| Age | Commit message (Collapse) | Author |
|---|
|
On machines with common graphics chipsets (radeon, intel, nvidia), enable
KMS early. Downloading images from a remote server can take time, better
view the status with a nice resolution.
|
|
Otherwise does not work.
22100 Nov 29 09:29 ./lib/libnss_dns-2.14.1.so
20 Nov 29 09:29 ./lib/libnss_dns.so.2 -> libnss_dns-2.14.1.so
46732 Nov 29 09:29 ./lib/libnss_files-2.14.1.so
22 Nov 29 09:29 ./lib/libnss_files.so.2 -> libnss_files-2.14.1.so
Looks like my test was made before introducing symlinks
and using directly libnss_dns-$VERSION.so.2 as libnss_dns.so.2.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
[ramfs /]# cat /etc/resolv.conf
nameserver 192.168.0.77
[ramfs /]# curl -O http://releng.archlinux.org/pxeboot/README
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1129 100 1129 0 0 2191 0 --:--:-- --:--:-- --:--:-- 4589
[ramfs /]#
Do not "add_binary /lib/libnss_dns.so.2", because will add libnss_dns-VERSION.so.2 as libnss_dns.so.2
Is not an issue will work (nobody links directly to VERSION), but is not nice.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
It add support for using *.sfs images via NFS.
It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New boot parameters:
archiso_nfs_srv=IP:/path
Set the NFS IP and path. Accepts ${pxeserver} as IP.
archiso_nfs_opt= Sets NFS mount opts (comma separated)
Defaults to:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
timeo = 7
retrans = 3
acregmin = 3
acregmax = 60
acdirmin = 30
acdirmax = 60
flags = hard, nointr, noposix, cto, ac
:: Running Hook [archiso_pxe_common]
IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500
IP-Config: eth0 guessed broadcast address 192.168.0.255
IP-Config: eth0 guessed nameserver address 192.168.0.218
IP-Config: eth0 complete (from 192.168.0.218):
address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0
gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0
rootserver: 192.168.0.218 rootpath:
filename :
:: Running Hook [archiso_pxe_nbd]
:: Running Hook [archiso_pxe_curl]
:: Running Hook [archiso_pxe_nfs]
:: Mounting '192.168.0.77:/mnt/iso'
...
192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77)
...
My /etc/exports
/mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
|
|
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files.
The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it
(like in archiso_loop_mnt) in the ISO case, or just do a bind mount to
/run/archiso/bootmnt in the other case.
This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way
NBD is the default.
New bootparm:
* archiso_curl_url=(first form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form)
Use an absolute URL. Fetch the entire ISO
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form)
Use the as IP the same server where PXE reside. Fetch the entire ISO
* archiso_curl_url=(second form)
archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form)
Use an absolute URL. Where unpacked (an example name) is a directory where
${archisobasedir} ("arch" by default) is located with all *.sfs.
This fetch only needed files.
archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form)
Use the as IP the same server where PXE reside. Where unpacked (an example name)
is a directory where ${archisobasedir} ("arch" by default)
is located with all *.sfs. This fetch only needed files.
* curlspace_size= Set a size for a tmpfs filesystem where files are downloaded.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
One hook only setup the network device (archiso_pxe_common) the other
setup the NBD client (archiso_pxe_nbd).
New bootparam:
archiso_pxe_srv=IP
Allow to set an IP different from the PXE server.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
In this way allow to mount /run/archiso/bootmnt from another hook,
but still use the logic from the main mount_hook, skipping only this mount.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Now bootmnt/img_dev is always a ro-mount,
and cowspace is first ro-mount then rw-mount.
* Fix a "hidden" bug: at the time of test [[ -ef ]], if devices nodes
are not ready, such test will fail then archisodevice will mounted ro and
when cow_device is mounted to be rw it fails.
(I recently suffered this on a machine with slow USB)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* ipconfig cmd writes a file in /tmp that is ready for direct evaluation.
We can use this instead of parsing the output, to do this some variable
renames are needed.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Remove IDE stuff.
* Remove modules that can be added via relevant hooks.
* Replace sata with virtio in baseline profile.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
STATUS: Working (std boot, loop_mnt, pxe) with copytoram=[y|n].
NEEDS: initscript > 2011.07.3, mkinitcpio > 0.7.2, mkinitcpio-busybox > 1.18.5-1
Purpose: we need this for propertly unmount $cow_device,
used for persistent dm-snapshot devices.
This hook is based on work from Tom Gundersen[#1],
but adapted for archiso things (specially the shutdown script)
[#1] http://mailman.archlinux.org/pipermail/arch-projects/2011-July/001549.html
[#2] http://projects.archlinux.org/initscripts.git/commit/?id=1fa7b4b453e96533ae1db3630031285e5fc302b3
[#3] http://mailman.archlinux.org/pipermail/arch-projects/2011-August/001749.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This allow to take control again of these mountpoints outside initramfs.
