summaryrefslogtreecommitdiff
path: root/configs/releng/build.sh
diff options
context:
space:
mode:
authorGerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>2012-12-16 12:55:27 -0300
committerGerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>2012-12-21 15:01:01 -0300
commitf166038db845595d7022383da1a156968d58e2b1 (patch)
treecd090703adafff2c48fce696bae08219a20f96f7 /configs/releng/build.sh
parent89fe9b78ae8ee86b10f60a28fb5a74fe9fb04914 (diff)
downloadarchiso32-f166038db845595d7022383da1a156968d58e2b1.tar.xz
[configs/releng] Refactor build.sh: build only dual-iso
* This scripts, now runs only in x86_64. * build.sh does not require arguments to run (no more build, clean, purge). * /usr/share split is not done anymore: there are some differences between two arches. (ISO size +60MiB) * /usr/lib/modules split is not done anymore: this was never enabled officially in aitab. Tested and works fine. Maybe some small cosmetic changes needed. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Diffstat (limited to 'configs/releng/build.sh')
-rwxr-xr-xconfigs/releng/build.sh561
1 files changed, 183 insertions, 378 deletions
diff --git a/configs/releng/build.sh b/configs/releng/build.sh
index ca73e89..26ef895 100755
--- a/configs/releng/build.sh
+++ b/configs/releng/build.sh
@@ -6,314 +6,196 @@ iso_name=archlinux
iso_label="ARCH_$(date +%Y%m)"
iso_version=$(date +%Y.%m.%d)
install_dir=arch
-arch=$(uname -m)
work_dir=work
out_dir=out
-verbose=""
-cmd_args=""
+arch=$(uname -m)
+verbose=""
+pacman_conf=${work_dir}/pacman.conf
script_path=$(readlink -f ${0%/*})
-setup_workdir() {
- cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
- mkdir -p "${work_dir}"
- pacman_conf="${work_dir}/pacman.conf"
- sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${cache_dirs[@]})|g" \
- "${script_path}/pacman.conf" > "${pacman_conf}"
+_usage ()
+{
+ echo "usage ${0} [options]"
+ echo
+ echo " General options:"
+ echo " -N <iso_name> Set an iso filename (prefix)"
+ echo " Default: ${iso_name}"
+ echo " -V <iso_version> Set an iso version (in filename)"
+ echo " Default: ${iso_version}"
+ echo " -L <iso_label> Set an iso label (disk label)"
+ echo " Default: ${iso_label}"
+ echo " -D <install_dir> Set an install_dir (directory inside iso)"
+ echo " Default: ${install_dir}"
+ echo " -w <work_dir> Set the working directory"
+ echo " Default: ${work_dir}"
+ echo " -o <out_dir> Set the output directory"
+ echo " Default: ${out_dir}"
+ echo " -v Enable verbose output"
+ echo " -h This help message"
+ exit ${1}
}
-# Base installation (root-image)
+# Helper function to run make_*() only one time per architecture.
+run_once() {
+ if [[ ! -e ${work_dir}/build.${1}_${arch} ]]; then
+ $1
+ touch ${work_dir}/build.${1}_${arch}
+ fi
+}
+
+# Setup custom pacman.conf with current cache directories.
