| Age | Commit message (Collapse) | Author |
|---|
|
* This scripts, now runs only in x86_64.
* build.sh does not require arguments to run (no more build, clean, purge).
* /usr/share split is not done anymore: there are some differences between two arches. (ISO size +60MiB)
* /usr/lib/modules split is not done anymore: this was never enabled officially in aitab.
Tested and works fine. Maybe some small cosmetic changes needed.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Simplify code path.
Previously in "dual" mode is executed when arch=i686, i686 was used as primary source.
This does not change current behaviour of building "dual" on x86_64.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Using a separate shell script to customize live-enviroment,
makes much more readable code.
Move all thing except:
* Need network access (name resolving).
* Need access to some file outside chroot.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
curl is a dependency for pacman
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
-f is not needed anymore, disable explicitly default getty service
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
initscripts/sysvinit are not part from {base} anymore, systemd* is now in {base}.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Only use groups that wont allow damaging the host system by accident.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
* pacman-init already pulls in services it depends on
* the multi-user.target is the default
* do not rename the getty service so tools like systemd-delta still work
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
As we did with initscripts, run dhcpcd on all devices and not just eth0.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
A live system should never alter the host system in any way. This includes setting the bios clock.
E.g. if the user runs his system in local time we would do the wrong thing here.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Increase size to a safe 31M, (currently we have 400K free since latest changes)
* Also set a filesystem label, can be useful for future usage...
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
USB and add refind-efi-x86_64 to ISO
|
|
Avoid issues on shutdown (and during normal usage if network settings changed)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This installs zsh and sets it as default for root and the arch user.
grml-zsh-config is installed as a userfriendly default configuration.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
|
|
* We use a rc.conf file loser to the upstream default.
* Use the recommend config files to setup hostname, locale, timezone and console
EDIT (Gerardo): Add empty FONT= and use ln -f for localtime
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Download and add the current installation guide as plain text.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
initialization
This was made originally using directly pacman-key file,
convert it in a patch form, to be more easy to track it.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Although everything should be fine now (due to the /lib -> /usr/lib symlink),
adjust everything to the proper path.
Edited (Gerardo): Also rename function name and image name to be consisten.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This ensures we do not pick up any testing or third party repos from the host.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Download and add package signatures to the repository database
* Support any number of configured package caches
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Makes an efiboot.img (FAT16) for "El Torito" (additional).
Under an EFI-system, implies that this .ISO works only if is used
as "CD-ROM/DVD-ROM" not in ISO-HYBRID-MBR mode.
If you want, an EFI-ready USB-key, just unpack this "<ISO>/EFI/efiboot.img" (FAT16) to
"<USB-key-FAT-formatted>/EFI" then copy "<ISO>/arch" and setup the filesystem label.
An aditional EFI shell is provided with an startup script for automatic booting
until EFI_STUB supports "linux.conf" to pass boot parms to kernel.
Anyway I think that is a good idea to keep this shell, so can customize boot parms,
or for doing other tasks on systems without an EFI-shell.
RFCv1: Initial efiboot.img build with vmlinuz.efi (Linux with EFI_STUB enabled)
and archiso.img (initramfs).
RFCv2: Use an startup.nsh with EFI-Shell 2.0 (generated from build.sh) for automatic boot.
RFCv3: Use and older EFI-Shell 1.0 instead of 2.0, since not all UEFI-systems
are compatible with 2.3+ specs.
RFCv4: The script "startup.nsh" improved by Keshav P R, using a for-loop
(see notes below from original commit), now that has more than 1-line,
I moved it to an independent file and is parsed by build.sh.
----
About startup.nsh:
Author: Keshav P R <the.ridikulus.rat@gmail.com>
Date: Thu Apr 5 10:33:20 2012 +0530
[configs/releng] Search in all existing UEFI FS mountpoints for archiso efistub kernel file
There is no guarantee that the efistub kernel will always be in fs0:
(similar to the case inside linux OS where the sda, sdb confusion exists,
hence the need for UUIDs), especially when USB (instead os CD/ISO) is
used for booting.
Hence loop through all possible fs mountpoints (in UEFI) in startup.nsh
and try to launch the first mountpoint that contains the archiso files.
Cd's into the fs%m:\EFI\archiso directory also may remove future issues
with efistub's linux.conf where the efistub might have problems
identifying the directory from which the kernel was launched.
Also add an helpful echo message showing the user the UEFI PATH to the
archiso kernel file being launched by startup.nsh .
Hopefully this should work in both CD and USB. Tested in Tianocore
UDK/EDK2 DuetPkg X64 UEFI 2.3.1 firmware with EdkShellBinPkg's Shell.
----
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
They are present by mistake.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* For installed packages on live-enviroment use mkarchiso pkglist command.
* For packages in [core] repo in core.iso, make a list of them during repo generation.
It uses the same format like done by pkglist command: <repo>/<package>-<version>
(anyway repo is always core in this case).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Now we can do this, since nobody touches this file before this step.