(i.e: on deinitramfs stage at shutdown for unmount it)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* These files was added during developement stage of dm-snapshot branch
of archiso. Never was used, sinse archiso works directly with dmsetup
and with device nodes in /dev/mapper/
* Added 11-dm-initramfs.rules to keep dm info about nodes persistent
in udev db across initramfs/real-root.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This makes archiso_pxe_nbd functionallity full-independient from
archiso profiles (configs/*).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Use device mapper + snapshot module, instead union layer filesystem.
* A block-level approach vs vfs-level.
* No more unofficial (Linux) things.
* More memory is needed.
* Refactor mkarchiso.
* Refactor hooks/archiso.
* Fix install/archiso_pxe_nbd
(due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules())
[Thanks Dave for the improved workaround]
* New configs/releng to build official images.
* Works with a Bash script instead of Makefile.
(better control and easy to maintain)
* Remove configs/syslinux-iso.
* Remove archiso2dual script. Integrate functionality in configs/releng.
* New configs/baseline to build the most basic live medium or use as template.
* New README (draft). [Thanks Dieter for fixing english grammar]
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Add two parameters:
img_dev=/dev/sdNM
where /dev/sdNM is the device where .iso is located.
img_loop=/path/to/arch.iso
where /path/to/arch.iso is the full path of the .iso in the device img_dev.
Original idea from Baurzhan Muftakhidinov.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* squashfs images that will be part of read-only branchs for union mount in /
are mounted on /ro_branch/{image_name} instead of /tmpfs/mnt/{image_name}
(and avoid empty dirs on live env under /mnt)
* tmpfs that will be part of read-write branch for union mount in /
is mounted on /rw_branch instead of /tmpfs
* tmpfs that is for store *.sqfs images when copytoram=y, is mounted on
/copytoram instead of /tmpfs.sqfs
* tmpfs_size= parameter renamed to rw_branch_size=
* tmpfs_sqfs_size= parameter renamed to copytoram_size=
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Latest init script mounts a /dev FS, so /dev/loop0 will disappear.
Create loop0 on /lib/udev/devices so udev copy to /dev on startup.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
The archiso_pxe_nbd hook adds all network modules, including ones that
are not supported: The hook only supports ethernet devices, so there
is no need to add wireless, wimax, ppp, irda and plip modules.
Adding the wireless modules had an undesired side effect: The
wireless driver was loaded in the initramfs stage, where the
required crypto modules were unavailable. This caused the
initialization of the wireless devices to fail.
This patch removes all network modules except ethernet.
|
|
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
nbd (network block device utilities) package is required. This package is in AUR
at this moment: http://aur.archlinux.org/packages.php?ID=9691
Also mkinitcpio-nfs-utils is required for ipconfig.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Takes the advantage of already symlinks created on /dev/disk/by-label/ by
60-persistent-storage.rules add by udev hook.
Tested on:
* Real machine as CD-ROM and USB key drive.
* KVM as CD-ROM and DISK (for both modes, in combination with IDE and SCSI)
* VirtualBox as IDE CD-ROM.
IMPORTANT note: Since isohybrid is a hack, if more partitions are added to
USB key drive, filesystem on these partitions MUST have LABEL, otherwise
USB key will fail to boot. Anyway there is an option archisodevice=,
to force and specific device where live-media reside.
(Maybe isohybrid will change the hack method used in a future)
More info at:
http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000890.html
http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000913.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Fixes FS#17182: copytoram=y does not work with aufs
The solution is simple, just use a directory outside aufs tree.
* If copytoram=y, then another tmpfs is mounted but on /tmpfs.sqfs
* Add a new option: tmpfs_sqfs_size= (default to 75%)
* Lock cdrom drive is not locked if copytoram=y
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
To make compatible with disablehooks= param. Since "hook_archiso-early"
is not a valid variable name.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Make first /dev/loop0 device at archiso install hook.
* Remove unneeded losetup, all is done directly via mount.
* Images are now mounted on /tmpfs/mnt/image-name instead of
/tmpfs/mnt/loopN, removing unneeded counter.
* Add some variables to make code more readable.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Next version of mkinitcpio > 0.6.2 implements mount hook functionality.
So can avoid skipping normal flow of main init script, and removing common
end code with it.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
USB boot delay is now handled with the usbdelay kernel param (default=0)
We use the built in delay of usb-storage to control this. by setting the
module's delay param. If your USB device doesn't work on first boot, try
setting usbdelay=10 or so
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