+make_pacman_conf() {
+ local _cache_dirs
+ _cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
+ sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${_cache_dirs[@]})|g" ${script_path}/pacman.conf > ${pacman_conf}
+}
+
+# Base installation, plus needed packages (root-image)
make_basefs() {
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" init
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -p "memtest86+ mkinitcpio-nfs-utils nbd" install
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" init
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" -p "memtest86+ mkinitcpio-nfs-utils nbd" install
}
# Additional packages (root-image)
make_packages() {
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -p "$(grep -h -v ^# ${script_path}/packages.{both,${arch}})" install
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" -p "$(grep -h -v ^# ${script_path}/packages.{both,${arch}})" install
}
-# Copy mkinitcpio archiso hooks (root-image)
+# Copy mkinitcpio archiso hooks and build initramfs (root-image)
make_setup_mkinitcpio() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- local _hook
- for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do
- cp /usr/lib/initcpio/hooks/${_hook} ${work_dir}/root-image/usr/lib/initcpio/hooks
- cp /usr/lib/initcpio/install/${_hook} ${work_dir}/root-image/usr/lib/initcpio/install
- done
- cp /usr/lib/initcpio/install/archiso_kms ${work_dir}/root-image/usr/lib/initcpio/install
- cp /usr/lib/initcpio/archiso_shutdown ${work_dir}/root-image/usr/lib/initcpio
- cp ${script_path}/mkinitcpio.conf ${work_dir}/root-image/etc/mkinitcpio-archiso.conf
- : > ${work_dir}/build.${FUNCNAME}
- fi
-}
-
-# Prepare ${install_dir}/boot/
-make_boot() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- local _src=${work_dir}/root-image
- local _dst_boot=${work_dir}/iso/${install_dir}/boot
- mkdir -p ${_dst_boot}/${arch}
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" \
- -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' \
- run
- mv ${_src}/boot/archiso.img ${_dst_boot}/${arch}/archiso.img
- mv ${_src}/boot/vmlinuz-linux ${_dst_boot}/${arch}/vmlinuz
- cp ${_src}/boot/memtest86+/memtest.bin ${_dst_boot}/memtest
- cp ${_src}/usr/share/licenses/common/GPL2/license.txt ${_dst_boot}/memtest.COPYING
- : > ${work_dir}/build.${FUNCNAME}
- fi
+ local _hook
+ for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do
+ cp /usr/lib/initcpio/hooks/${_hook} ${work_dir}/${arch}/root-image/usr/lib/initcpio/hooks
+ cp /usr/lib/initcpio/install/${_hook} ${work_dir}/${arch}/root-image/usr/lib/initcpio/install
+ done
+ cp /usr/lib/initcpio/install/archiso_kms ${work_dir}/${arch}/root-image/usr/lib/initcpio/install
+ cp /usr/lib/initcpio/archiso_shutdown ${work_dir}/${arch}/root-image/usr/lib/initcpio
+ cp ${script_path}/mkinitcpio.conf ${work_dir}/${arch}/root-image/etc/mkinitcpio-archiso.conf
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run
}
-make_efi() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- if [[ ${arch} == "x86_64" ]]; then
-
- mkdir -p ${work_dir}/iso/EFI/boot
- cp ${work_dir}/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/iso/EFI/boot/bootx64.efi
-
- mkdir -p ${work_dir}/iso/loader/entries
- cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/iso/loader/
- cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/iso/loader/entries/
- cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/iso/loader/entries/
+# Customize installation (root-image)
+make_customize_root_image() {