(previously by mkarchroot)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This mode allow to build all 6 ISOs in just one step if build type is <all>.
So "build.sh build all all" -> (single-i686, single-x86_64, dual) X (netinstall, core).
Note that the <purge> command is executed between each build step to save space,
so do not use this mode if you want to keep all temporal files in work_dir.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This allow to execute build.sh in 32-bit-compat without using a chroot
and doing tricks.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Remove devtools dependency.
* Better control over what files are touched inside chroot (root-image).
Now: NONE :)
* Two new commands:
+ init: To install {base} group and other needed packages (syslinux for now)
+ run: If we want to run some command inside chroot
(mkinitcpio, locale-gen, useradd, etc etc...)
* Renamed command: "created" to "install", says much better what does.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Needs mkinitpcio >= 0.8.4
Next changes will be for mdadm and mkinitcpio-nfs-utils:
* /lib/initcpio/udev/11-dm-initramfs.rules
* /lib/initcpio/ipconfig , /lib/initcpio/nfsmount
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
|
|
* In that way, we have unified directory scheme among {pxe,sys,ext,iso}linux,
sharing the same directory structure and config files.
* Also enable IPAPPEND (will show a warning message about unknown directive in non-pxelinux before menu)
NEW:
* Rename syslinux*.cfg -> archiso*.cfg
* Now syslinux.cfg is only a "loadconfig" trick like we are doing for isolinux
* All paths are now relative to %INSTALL_DIR% ($archisobasedir) (Default: /arch/)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
It add support for using *.sfs images via NFS.
It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New boot parameters:
archiso_nfs_srv=IP:/path
Set the NFS IP and path. Accepts ${pxeserver} as IP.
archiso_nfs_opt= Sets NFS mount opts (comma separated)
Defaults to:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
:: Running Hook [archiso_pxe_common]
IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500
IP-Config: eth0 guessed broadcast address 192.168.0.255
IP-Config: eth0 guessed nameserver address 192.168.0.218
IP-Config: eth0 complete (from 192.168.0.218):
address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0
gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0
rootserver: 192.168.0.218 rootpath:
filename :
:: Running Hook [archiso_pxe_nbd]
:: Running Hook [archiso_pxe_curl]
:: Running Hook [archiso_pxe_nfs]
:: Mounting '192.168.0.77:/mnt/iso'
...
192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77)
...
My /etc/exports
/mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
|
|
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files.
The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it
(like in archiso_loop_mnt) in the ISO case, or just do a bind mount to
/run/archiso/bootmnt in the other case.
This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New bootparm:
* archiso_curl_url=(first form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form)
Use an absolute URL. Fetch the entire ISO
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form)
Use the as IP the same server where PXE reside. Fetch the entire ISO
* archiso_curl_url=(second form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form)
Use an absolute URL. Where unpacked (an example name) is a directory where
${archisobasedir} ("arch" by default) is located with all *.sfs.
This fetch only needed files.
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form)
Use the as IP the same server where PXE reside. Where unpacked (an example name)
is a directory where ${archisobasedir} ("arch" by default)
is located with all *.sfs. This fetch only needed files.
* curlspace_size= Set a size for a tmpfs filesystem where files are downloaded.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
One hook only setup the network device (archiso_pxe_common) the other
setup the NBD client (archiso_pxe_nbd).
New bootparam:
archiso_pxe_srv=IP
Allow to set an IP different from the PXE server.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Avoid issues with -b BASEDIR (*).
We became independent of the mkinitcpio version of the build environment.
(*) For example of a recent issue:
http://mailman.archlinux.org/pipermail/arch-projects/2011-November/002202.html
http://mailman.archlinux.org/pipermail/arch-projects/2011-November/002205.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
STATUS: Working (std boot, loop_mnt, pxe) with copytoram=[y|n].
NEEDS: initscript > 2011.07.3, mkinitcpio > 0.7.2, mkinitcpio-busybox > 1.18.5-1
Purpose: we need this for propertly unmount $cow_device,
used for persistent dm-snapshot devices.
This hook is based on work from Tom Gundersen[#1],
but adapted for archiso things (specially the shutdown script)
[#1] http://mailman.archlinux.org/pipermail/arch-projects/2011-July/001549.html
[#2] http://projects.archlinux.org/initscripts.git/commit/?id=1fa7b4b453e96533ae1db3630031285e5fc302b3
[#3] http://mailman.archlinux.org/pipermail/arch-projects/2011-August/001749.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Fix: FS#18959 - download_repos.sh does not report tcp timeouts and such
* Always use pacman cache. Previously pacman cache was used if package
already exists on it, now is also used to download pkg on it.
Finally copy all packages from cache with cp and make core.db.
* Using pacman, we can sure that package integrity is right.
* Always get a [core] package, in case of [testing] enabled.
* Now works when mirror is: Server = file:// ;)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
