summaryrefslogtreecommitdiff
path: root/bin
diff options
context:
space:
mode:
Diffstat (limited to 'bin')
-rwxr-xr-xbin/check-opcodes86
-rwxr-xr-xbin/opcode46
2 files changed, 81 insertions, 51 deletions
diff --git a/bin/check-opcodes b/bin/check-opcodes
index bd96cc6..b8ad89c 100755
--- a/bin/check-opcodes
+++ b/bin/check-opcodes
@@ -2,32 +2,42 @@
# shellcheck disable=SC2086
-# shellcheck source=conf/default.conf
+# shellcheck source=../conf/default.conf
. "${0%/*}/../conf/default.conf"
usage( ) {
>&2 cat <<EOF
-check_opcodes: [ -a <arch> ] <package>
+check_opcodes: [options] [ -a <arch> ] <package>
possible optons:
-h|--help: Show this help page
- -v|--verbose: Verbose output
-a|--architecture: architecture family to check against, one of
- i486, i686, pentium4
+ i486, i686, pentium3 (meaning target architecture
+ the package should be runnable on)
+ -v|--verbose: Verbose output, print result of check for logs
+ -d|--debug: Debug output, used for development and testing
EOF
exit 1
}
VERBOSE=0
+DEBUG=0
EXIT_CODE=0
-log( ) {
+
+verbose( ) {
if test $VERBOSE = 1; then
echo "$@"
fi
}
+debug( ) {
+ if test $DEBUG = 1; then
+ echo "$@"
+ fi
+}
+
err( ) {
echo "ERROR: $*"
EXIT_CODE=1
@@ -38,7 +48,7 @@ trap 'rm -rf --one-file-system "${tmp_dir:?}"' EXIT
ARCH=i686
-while getopts ":va:h-:" opt; do
+while getopts ":vda:h-:" opt; do
case $opt in
-)
case "$OPTARG" in
@@ -48,6 +58,9 @@ while getopts ":va:h-:" opt; do
verbose)
VERBOSE=1
;;
+ debug)
+ DEBUG=1
+ ;;
*)
echo "ERROR: Invalid option: --$OPTARG" >&2
usage
@@ -60,6 +73,9 @@ while getopts ":va:h-:" opt; do
v)
VERBOSE=1
;;
+ d)
+ DEBUG=1
+ ;;
a)
ARCH=$OPTARG
;;
@@ -83,29 +99,42 @@ fi
OPCODE_ARGS=""
case $ARCH in
i486)
- OPCODE_ARGS='-r -a 486 -v'
+ OPCODE_ARGS='-r -a 386 -v'
;;
- i686)
- OPCODE_ARGS='-s MMX -s SSE -s SSE2'
+ i686)
+ OPCODE_ARGS='-s MMX -s SSE'
;;
- pentium4)
- OPCODE_ARGS='-s SSE3 -s SSSE3 -s AVX'
+ pentium3)
+ OPCODE_ARGS='-s SSE2 -s SSE3'
;;
- *)
+ *)
echo "ERROR: architecture must currently be one of i486 and i686" >&2
usage
exit 1
esac
-log "Checking for architecture: $ARCH ($OPCODE_ARGS)"
+debug "Unpacking $PACKAGE to $tmp_dir.."
bsdtar --no-fflags -x -C $tmp_dir -f $PACKAGE
+debug "Checking for architecture: $ARCH ($OPCODE_ARGS).."
+
# shellcheck disable=SC2044
-for absfile in $(find $tmp_dir -regextype grep -regex '.*\.so\(\.[0-9.]\+\)\?' -type f); do
- file=$(basename $absfile)
- log "Checking shared library: $file"
- readelf -a $absfile > $tmp_dir/$file.elf
- objdump -f $absfile > $tmp_dir/$file.objdump
+for absfile in $(find $tmp_dir \( -regextype grep -regex '.*\.so\(\.[0-9.]\+\)\?' -type f \) -o \( -executable -type f \) ); do
+ file=$(basename $absfile)
+ relfile=${absfile#$tmp_dir}
+ debug "Checking file: $relfile"
+ set +e
+ readelf -a $absfile > $tmp_dir/$file.elf 2>/dev/null
+ if test $? != 0; then
+ debug "readelf failed, ignoring file"
+ continue
+ fi
+ objdump -f $absfile > $tmp_dir/$file.objdump 2>/dev/null
+ if test $? != 0; then
+ debug "objdump failed, ignoring file"
+ continue
+ fi
+ set -e
file $absfile > $tmp_dir/$file.file
arch=$(grep ^architecture $tmp_dir/$file.objdump | sed 's/^architecture: //g' | cut -f 1 -d ,)
@@ -120,7 +149,7 @@ for absfile in $(find $tmp_dir -regextype grep -regex '.*\.so\(\.[0-9.]\+\)\?' -
arch='unknown'
;;
esac
- log " Objdump architecture: $arch"
+ debug " Objdump architecture: $arch"
archelf=$(grep '^ \+Class' $tmp_dir/$file.elf | cut -f 2 -d : | tr -d ' ')
case $archelf in
@@ -134,14 +163,14 @@ for absfile in $(find $tmp_dir -regextype grep -regex '.*\.so\(\.[0-9.]\+\)\?' -
archelf='unknown'
;;
esac
- log " Readelf architecture: $archelf"
+ debug " Readelf architecture: $archelf"
if test $arch != $archelf; then
- err "$file ambigous architecture information (objdump: $arch, ELF: $archelf)"
+ err "ERROR: $file ambigous architecture information (objdump: $arch, ELF: $archelf)"
fi
if test $arch = "x86_64"; then
- err "$file is a 64-bit library!"