+ cp -af ${script_path}/root-image ${work_dir}/${arch}
- sed "s|%ARCHISO_LABEL%|${iso_label}|g;
- s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf > ${work_dir}/iso/loader/entries/archiso-x86_64.conf
+ patch ${work_dir}/${arch}/root-image/usr/bin/pacman-key < ${script_path}/pacman-key-4.0.3_unattended-keyring-init.patch
+ wget -O ${work_dir}/${arch}/root-image/etc/pacman.d/mirrorlist 'https://www.archlinux.org/mirrorlist/?country=all&protocol=http&use_mirror_status=on'
- # EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell )
- wget -O ${work_dir}/iso/EFI/shellx64_v2.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi
- # EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell )
- wget -O ${work_dir}/iso/EFI/shellx64_v1.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/EdkShellBinPkg/FullShell/X64/Shell_Full.efi
+ lynx -dump -nolist 'https://wiki.archlinux.org/index.php/Installation_Guide?action=render' >> ${work_dir}/${arch}/root-image/root/install.txt
- fi
- : > ${work_dir}/build.${FUNCNAME}
- fi
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}/${arch}" -C "${pacman_conf}" -D "${install_dir}" -r '/root/customize_root_image.sh' run
+ rm ${work_dir}/${arch}/root-image/root/customize_root_image.sh
}
-make_efiboot() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- if [[ ${arch} == "x86_64" ]]; then
-
- mkdir -p ${work_dir}/iso/EFI/archiso
- truncate -s 31M ${work_dir}/iso/EFI/archiso/efiboot.img
- mkfs.vfat -n ARCHISO_EFI ${work_dir}/iso/EFI/archiso/efiboot.img
-
- mkdir -p ${work_dir}/efiboot
- mount ${work_dir}/iso/EFI/archiso/efiboot.img ${work_dir}/efiboot
-
- mkdir -p ${work_dir}/efiboot/EFI/archiso
- cp ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz ${work_dir}/efiboot/EFI/archiso/vmlinuz.efi
- cp ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img ${work_dir}/efiboot/EFI/archiso/archiso.img
-
- mkdir -p ${work_dir}/efiboot/EFI/boot
- cp ${work_dir}/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/efiboot/EFI/boot/bootx64.efi
-
- mkdir -p ${work_dir}/efiboot/loader/entries
- cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/efiboot/loader/
- cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/efiboot/loader/entries/
- cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/efiboot/loader/entries/
-
- sed "s|%ARCHISO_LABEL%|${iso_label}|g;
- s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf > ${work_dir}/efiboot/loader/entries/archiso-x86_64.conf
-
- cp ${work_dir}/iso/EFI/shellx64_v2.efi ${work_dir}/efiboot/EFI/
- cp ${work_dir}/iso/EFI/shellx64_v1.efi ${work_dir}/efiboot/EFI/
-
- umount ${work_dir}/efiboot
+# Prepare kernel/initramfs ${install_dir}/boot/
+make_boot() {
+ mkdir -p ${work_dir}/iso/${install_dir}/boot/${arch}
+ cp ${work_dir}/${arch}/root-image/boot/archiso.img ${work_dir}/iso/${install_dir}/boot/${arch}/archiso.img
+ cp ${work_dir}/${arch}/root-image/boot/vmlinuz-linux ${work_dir}/iso/${install_dir}/boot/${arch}/vmlinuz
+}
- fi
- : > ${work_dir}/build.${FUNCNAME}
- fi
+# Add other aditional/extra files to ${install_dir}/boot/
+make_boot_extra() {
+ cp ${work_dir}/${arch}/root-image/boot/memtest86+/memtest.bin ${work_dir}/iso/${install_dir}/boot/memtest
+ cp ${work_dir}/${arch}/root-image/usr/share/licenses/common/GPL2/license.txt ${work_dir}/iso/${install_dir}/boot/memtest.COPYING
}
# Prepare /${install_dir}/boot/syslinux
make_syslinux() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- local _src_syslinux=${work_dir}/root-image/usr/lib/syslinux
