diff options
Diffstat (limited to 'acinclude.m4')
| -rw-r--r-- | acinclude.m4 | 4939 |
1 files changed, 65 insertions, 4874 deletions
diff --git a/acinclude.m4 b/acinclude.m4 index 1524a3dd..7309d731 100644 --- a/acinclude.m4 +++ b/acinclude.m4 @@ -1,4876 +1,4 @@ dnl acinclude.m4 - configure macros used by pacman and libalpm -dnl The majority of this file is the libtool macros we use, kept here so -dnl we are not dependent on the host-system version of the macros. There -dnl are some pacman/libalpm specific macros at the end of the file as well. - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 -## Free Software Foundation, Inc. -## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -## -## This file is free software; the Free Software Foundation gives -## unlimited permission to copy and/or distribute it, with or without -## modifications, as long as this notice is preserved. - -# serial 51 AC_PROG_LIBTOOL - - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL - - -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl - -AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl -dnl - -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR - -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - -# Global variables: -default_ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" - -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC - fi - ;; -esac - -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) - -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default - -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP - - -# _LT_AC_SYS_COMPILER -# ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -AC_DEFUN([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -AC_DEFUN([_LT_COMPILER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -AC_DEFUN([_LT_LINKER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm conftest* -])# _LT_LINKER_BOILERPLATE - - -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -[$]* -EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH - - -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) LD="${LD-ld} -64" ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) -esac - -need_locks="$enable_libtool_lock" - -])# _LT_AC_LOCK - - -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) -AC_CACHE_CHECK([$1], [$2], - [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $rm conftest* -]) - -if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) -else - ifelse([$6], , :, [$6]) -fi -])# AC_LIBTOOL_COMPILER_OPTION - - -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $rm conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) -else - ifelse([$5], , :, [$5]) -fi -])# AC_LIBTOOL_LINKER_OPTION - - -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN - - -# _LT_AC_CHECK_DLFCN -# ------------------ -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN - - -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# --------------------------------------------------------------------- -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -[#line __oline__ "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -#ifdef __cplusplus -extern "C" void exit (int); -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - exit (status); -}] -EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF - - -# AC_LIBTOOL_DLOPEN_SELF -# ---------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -])# AC_LIBTOOL_DLOPEN_SELF - - -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* -]) -])# AC_LIBTOOL_PROG_CC_C_O - - -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- -# Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl - -hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS - - -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR - - -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- -# Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH - - -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -])# AC_LIBTOOL_SYS_LIB_STRIP - - -# AC_LIBTOOL_SYS_DYNAMIC_LINKER -# ----------------------------- -# PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -m4_if($1,[],[ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix4* | aix5*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi -fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 DLLs -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -# set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - - -# AC_LIBTOOL_PICMODE([MODE]) -# -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- -# find a file program which can recognize shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -])# AC_PATH_TOOL_PREFIX - - -# AC_PATH_MAGIC -# ------------- -# find a file program which can recognize a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# AC_PATH_MAGIC - - -# AC_PROG_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -])# AC_PROG_LD - - -# AC_PROG_LD_GNU -# -------------- -AC_DEFUN([AC_PROG_LD_GNU], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# AC_PROG_LD_GNU - - -# AC_PROG_LD_RELOAD_FLAG -# ---------------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -])# AC_PROG_LD_RELOAD_FLAG - - -# AC_DEPLIBS_CHECK_METHOD -# ----------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognize dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix4* | aix5*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[[45]]*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -nto-qnx*) - lt_cv_deplibs_check_method=unknown - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD - - -# AC_PROG_NM -# ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm -fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# it is assumed to be `libltdl'. LIBLTDL will be prefixed with -# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' -# (note the single quotes!). If your package is not flat and you're not -# using automake, define top_builddir and top_srcdir appropriately in -# the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# and an installed libltdl is not found, it is assumed to be `libltdl'. -# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and top_srcdir -# appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_RC -# ------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF - -# Report which library types will actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix4* | aix5*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext <<EOF -int a; -void foo (void) { a = 0; } -EOF -]) -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then - _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then - _LT_AC_TAGVAR(predep_objects, $1)="$p" - else - _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then - _LT_AC_TAGVAR(postdep_objects, $1)="$p" - else - _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$rm -f confest.$objext - -case " $_LT_AC_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac -])# AC_LIBTOOL_POSTDEP_PREDEP - - -# AC_LIBTOOL_LANG_RC_CONFIG -# ------------------------- -# Ensure that the configuration vars for the Windows resource compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) -AC_DEFUN([_LT_AC_LANG_RC_CONFIG], -[AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_RC_CONFIG - - -# AC_LIBTOOL_CONFIG([TAGNAME]) -# ---------------------------- -# If TAGNAME is not passed, then create an initial libtool script -# with a default configuration from the untagged config vars. Otherwise -# add code to config.status for appending the configuration named by -# TAGNAME from the matching tagged config vars. -AC_DEFUN([AC_LIBTOOL_CONFIG], -[# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - _LT_AC_TAGVAR(compiler, $1) \ - _LT_AC_TAGVAR(CC, $1) \ - _LT_AC_TAGVAR(LD, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ - _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ - _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ - _LT_AC_TAGVAR(old_archive_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ - _LT_AC_TAGVAR(predep_objects, $1) \ - _LT_AC_TAGVAR(postdep_objects, $1) \ - _LT_AC_TAGVAR(predeps, $1) \ - _LT_AC_TAGVAR(postdeps, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ - _LT_AC_TAGVAR(archive_cmds, $1) \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ - _LT_AC_TAGVAR(postinstall_cmds, $1) \ - _LT_AC_TAGVAR(postuninstall_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ - _LT_AC_TAGVAR(allow_undefined_flag, $1) \ - _LT_AC_TAGVAR(no_undefined_flag, $1) \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ - _LT_AC_TAGVAR(hardcode_automatic, $1) \ - _LT_AC_TAGVAR(module_cmds, $1) \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) \ - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ - _LT_AC_TAGVAR(fix_srcfile_path, $1) \ - _LT_AC_TAGVAR(exclude_expsyms, $1) \ - _LT_AC_TAGVAR(include_expsyms, $1); do - - case $var in - _LT_AC_TAGVAR(old_archive_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ - _LT_AC_TAGVAR(archive_cmds, $1) | \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\[$]0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` - ;; - esac - -ifelse([$1], [], - [cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - AC_MSG_NOTICE([creating $ofile])], - [cfgfile="$ofile"]) - - cat <<__EOF__ >> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl - -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI - - -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([LT_AC_PROG_SED]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) # Its linker distinguishes data from code symbols - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[[ABCDGIRSTW]]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Try without a prefix undercore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat <<EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' - - cat <<EOF >> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[[]] = -{ -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} -}; - -#ifdef __cplusplus -} -#endif -EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -f conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE - - -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; - esac - ;; - - osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC])" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) -]) - - -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ -# See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - _LT_CC_BASENAME([$compiler]) - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix3* | aix4* | aix5*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix[[3-9]]*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix4* | aix5*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac -])# AC_LIBTOOL_PROG_LD_SHLIBS - - -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include <windows.h> -# #undef WIN32_LEAN_AND_MEAN -# #include <stdio.h> -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include <cygwin/cygwin_dll.h> -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C - - -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) - - -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) - -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) - -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) -]) - - -# Cheap backport of AS_EXECUTABLE_P and required macros -# from Autoconf 2.59; we should not use $as_executable_p directly. - -# _AS_TEST_PREPARE -# ---------------- -m4_ifndef([_AS_TEST_PREPARE], -[m4_defun([_AS_TEST_PREPARE], -[if test -x / >/dev/null 2>&1; then - as_executable_p='test -x' -else - as_executable_p='test -f' -fi -])])# _AS_TEST_PREPARE - -# AS_EXECUTABLE_P -# --------------- -# Check whether a file is executable. -m4_ifndef([AS_EXECUTABLE_P], -[m4_defun([AS_EXECUTABLE_P], -[AS_REQUIRE([_AS_TEST_PREPARE])dnl -$as_executable_p $1[]dnl -])])# AS_EXECUTABLE_P - -############################################################ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # -############################################################ -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -]) - - dnl Add some custom macros for pacman and libalpm dnl GCC_STACK_PROTECT_LIB @@ -4910,6 +38,29 @@ AC_DEFUN([GCC_STACK_PROTECT_CC],[ fi ]) +dnl GCC_FORTIFY_SOURCE_CC +dnl checks -D_FORTIFY_SOURCE with the C compiler, if it exists then updates +dnl CFLAGS +AC_DEFUN([GCC_FORTIFY_SOURCE_CC],[ + AC_LANG_ASSERT(C) + if test "X$CC" != "X"; then + AC_MSG_CHECKING(for FORTIFY_SOURCE support) + AC_TRY_COMPILE([#include <features.h>], [ + int main() { + #if !(__GNUC_PREREQ (4, 1) ) + #error No FORTIFY_SOURCE support + #endif + return 0; + } + ], [ + AC_MSG_RESULT(yes) + CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=2" + ], [ + AC_MSG_RESULT(no) + ]) + fi +]) + dnl GCC_VISIBILITY_CC dnl checks -fvisibility=internal with the C compiler, if it exists then dnl defines ENABLE_VISIBILITY_CC in both configure script and Makefiles @@ -4926,7 +77,7 @@ AC_DEFUN([GCC_VISIBILITY_CC],[ if test $visibility_cv_cc = yes; then AC_DEFINE([ENABLE_VISIBILITY_CC], 1, [Define if symbol visibility C support is enabled.]) fi - AM_CONDITIONAL([ENABLE_VISIBILITY_CC], test "x$visibility_cv_cc" = "xyes") + AM_CONDITIONAL([ENABLE_VISIBILITY_CC], test "x$visibility_cv_cc" = "xyes") fi ]) @@ -4946,7 +97,47 @@ AC_DEFUN([GCC_GNU89_INLINE_CC],[ if test $gnu89_inline_cv_cc = yes; then AC_DEFINE([ENABLE_GNU89_INLINE_CC], 1, [Define if gnu89 inlining semantics should be used.]) fi - AM_CONDITIONAL([ENABLE_GNU89_INLINE_CC], test "x$gnu89_inline_cv_cc" = "xyes") + AM_CONDITIONAL([ENABLE_GNU89_INLINE_CC], test "x$gnu89_inline_cv_cc" = "xyes") fi ]) +dnl Checks for getmntinfo and determines whether it uses statfs or statvfs +AC_DEFUN([FS_STATS_TYPE], + [AC_CACHE_CHECK([filesystem statistics type], fs_stats_cv_type, + [AC_CHECK_FUNC(getmntinfo, + [AC_COMPILE_IFELSE( + [AC_LANG_PROGRAM([[ +# include <sys/param.h> +# include <sys/mount.h> +#if HAVE_SYS_UCRED_H +#include <sys/ucred.h> +#endif +extern int getmntinfo (struct statfs **, int); +]], + [])], + [fs_stats_cv_type="struct statfs"], + [fs_stats_cv_type="struct statvfs"])], + [AC_CHECK_FUNC(getmntent, + [fs_stats_cv_type="struct statvfs"])] + )] + ) + AC_DEFINE_UNQUOTED(FSSTATSTYPE, [$fs_stats_cv_type], + [Defined as the filesystem stats type ('statvfs' or 'statfs')]) +]) + +dnl Checks for PATH_MAX and defines it if not present +AC_DEFUN([PATH_MAX_DEFINED], + [AC_CACHE_CHECK([PATH_MAX defined], path_max_cv_defined, + [AC_EGREP_CPP(yes, [[ +#include <limits.h> +#if defined(PATH_MAX) +yes +#endif +]], + [path_max_cv_defined=yes], + [path_max_cv_defined=no])] + ) + if test $path_max_cv_defined = no; then + AC_DEFINE([PATH_MAX], 4096, [Define if PATH_MAX is undefined by limits.h.]) + fi +]) |