broken PKGBUILDs are fixed, and the
restrictions of the PKGBUILD format are documented.
"Fixes" FS#58776
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add missing sha224 sums to makepkg.conf and it's man page.
Signed-off-by: Michael Straube <michael.straube@posteo.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Ini-style configuration formats are all over the place. So are we, for
that matter, as we switched how we treated middle-of-line comments in
commit 8a19c4a78251c5e34ecf508a65d943ca2dc833c7 -- namely, they're not
comments anymore. This is surprising to users, who report bugs because
it used to work, but what's more surprising is that the only
"documentation" for the type of comments users can be expected to use,
is by guessing from our example pacman.conf and maybe discovering
unreliable easter eggs.
Fixes FS#58809
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The use of --sysroot in the real world has flagged some issues that need
addressing. Undeprecate --root for now.
This reverts commit a278356f75866f89232e3e6230bbf9fb2dc1893c.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