- local _dst_syslinux=${work_dir}/iso/${install_dir}/boot/syslinux
- mkdir -p ${_dst_syslinux}
- for _cfg in ${script_path}/syslinux/*.cfg; do
- sed "s|%ARCHISO_LABEL%|${iso_label}|g;
- s|%INSTALL_DIR%|${install_dir}|g;
- s|%ARCH%|${arch}|g" ${_cfg} > ${_dst_syslinux}/${_cfg##*/}
- done
- cp ${script_path}/syslinux/splash.png ${_dst_syslinux}
- cp ${_src_syslinux}/*.c32 ${_dst_syslinux}
- cp ${_src_syslinux}/*.com ${_dst_syslinux}
- cp ${_src_syslinux}/*.0 ${_dst_syslinux}
- cp ${_src_syslinux}/memdisk ${_dst_syslinux}
- mkdir -p ${_dst_syslinux}/hdt
- cat ${work_dir}/root-image/usr/share/hwdata/pci.ids | gzip -9 > ${_dst_syslinux}/hdt/pciids.gz
- cat ${work_dir}/root-image/usr/lib/modules/*-ARCH/modules.alias | gzip -9 > ${_dst_syslinux}/hdt/modalias.gz
- : > ${work_dir}/build.${FUNCNAME}
- fi
+ mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux
+ for _cfg in ${script_path}/syslinux/*.cfg; do
+ sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+ s|%INSTALL_DIR%|${install_dir}|g" ${_cfg} > ${work_dir}/iso/${install_dir}/boot/syslinux/${_cfg##*/}
+ done
+ cp ${script_path}/syslinux/splash.png ${work_dir}/iso/${install_dir}/boot/syslinux
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/*.c32 ${work_dir}/iso/${install_dir}/boot/syslinux
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/*.com ${work_dir}/iso/${install_dir}/boot/syslinux
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/*.0 ${work_dir}/iso/${install_dir}/boot/syslinux
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/memdisk ${work_dir}/iso/${install_dir}/boot/syslinux
+ mkdir -p ${work_dir}/iso/${install_dir}/boot/syslinux/hdt
+ gzip -c -9 ${work_dir}/${arch}/root-image/usr/share/hwdata/pci.ids > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/pciids.gz
+ gzip -c -9 ${work_dir}/${arch}/root-image/usr/lib/modules/*-ARCH/modules.alias > ${work_dir}/iso/${install_dir}/boot/syslinux/hdt/modalias.gz
}
# Prepare /isolinux
make_isolinux() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- mkdir -p ${work_dir}/iso/isolinux
- sed "s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/isolinux/isolinux.cfg > ${work_dir}/iso/isolinux/isolinux.cfg
- cp ${work_dir}/root-image/usr/lib/syslinux/isolinux.bin ${work_dir}/iso/isolinux/
- cp ${work_dir}/root-image/usr/lib/syslinux/isohdpfx.bin ${work_dir}/iso/isolinux/
- : > ${work_dir}/build.${FUNCNAME}
- fi
+ mkdir -p ${work_dir}/iso/isolinux
+ sed "s|%INSTALL_DIR%|${install_dir}|g" ${script_path}/isolinux/isolinux.cfg > ${work_dir}/iso/isolinux/isolinux.cfg
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/isolinux.bin ${work_dir}/iso/isolinux/
+ cp ${work_dir}/${arch}/root-image/usr/lib/syslinux/isohdpfx.bin ${work_dir}/iso/isolinux/
}
-# Customize installation (root-image)
-make_customize_root_image() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- cp -af ${script_path}/root-image ${work_dir}
-
- patch ${work_dir}/root-image/usr/bin/pacman-key < ${script_path}/pacman-key-4.0.3_unattended-keyring-init.patch
- wget -O ${work_dir}/root-image/etc/pacman.d/mirrorlist 'https://www.archlinux.org/mirrorlist/?country=all&protocol=http&use_mirror_status=on'
-
- lynx -dump -nolist 'https://wiki.archlinux.org/index.php/Installation_Guide?action=render' >> ${work_dir}/root-image/root/install.txt
-
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -r '/root/customize_root_image.sh' run
- rm ${work_dir}/root-image/root/customize_root_image.sh
- : > ${work_dir}/build.${FUNCNAME}
- fi
-}
-
-# Split out /usr/lib/modules from root-image (makes more "dual-iso" friendly)