+ err "ERROR: $file is a 64-bit library!"
continue
fi
@@ -150,18 +179,21 @@ for absfile in $(find $tmp_dir -regextype grep -regex '.*\.so\(\.[0-9.]\+\)\?' -
if test $bad_opcodes != 0; then
case $ARCH in
i486)
- err "$file is not built for plain i486 opcodes"
+ err "$relfile is not built for plain i486 opcodes"
;;
i686)
- err "$file contains MMX, SSE or SSE2 opcodes"
+ err "$relfile contains MMX, SSE or newer opcodes"
;;
- pentium4)
- err "$file contains SSE3 or newer opcodes"
+ pentium3)
+ err "$relfile contains SSE2 or newer opcodes"
;;
esac
+ if test $DEBUG = 1; then
+ ${base_dir}/bin/opcode $OPCODE_ARGS -B 2 -A 2 < $tmp_dir/$file.asm
+ fi
else
if test $VERBOSE = 1; then
- log "$file fullfills architecture constraint for $ARCH"
+ verbose "OK: $relfile fullfills architecture constraint for $ARCH"
fi
fi
diff --git a/bin/opcode b/bin/opcode
index 8840e97..544c763 100755
--- a/bin/opcode
+++ b/bin/opcode
@@ -25,8 +25,8 @@
# * Remove all line in Opcode_ARM_THUMB
# return values
-# shellcheck disable=SC2001,SC2034,SC2086
+# return values
EXIT_FOUND=0
EXIT_NOT_FOUND=1
EXIT_USAGE=2
@@ -45,7 +45,6 @@ Line_Numbers=false
Leading_Context=0
Trailing_Context=0
-# shellcheck source=lib/opcode_list
source "${0%/*}/../lib/opcode_list" # include opcodes from a separate file
# GAS-specific opcodes (unofficial names) belonging to the x64 instruction set.
@@ -166,7 +165,7 @@ usage() {
echo "The script uses Intel opcode syntax. When used in conjunction with objdump, \`-M intel' must be set in order to prevent opcode translation using AT&T syntax."
echo
echo "BE AWARE THAT THE LIST OF KNOWN INSTRUCTIONS OR INSTRUCTIONS SUPPORTED BY PARTICULAR ARCHITECTURES (ESPECIALLY AMD'S) IS ONLY TENTATIVE AND MAY CONTAIN MISTAKES!"
- kill -TRAP "$TOP_PID"
+ kill -TRAP $TOP_PID
}
list_contains() { # Returns 0 if $2 is in array $1, 1 otherwise.
@@ -179,25 +178,25 @@ list_contains() { # Returns 0 if $2 is in array $1, 1 otherwise.
build_instruction_set() { # $1 = enum { Arch, InstSet }, $2 = architecture or instruction set as obtained using -L or -l, $3 = "architecture"/"instruction set" to be used in error message
local e
- list_contains "$(eval echo \\\$${1}List)" "$2" || (echo "$2 is not a valid $3."; usage) # Test if the architecture/instruction set is valid.
- if [ -n "$(eval echo \\\$${1}_${2})" ]; then # Add the instruction set(s) if any.
- for e in $(eval echo \\\$${1}_${2}); do # Skip duplicates.
+ list_contains "`eval echo \\\$${1}List`" "$2" || (echo "$2 is not a valid $3."; usage) # Test if the architecture/instruction set is valid.
+ if [ -n "`eval echo \\\$${1}_${2}`" ]; then # Add the instruction set(s) if any.
+ for e in `eval echo \\\$${1}_${2}`; do # Skip duplicates.
list_contains "$InstSet_Base" $e || InstSet_Base="$e $InstSet_Base"
done
fi
if [ $Recursive = true ]; then
- for a in $(eval echo \\\$${1}Dep_$2); do
+ for a in `eval echo \\\$${1}Dep_$2`; do
build_instruction_set $1 $a "$3"
done
fi
- InstSet_Base=$(echo $InstSet_Base | sed 's/$ *//') # Remove trailing space.
+ InstSet_Base="`echo $InstSet_Base | sed 's/$ *//'`" # Remove trailing space.
}
-trap 'exit $EXIT_USAGE' TRAP # Allow usage() function to abort script execution.