-make_usr_lib_modules() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- mv ${work_dir}/root-image/usr/lib/modules ${work_dir}/usr-lib-modules
- : > ${work_dir}/build.${FUNCNAME}
- fi
+# Prepare /EFI
+make_efi() {
+ mkdir -p ${work_dir}/iso/EFI/boot
+ cp ${work_dir}/x86_64/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/iso/EFI/boot/bootx64.efi
+
+ mkdir -p ${work_dir}/iso/loader/entries
+ cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/iso/loader/
+ cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/iso/loader/entries/
+ cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/iso/loader/entries/
+
+ sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+ s|%INSTALL_DIR%|${install_dir}|g" \
+ ${script_path}/efiboot/loader/entries/archiso-x86_64-usb.conf > ${work_dir}/iso/loader/entries/archiso-x86_64.conf
+
+ # EFI Shell 2.0 for UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=UEFI_Shell )
+ wget -O ${work_dir}/iso/EFI/shellx64_v2.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/ShellBinPkg/UefiShell/X64/Shell.efi
+ # EFI Shell 1.0 for non UEFI 2.3+ ( http://sourceforge.net/apps/mediawiki/tianocore/index.php?title=Efi-shell )
+ wget -O ${work_dir}/iso/EFI/shellx64_v1.efi https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2/EdkShellBinPkg/FullShell/X64/Shell_Full.efi
}
-# Split out /usr/share from root-image (makes more "dual-iso" friendly)
-make_usr_share() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- mv ${work_dir}/root-image/usr/share ${work_dir}/usr-share
- : > ${work_dir}/build.${FUNCNAME}
- fi
-}
+# Prepare efiboot.img::/EFI for "El Torito" EFI boot mode
+make_efiboot() {
+ mkdir -p ${work_dir}/iso/EFI/archiso
+ truncate -s 31M ${work_dir}/iso/EFI/archiso/efiboot.img
+ mkfs.vfat -n ARCHISO_EFI ${work_dir}/iso/EFI/archiso/efiboot.img
-# Process aitab
-make_aitab() {
- if [[ ! -e ${work_dir}/build.${FUNCNAME} ]]; then
- sed "s|%ARCH%|${arch}|g" ${script_path}/aitab > ${work_dir}/iso/${install_dir}/aitab
- : > ${work_dir}/build.${FUNCNAME}
- fi
-}
+ mkdir -p ${work_dir}/efiboot
+ mount ${work_dir}/iso/EFI/archiso/efiboot.img ${work_dir}/efiboot
-# Build all filesystem images specified in aitab (.fs .fs.sfs .sfs)
-make_prepare() {
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" pkglist
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" prepare
-}
+ mkdir -p ${work_dir}/efiboot/EFI/archiso
+ cp ${work_dir}/iso/${install_dir}/boot/x86_64/vmlinuz ${work_dir}/efiboot/EFI/archiso/vmlinuz.efi
+ cp ${work_dir}/iso/${install_dir}/boot/x86_64/archiso.img ${work_dir}/efiboot/EFI/archiso/archiso.img
-# Build ISO
-make_iso() {
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" checksum
- mkarchiso ${verbose} -w "${work_dir}" -C "${pacman_conf}" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-${arch}.iso"
-}
+ mkdir -p ${work_dir}/efiboot/EFI/boot
+ cp ${work_dir}/x86_64/root-image/usr/lib/gummiboot/gummibootx64.efi ${work_dir}/efiboot/EFI/boot/bootx64.efi
-# Build dual-iso images from ${work_dir}/i686/iso and ${work_dir}/x86_64/iso
-make_dual() {
- if [[ ! -e ${work_dir}/dual/build.${FUNCNAME} ]]; then
- if [[ ! -d ${work_dir}/i686/iso || ! -d ${work_dir}/x86_64/iso ]]; then
- echo "ERROR: i686 or x86_64 builds does not exist."
- _usage 1
- fi
- mkdir -p ${work_dir}/dual/iso
- cp -a -l -f ${work_dir}/x86_64/iso ${work_dir}/dual
- cp -a -l -n ${work_dir}/i686/iso ${work_dir}/dual
- rm -f ${work_dir}/dual/iso/${install_dir}/aitab
- rm -f ${work_dir}/dual/iso/${install_dir}/boot/syslinux/*.cfg
- paste -d"\n" <(sed "s|%ARCH%|i686|g" ${script_path}/aitab) \
- <(sed "s|%ARCH%|x86_64|g" ${script_path}/aitab) | uniq > ${work_dir}/dual/iso/${install_dir}/aitab
- for _cfg in ${script_path}/syslinux.dual/*.cfg; do
- sed "s|%ARCHISO_LABEL%|${iso_label}|g;
- s|%INSTALL_DIR%|${install_dir}|g" ${_cfg} > ${work_dir}/dual/iso/${install_dir}/boot/syslinux/${_cfg##*/}
- done
- mkarchiso ${verbose} -w "${work_dir}/dual" -D "${install_dir}" checksum
- mkarchiso ${verbose} -w "${work_dir}/dual" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-dual.iso"
- : > ${work_dir}/dual/build.${FUNCNAME}
- fi
-}
+ mkdir -p ${work_dir}/efiboot/loader/entries
+ cp ${script_path}/efiboot/loader/loader.conf ${work_dir}/efiboot/loader/
+ cp ${script_path}/efiboot/loader/entries/uefi-shell-v2-x86_64.conf ${work_dir}/efiboot/loader/entries/
+ cp ${script_path}/efiboot/loader/entries/uefi-shell-v1-x86_64.conf ${work_dir}/efiboot/loader/entries/
-purge_single ()
-{
- if [[ -d ${work_dir} ]]; then
- find ${work_dir} -mindepth 1 -maxdepth 1 \
- ! -path ${work_dir}/iso -prune \
- | xargs rm -rf
- fi
-}
+ sed "s|%ARCHISO_LABEL%|${iso_label}|g;
+ s|%INSTALL_DIR%|${install_dir}|g" \
+ ${script_path}/efiboot/loader/entries/archiso-x86_64-cd.conf > ${work_dir}/efiboot/loader/entries/archiso-x86_64.conf
-purge_dual ()
-{
- if [[ -d ${work_dir}/dual ]]; then
- find ${work_dir}/dual -mindepth 1 -maxdepth 1 \
- ! -path ${work_dir}/dual/iso -prune \
- | xargs rm -rf
- fi
-}
+ cp ${work_dir}/iso/EFI/shellx64_v2.efi ${work_dir}/efiboot/EFI/
+ cp ${work_dir}/iso/EFI/shellx64_v1.efi ${work_dir}/efiboot/EFI/
-clean_single ()
-{
- rm -rf ${work_dir}
- rm -f ${out_dir}/${iso_name}-${iso_version}-*-${arch}.iso
+ umount ${work_dir}/efiboot
}
-clean_dual ()
-{
- rm -rf ${work_dir}/dual
- rm -f ${out_dir}/${iso_name}-${iso_version}-*-dual.iso
+# Copy aitab
+make_aitab() {
+ mkdir -p ${work_dir}/iso/${install_dir}
+ cp ${script_path}/aitab ${work_dir}/iso/${install_dir}/aitab
}
-make_common_single() {
- make_basefs
- make_packages
- make_setup_mkinitcpio
- make_boot
- make_efi
- make_efiboot
- make_syslinux
- make_isolinux
- make_customize_root_image
- make_usr_lib_modules
- make_usr_share
- make_aitab
- make_prepare
- make_iso
+# Build all filesystem images specified in aitab (.fs.sfs .sfs)
+make_prepare() {
+ cp -a -l -f ${work_dir}/${arch}/root-image ${work_dir}
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" pkglist
+ setarch ${arch} mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" prepare
+ rm -rf ${work_dir}/root-image
+ # rm -rf ${work_dir}/${arch}/root-image (if low space, this helps)
}
-_usage ()
-{
- echo "usage ${0} [options] command <command options>"
- echo
- echo " General options:"
- echo " -N <iso_name> Set an iso filename (prefix)"
- echo " Default: ${iso_name}"
- echo " -V <iso_version> Set an iso version (in filename)"
- echo " Default: ${iso_version}"
- echo " -L <iso_label> Set an iso label (disk label)"
- echo " Default: ${iso_label}"
- echo " -D <install_dir> Set an install_dir (directory inside iso)"
- echo " Default: ${install_dir}"
- echo " -w <work_dir> Set the working directory"
- echo " Default: ${work_dir}"
- echo " -o <out_dir> Set the output directory"
- echo " Default: ${out_dir}"
- echo " -v Enable verbose output"
- echo " -h This help message"
- echo
- echo " Commands:"
- echo " build <mode>"
- echo " Build selected .iso by <mode>"
- echo " purge <mode>"
- echo " Clean working directory except iso/ directory of build <mode>"