+trap "exit $EXIT_USAGE" TRAP # Allow usage() function to abort script execution.
export TOP_PID=$$ # PID of executing process.
# Parse command line arguments.
-while getopts ":ra:s:LliIcf:d:D:CvVm:nB:A:h" o; do
+while getopts ":ra:s:LliIcf:Fd:D:CvVm:nB:A:h" o; do
case $o in
r) Recursive=true ;;
a) build_instruction_set Arch "$OPTARG" "architecture" ;;
@@ -209,19 +208,19 @@ while getopts ":ra:s:LliIcf:d:D:CvVm:nB:A:h" o; do
echo $InstSet_Base
exit $EXIT_USAGE
else
- echo -e "No instruction set or architecture set.\\n"
+ echo -e "No instruction set or architecture set.\n"
usage
fi
;;
I)
if [ -n "$InstSet_Base" ]; then
for s in $InstSet_Base; do
- echo -ne "\\e[31;1m$s:\\e[0m "
+ echo -ne "\e[31;1m$s:\e[0m "
eval echo "\$Opcode_$s"
done
exit $EXIT_USAGE
else
- echo -e "No instruction set or architecture set.\\n"
+ echo -e "No instruction set or architecture set.\n"
usage
fi
;;
@@ -230,12 +229,12 @@ while getopts ":ra:s:LliIcf:d:D:CvVm:nB:A:h" o; do
# Unlike architectures, instruction sets are disjoint.
Found=false
for s in $InstSetList; do
- for b in $(eval echo \\\$InstSet_$s); do
+ for b in `eval echo \\\$InstSet_$s`; do
Found_In_Base=false
- for i in $(eval echo \\\$Opcode_$b); do
+ for i in `eval echo \\\$Opcode_$b`; do
if [[ "$i" =~ ^$OPTARG$ ]]; then
- $Found_In_Base || echo -ne "Instruction set \\e[33;1m$s\\e[0m (base instruction set \\e[32;1m$b\\e[0m):"
- echo -ne " \\e[31;1m$i\\e[0m"
+ $Found_In_Base || echo -ne "Instruction set \e[33;1m$s\e[0m (base instruction set \e[32;1m$b\e[0m):"
+ echo -ne " \e[31;1m$i\e[0m"
Found_In_Base=true
Found=true
fi
@@ -244,7 +243,7 @@ while getopts ":ra:s:LliIcf:d:D:CvVm:nB:A:h" o; do
done
done
if [ $Found = false ]; then
- echo -e "Operation code \\e[31;1m$OPTARG\\e[0m has not been found in the database of known instructions." \
+ echo -e "Operation code \e[31;1m$OPTARG\e[0m has not been found in the database of known instructions." \
"Perhaps it is translated using other than Intel syntax. If obtained from objdump, check if the \`-M intel' flag is set." \
"Be aware that the search is case sensitive by default (you may use the -C flag, otherwise only lower case opcodes are accepted)."
exit $EXIT_NOT_FOUND
@@ -263,13 +262,13 @@ while getopts ":ra:s:LliIcf:d:D:CvVm:nB:A:h" o; do
A) Trailing_Context=$OPTARG ;;
h) usage ;;
\?)
- echo -e "Unknown option: -$OPTARG\\n"
+ echo -e "Unknown option: -$OPTARG\n"
usage
;;
esac
done
shift $((OPTIND-1))
-[ -n "$1" ] && echo -e "Unknown command line parameter: $1\\n" && usage
+[ -n "$1" ] && echo -e "Unknown command line parameter: $1\n" && usage
[ -z "$InstSet_Base" ] && usage
# Create list of grep parameters.
@@ -283,13 +282,12 @@ Grep_Params="--color=auto -B $Leading_Context -A $Trailing_Context"
# Build regular expression for use in grep.
RegEx=""
for s in $InstSet_Base; do
- eval 'RegEx="$RegEx $Opcode_'"$s"'"'
+ eval RegEx=\"$RegEx \$Opcode_$s\"
done
# Add leading and trailing opcode separators to prevent false positives.
-RegEx="$Leading_Separator$(echo $RegEx | sed "s/ /$(echo "$Trailing_Separator"|sed 's/[\/&]/\\\&/g')|$(echo "$Leading_Separator"|sed 's/[\/&]/\\\&/g')/g")$Trailing_Separator"
+RegEx="$Leading_Separator`echo $RegEx | sed "s/ /$(echo "$Trailing_Separator"|sed 's/[\/&]/\\\&/g')|$(echo "$Leading_Separator"|sed 's/[\/&]/\\\&/g')/g"`$Trailing_Separator"
-[ $Verbose = true ] && [ $Count_Matching = false ] && RegEx="$RegEx|\$"
+[ $Verbose = true -a $Count_Matching = false ] && RegEx="$RegEx|\$"
-# shellcheck disable=SC2086
# The actual search.
grep $Grep_Params -E "$RegEx" && exit $EXIT_FOUND || exit $EXIT_NOT_FOUND