- echo " clean <mode>"
- echo " Clean working directory and .iso file in output directory of build <mode>"
- echo
- echo " Command options:"
- echo " <mode> Valid values 'single', 'dual' or 'all'"
- exit ${1}
+# Build ISO
+make_iso() {
+ mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" checksum
+ mkarchiso ${verbose} -w "${work_dir}" -D "${install_dir}" -L "${iso_label}" -o "${out_dir}" iso "${iso_name}-${iso_version}-dual.iso"
}
if [[ ${EUID} -ne 0 ]]; then
@@ -321,132 +203,55 @@ if [[ ${EUID} -ne 0 ]]; then
_usage 1
fi
+if [[ ${arch} != x86_64 ]]; then
+ echo "This script needs to be run on x86_64"
+ _usage 1
+fi
+
while getopts 'N:V:L:D:w:o:vh' arg; do
case "${arg}" in
- N)
- iso_name="${OPTARG}"
- cmd_args+=" -N ${iso_name}"
- ;;
- V)
- iso_version="${OPTARG}"
- cmd_args+=" -V ${iso_version}"
- ;;
- L)
- iso_label="${OPTARG}"
- cmd_args+=" -L ${iso_label}"
- ;;
- D)
- install_dir="${OPTARG}"
- cmd_args+=" -D ${install_dir}"
- ;;
- w)
- work_dir="${OPTARG}"
- cmd_args+=" -w ${work_dir}"
- ;;
- o)
- out_dir="${OPTARG}"
- cmd_args+=" -o ${out_dir}"
- ;;
- v)
- verbose="-v"
- cmd_args+=" -v"
- ;;
- h|?) _usage 0 ;;
+ N) iso_name="${OPTARG}" ;;
+ V) iso_version="${OPTARG}" ;;
+ L) iso_label="${OPTARG}" ;;
+ D) install_dir="${OPTARG}" ;;
+ w) work_dir="${OPTARG}" ;;
+ o) out_dir="${OPTARG}" ;;
+ v) verbose="-v" ;;
+ h) _usage 0 ;;
*)
- _msg_error "Invalid argument '${arg}'" 0
- _usage 1
- ;;
+ echo "Invalid argument '${arg}'"
+ _usage 1
+ ;;
esac
done
-shift $((OPTIND - 1))
+mkdir -p ${work_dir}
-if [[ $# -lt 1 ]]; then
- echo "No command specified"
- _usage 1
-fi
-command_name="${1}"
+run_once make_pacman_conf
-if [[ $# -lt 2 ]]; then
- echo "No command mode specified"
- _usage 1
-fi
-command_mode="${2}"
+# Do all stuff for each root-image
+for arch in i686 x86_64; do
+ run_once make_basefs
+ run_once make_packages
+ run_once make_setup_mkinitcpio
+ run_once make_customize_root_image
+done
-if [[ ${command_mode} == "all" && ${arch} != "x86_64" ]]; then
- echo "This mode <all> needs to be run on x86_64"
- _usage 1
-fi
+for arch in i686 x86_64; do
+ run_once make_boot
+done
-if [[ ${command_mode} == "single" ]]; then
- work_dir=${work_dir}/${arch}
-fi
+# Do all stuff for "iso"
+run_once make_boot_extra
+run_once make_syslinux
+run_once make_isolinux
+run_once make_efi
+run_once make_efiboot
+
+run_once make_aitab
+
+for arch in i686 x86_64; do
+ run_once make_prepare
+done
-setup_workdir
-
-case "${command_name}" in
- build)
- case "${command_mode}" in
- single)
- make_common_single
- ;;
- dual)
- make_dual
- ;;
- all)
- $0 ${cmd_args} build single
- $0 ${cmd_args} purge single
- linux32 $0 ${cmd_args} build single
- linux32 $0 ${cmd_args} purge single
- $0 ${cmd_args} build dual
- $0 ${cmd_args} purge dual
- ;;
- *)
- echo "Invalid build mode '${command_mode}'"
- _usage 1
- ;;
- esac
- ;;
- purge)
- case "${command_mode}" in
- single)
- purge_single
- ;;
- dual)
- purge_dual
- ;;
- all)
- $0 ${cmd_args} purge single
- linux32 $0 ${cmd_args} purge single
- $0 ${cmd_args} purge dual
- ;;
- *)
- echo "Invalid purge mode '${command_mode}'"
- _usage 1
- ;;
- esac
- ;;
- clean)
- case "${command_mode}" in
- single)
- clean_single
- ;;
- dual)
- clean_dual
- ;;
- all)
- $0 ${cmd_args} clean single
- linux32 $0 ${cmd_args} clean single
- $0 ${cmd_args} clean dual
- ;;
- *)
- echo "Invalid clean mode '${command_mode}'"
- _usage 1
- ;;
- esac
- ;;
- *)
- echo "Invalid command name '${command_name}'"
- _usage 1
- ;;
-esac
+run_once make_iso